Wraps by car

Audi A1 wrap

This page covers the Audi A1 wrap for both generations, the second generation 2018–now and the first generation 2010–2018. A full vinyl wrap of the newest A1 body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 59 ft (18 m) on the same body.

2generations14.5 mof film for a full wrap

Audi A1, second generation, factory photo
Audi A1, second generation. Factory color shown.

Audi A1 wrap colors and ideas

  • Audi A1 black wrap
  • Audi A1 white wrap
  • Audi A1 gray wrap
  • Audi A1 silver wrap
  • Audi A1 red wrap
  • Audi A1 blue wrap
  • Audi A1 green wrap
  • Audi A1 yellow wrap
  • Audi A1 orange wrap
  • Audi A1 purple wrap
  • Audi A1 pink wrap
  • Audi A1 teal wrap
  • Audi A1 brown wrap
  • Audi A1 gold wrap
  • Audi A1 chrome wrap
  • Audi A1 color shift wrap
  • Audi A1 carbon fiber wrap
  • Audi A1 camo and patterned wrap

How much vinyl to wrap an Audi A1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowhatchback (5 doors)158.6 in (4,029 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
2010–2018hatchback (3 or 5 doors)155.7 in (3,954 mm) to 156.4 in (3,973 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Audi A1 wrap cost factors

The Audi A1 wrap cost depends on how much film the body needs and how many cut-outs the installer has to make. A second-generation car takes about 48 ft (14.5 m) of cast film, while a first-generation car takes about 46 ft (14 m). Chrome or patterned film increases the amount by roughly 20 percent. The final figure also depends on how many sensors, fog lamps and roof details the specific trim has.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Audi A1 wraps by generation

Swipe sideways. Tap a card for the full description.

Audi A1, second generation, factory photo
Factory color shown

2018–now Audi A1 hatchback (second generation)

2018–nowhatchback (5 doors)158.6 in (4,029 mm)

The second-generation Audi A1 wrap faces one choice that owners of some trims make before the film is ordered. A two-tone body from the factory means the roof is a second color, and the wrap either keeps that split or covers it. Keeping the split saves film and highlights the original design. Covering it gives one color across the whole body.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Audi A1, first generation, factory photo
Factory color shown

2010–2018 Audi A1 hatchback (first generation)

2010–2018hatchback (3 or 5 doors)155.7 in (3,954 mm) to 156.4 in (3,973 mm)

The first-generation Audi A1 wrap calls for a paint check because panels on a car of these years may be original or repainted. A test spot comes before a full wrap to see how the film sticks to the painted surface. The 2014 restyle did not change the film amount in a major way, but the later bumpers have slightly different contours. Wrapping a car with original paint is more straightforward than one with mixed panel history.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Audi A1

An Audi A1 chrome delete covers the window trim and badges with black film to remove the bright finish. A partial wrap can cover the roof, hood or mirror caps on their own. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi A1: body, cut-outs and film

The Audi A1 vinyl wrap is sized around a subcompact hatchback body, 158.6 in (4,029 mm) long on the second generation. Five doors and the tall tailgate add surface area that a short car does not show at first glance. The first generation is slightly shorter at 155.7 in (3,954 mm) to 156.4 in (3,973 mm) and comes with three or five doors. A full wrap therefore uses a similar amount of film on both generations.

Audi A1 wrap ideas start with the tailgate, where the film ends at the edge of the rear glass. Some trims have factory two-tone bodies, so the wrap either keeps that roof split or covers it. Parking sensors on some bumpers need a cut-out around each sensor. Fog lamps on every second-generation trim require cut-outs in the bumper film.

How much vinyl to wrap an Audi A1 depends on the generation, because the second generation is longer and only comes with five doors. The first generation has more length spread across its 2010–2018 production run, while a restyle in 2014 changed the bumpers slightly. A wrapper counts the body panels rather than the overall length when ordering film. The two generations need roughly the same amount of vinyl for a full color change.

Questions about wrapping an Audi A1

How much vinyl does it take to wrap an Audi A1?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap the newest Audi A1 body. That figure covers a full color change on the second generation 2018–now. Chrome or patterned film needs more material, about 59 ft (18 m).

Can I wrap only the hood or the roof of an Audi A1?

Yes, you can wrap only the hood or the roof of an Audi A1. A partial wrap on the roof, hood or mirror caps is a separate job from a full wrap. The roof wrap on a two-tone car can either match the existing second color or cover it.

Is an Audi A1 hard to wrap?

An Audi A1 is not the hardest car to wrap, but its tailgate and bumper details add work. The rear glass sits inside the tailgate, so the film ends at the edge of the glass. Fog lamps and parking sensors on some trims need careful cut-outs. Roof rails on some first-generation cars come off before the roof is wrapped.

How many generations of the Audi A1 does this page cover?

This page covers two generations of the Audi A1. The first generation ran from 2010 to 2018 and the second generation from 2018 to now. Each generation has its own film estimate and wrap facts.