Wraps by car

Audi 920 wrap

The Audi 920 wrap page covers the single generation built from 1938 to 1940. A full vinyl wrap of this classic body needs about 59 feet (18 meters) of 60-inch (1.52 meter) cast film.

1generations18 mof film for a full wrap

Audi 920, first generation, factory photo
Audi 920, first generation. Factory color shown.

Audi 920 wrap colors and ideas

  • Audi 920 black wrap
  • Audi 920 white wrap
  • Audi 920 gray wrap
  • Audi 920 silver wrap
  • Audi 920 red wrap
  • Audi 920 blue wrap
  • Audi 920 green wrap
  • Audi 920 yellow wrap
  • Audi 920 orange wrap
  • Audi 920 purple wrap
  • Audi 920 pink wrap
  • Audi 920 teal wrap
  • Audi 920 brown wrap
  • Audi 920 gold wrap
  • Audi 920 chrome wrap
  • Audi 920 color shift wrap
  • Audi 920 carbon fiber wrap
  • Audi 920 camo and patterned wrap

How much vinyl to wrap an Audi 920

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1938–1940convertible, sedan (2 or 4 doors)192.7 in (4,895 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Audi 920 wrap cost factors

The Audi 920 wrap cost depends on the size of the car and the chosen film, not on a single set figure. A full coverage uses about 59 feet (18 meters) of cast film, while chrome or patterned film calls for about 69 feet (21 meters). More film, more cut-outs, and more bodywork preparation raise the cost.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: convertible, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Audi 920 wraps by generation

Swipe sideways. Tap a card for the full description.

Audi 920, first generation, factory photo
Factory color shown

1938–1940 Audi 920 convertible, sedan (first generation)

1938–1940convertible, sedan (2 or 4 doors)192.7 in (4,895 mm)

The first-generation Audi 920 has an open top that is handled differently in a wrap. The fabric top is not covered, and the film ends where the top begins, with a clean edge. If the car has a folding hard top, each panel of that top is wrapped separately.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Audi 920

An Audi 920 can receive smaller jobs instead of a full color change. A partial wrap covers the roof, hood, or mirror caps, while a chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Audi 920: body, cut-outs and film

An Audi 920 vinyl wrap has to follow the long 192.7-inch (4,895-mm) body and its separate fenders. Both convertible and sedan styles are wrapped as individual panels, so the installer cuts film around the doors and the fabric top. The two-door and four-door sedans differ only in door count, not in wrap coverage.

Clear film and color film work well for an Audi 920, but some areas need extra care. The fabric top on a convertible is not wrapped, and the film ends cleanly where the top begins. Door handles and badges are removed for a smooth finish.

When counting how much vinyl to wrap an Audi 920, the only generation is the 1938–1940 body. The film estimate stays the same for the convertible and the sedan, since the roof area is small. A patterned or chrome film needs about 69 feet (21 meters) because of pattern matching.

Questions about wrapping an Audi 920

How much vinyl does it take to wrap an Audi 920?

It takes about 59 feet (18 meters) of 60-inch (1.52 meter) cast film to wrap an Audi 920. This estimate is for the full body of the 1938–1940 generation.

Is the top of an Audi 920 wrapped?

No, the fabric top of an Audi 920 is not wrapped. The film ends where the fabric top begins, and a folding hard top is wrapped as separate panels.

Which Audi 920 body takes more film?

The convertible and the sedan of the Audi 920 take the same amount of film for a full wrap. The film estimate is about 59 feet (18 meters) for either body style.

Can I wrap only the hood or the roof of an Audi 920?

Yes, you can wrap only the hood or the roof of an Audi 920. A partial wrap covers the roof, hood, or mirror caps as a smaller job.