Wraps by car

Audi Quattro wrap

The Audi Quattro wrap covers one generation of this sports car, the first generation built from 1980 to 1991. A full color change on the coupe body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 59 ft (18 m).

1generations14.5 mof film for a full wrap

Audi Quattro, first generation, factory photo
Audi Quattro, first generation. Factory color shown.

Audi Quattro wrap colors and ideas

  • Quattro black wrap
  • Quattro white wrap
  • Quattro gray wrap
  • Quattro silver wrap
  • Quattro red wrap
  • Quattro blue wrap
  • Quattro green wrap
  • Quattro yellow wrap
  • Quattro orange wrap
  • Quattro purple wrap
  • Quattro pink wrap
  • Quattro teal wrap
  • Quattro brown wrap
  • Quattro gold wrap
  • Quattro chrome wrap
  • Quattro color shift wrap
  • Quattro carbon fiber wrap
  • Quattro camo and patterned wrap

How much vinyl to wrap an Audi Quattro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1980–1991coupe (2 doors)173.4 in (4,404 mm) to 173.4 in (4,405 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Quattro wrap cost factors

Quattro wrap cost depends on the film type, with about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film raises the amount to about 59 ft (18 m). The cost also reflects the two large door panels and the 1985 bumper and light differences.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Restyled in 1985: bumpers and lights differ between the versions, and so do the film cuts.

Quattro wraps by generation

Swipe sideways. Tap a card for the full description.

Audi Quattro, first generation, factory photo
Factory color shown

1980–1991 Quattro coupe (first generation)

1980–1991coupe (2 doors)173.4 in (4,404 mm) to 173.4 in (4,405 mm)

First generation Audi Quattro (1980–1991) wrap film must match the version of the car. The 1985 restyling changed bumpers and lights, so film cut for one version does not fit the other. A coupe built before 1985 and one built after need different patterns.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Quattro

A partial wrap on an Audi Quattro can cover the roof, hood, or mirror caps. Quattro chrome delete is another option and covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Audi Quattro: body, cut-outs and film

The Audi Quattro vinyl wrap is a single-body job, as the first generation came only as a two-door coupe. The body is 173.4 in (4,404 mm) to 173.4 in (4,405 mm) long. The two long side doors each take one large piece of film.

Quattro wrap ideas start with the two long side doors, which are each wrapped as one large piece of film. The compact coupe shape means fewer complex curves than a modern sedan. The bumpers and lights changed in 1985, so film cut for one version does not fit the other.

How much vinyl to wrap a Quattro depends on the year, because a restyling in 1985 changed the bumpers and lights. A 1980–1985 car and a 1985–1991 car need different film cuts. The coupe body is the only style, so the overall film amount stays about 48 ft (14.5 m).

Questions about wrapping an Audi Quattro

How much vinyl does it take to wrap an Audi Quattro?

About 48 ft (14.5 m) of 60-inch (1.52 m) cast film is needed for a full color change wrap on an Audi Quattro. Chrome or patterned film raises the amount to about 59 ft (18 m). The estimate is for the coupe body of the first generation.

Which years of the Quattro take the same film cuts?

1980–1985 and 1985–1991 Audi Quattro cars take different film cuts. The restyling in 1985 changed the bumpers and lights, so patterns from one period do not fit the other.

Can I wrap only the hood or the roof of a Quattro?

Yes, you can wrap only the hood or the roof of a Quattro. Partial wrap options also include mirror caps and chrome delete on window trim and badges. Paint protection film (PPF) can be applied to the front end only.

Is a Quattro hard to wrap?

A Quattro adds work because the two long side doors are each one large piece of film. The coupe is 173.4 in (4,404 mm) to 173.4 in (4,405 mm) long, so large panels need careful handling. The 1985 bumper and light changes also mean different cuts for different years.