Wraps by car

Audi Coupe wrap

An Audi Coupe wrap is a full vinyl wrap cut and fitted to this mid-size two-door coupe. The catalog covers two generations of the Audi Coupe: the 1980–1988 first generation and the 1988–1996 second generation. A general estimate for a full wrap of the newest body is about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

2generations14 mof film for a full wrap

Audi Coupe, second generation, factory photo
Audi Coupe, second generation. Factory color shown.

Audi Coupe wrap colors and ideas

  • Coupe black wrap
  • Coupe white wrap
  • Coupe gray wrap
  • Coupe silver wrap
  • Coupe red wrap
  • Coupe blue wrap
  • Coupe green wrap
  • Coupe yellow wrap
  • Coupe orange wrap
  • Coupe purple wrap
  • Coupe pink wrap
  • Coupe teal wrap
  • Coupe brown wrap
  • Coupe gold wrap
  • Coupe chrome wrap
  • Coupe color shift wrap
  • Coupe carbon fiber wrap
  • Coupe camo and patterned wrap

How much vinyl to wrap an Audi Coupe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1996coupe (2 doors)171.9 in (4,366 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1980–1988coupe (2 doors)174.1 in (4,421 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Coupe wrap cost factors

Coupe wrap cost depends on the size of the car, the film chosen and the condition of the paint. The Audi Coupe is a mid-size two-door with a length between 171.9 in (4,366 mm) and 174.1 in (4,421 mm), so it needs about 46 to 48 ft (14 to 14.5 m) of cast film. Chrome or patterned film raises the amount of film to about 59 ft (18 m), and old paint may need extra preparation.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Restyled in 1991: bumpers and lights differ between the versions, and so do the film cuts.

Coupe wraps by generation

Swipe sideways. Tap a card for the full description.

Audi Coupe, second generation, factory photo
Factory color shown

1988–1996 Coupe coupe (second generation)

1988–1996coupe (2 doors)171.9 in (4,366 mm)

The second-generation Audi Coupe was produced from 1988 to 1996 and was restyled in 1991. The 1991 restyling changed the bumpers and lights, so film cut for one version does not fit the other. A wrap job on this generation starts with the two long side doors, where each door is one large piece of film.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Audi Coupe, first generation, factory photo
Factory color shown

1980–1988 Coupe coupe (first generation)

1980–1988coupe (2 doors)174.1 in (4,421 mm)

The first-generation Audi Coupe was produced from 1980 to 1988 and was restyled in 1984. Paint age matters on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. This generation is mid-size with two long side doors, and each door is wrapped as one large piece of film.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Coupe

A partial wrap on an Audi Coupe can cover the roof, the hood or the mirror caps as single jobs. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Audi Coupe: body, cut-outs and film

An Audi Coupe vinyl wrap is shaped by a coupe body with two long side doors and a length between 171.9 in (4,366 mm) and 174.1 in (4,421 mm). Each side door is one large piece of film, so a clean install relies on a good squeegee technique and enough working time. The rest of the body is conventional: a trunk lid, hood, roof and a one-piece front bumper.

Coupe wrap ideas begin with the parts that come off for a neat edge. The side mirrors, door handles and badges are removed before film goes on. The window trim and any emblems need cut-outs if they stay in place.

How much vinyl to wrap a Coupe changes between the two generations. The second-generation B3 body from 1988 needs about 46 ft (14 m) of 60-inch (1.52 m) cast film. The first-generation B2 body from 1980 needs about 48 ft (14.5 m) of the same film width. Chrome or patterned film adds waste, so either generation is planned with about 59 ft (18 m).

Questions about wrapping an Audi Coupe

How much vinyl does it take to wrap an Audi Coupe?

Yes, a full wrap of an Audi Coupe takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. That figure is for the newest body in the catalog, the 1988–1996 second generation. The earlier 1980–1988 body is close at about 46 ft (14 m) of the same film.

Which years of the Coupe take the same film cuts?

Yes, the second-generation Audi Coupe keeps the same film cuts from 1988 through 1996. The first-generation car changes at its 1984 restyling, so 1980–1983 and 1984–1988 are two different sets of cuts.

Can I wrap only the hood or the roof of a Coupe?

Yes, a partial wrap job for the hood or the roof is a standard way to wrap an Audi Coupe. The roof and hood are flat enough to be wrapped as single panels. Mirror caps and chrome delete are also available as partial jobs.

Is a Coupe hard to wrap?

Yes, an Audi Coupe takes a little more work because the two side doors are long. Each door is one large piece of film, which makes handling the film the main task. The car itself is mid-size with a length around 171.9 in (4,366 mm) to 174.1 in (4,421 mm), so the rest of the wrap is straightforward.