Wraps by car

Audi Cabriolet wrap

The Audi Cabriolet wrap page covers the first-generation convertible built from 1991 to 2000. A vinyl wrap of this mid-size car uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 52 ft (16 m).

1generations14 mof film for a full wrap

Audi Cabriolet, first generation, factory photo
Audi Cabriolet, first generation. Factory color shown.

Audi Cabriolet wrap colors and ideas

  • Cabriolet black wrap
  • Cabriolet white wrap
  • Cabriolet gray wrap
  • Cabriolet silver wrap
  • Cabriolet red wrap
  • Cabriolet blue wrap
  • Cabriolet green wrap
  • Cabriolet yellow wrap
  • Cabriolet orange wrap
  • Cabriolet purple wrap
  • Cabriolet pink wrap
  • Cabriolet teal wrap
  • Cabriolet brown wrap
  • Cabriolet gold wrap
  • Cabriolet chrome wrap
  • Cabriolet color shift wrap
  • Cabriolet carbon fiber wrap
  • Cabriolet camo and patterned wrap

How much vinyl to wrap an Audi Cabriolet

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–2000convertible (2 doors)171.9 in (4,366 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Cabriolet wrap cost factors

Cabriolet wrap cost depends on the film type and the amount of disassembly. This car needs about 46 ft (14 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film pushes the estimate to about 52 ft (16 m). The two-door convertible body has fewer panels than a sedan, but the fabric top area adds masking time.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Cabriolet wraps by generation

Swipe sideways. Tap a card for the full description.

Audi Cabriolet, first generation, factory photo
Factory color shown

1991–2000 Cabriolet convertible (first generation)

1991–2000convertible (2 doors)171.9 in (4,366 mm)

The first-generation Audi Cabriolet has a fabric convertible top that is not wrapped. The film ends exactly where the top starts, so the installer must mask that edge carefully. The top is left as it is, and the vinyl covers the painted body panels only.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Cabriolet

A Cabriolet chrome delete covers the window trim and badges with black film. A partial wrap can include the hood, mirror caps, and rear deck. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Audi Cabriolet: body, cut-outs and film

An Audi Cabriolet vinyl wrap follows the lines of a two-door convertible body. The car is 171.9 in (4,366 mm) long, which is a typical mid-size footprint for film estimating. The fabric top is not wrapped, so the film stops at the edge of the top.

Cabriolet wrap ideas work best when you plan the cut-outs first. The door handles, mirrors, and antenna need relief cuts or removal. The fabric top area needs careful masking so the film ends cleanly where the top begins.

How much vinyl to wrap a Cabriolet stays the same across this generation. Audi built the 8G body from 1991 to 2000 with no major shape changes. A full wrap of the newest body takes about 46 ft (14 m) of standard cast film.

Questions about wrapping an Audi Cabriolet

How much vinyl does it take to wrap an Audi Cabriolet?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap an Audi Cabriolet. With chrome or patterned film, the estimate is about 52 ft (16 m).

Is the top of a Cabriolet wrapped?

No, the top of a Cabriolet is not wrapped. The fabric top is left untouched and the vinyl film ends where the top begins.

Can I wrap only the hood or the roof of a Cabriolet?

Yes, you can wrap only the hood, mirror caps, or rear deck. A partial wrap of the Audi Cabriolet lets you change selected panels without a full color change.

Is a Cabriolet hard to wrap?

A Cabriolet adds some work because of the fabric top edge that must be masked carefully. The mid-size body is 171.9 in (4,366 mm) long, which is a normal size for a two-door convertible. The main challenge is managing the transition from film to fabric without a visible seam.