Wraps by car

Audi RS 2 wrap

The Audi RS 2 wrap page covers the 1993–1995 first generation wagon. A full vinyl wrap of this mid-size wagon uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same car needs about 69 ft (21 m) of material.

1generations16.5 mof film for a full wrap

Audi RS 2, first generation, factory photo
Audi RS 2, first generation. Factory color shown.

Audi RS 2 wrap colors and ideas

  • Audi RS 2 black wrap
  • Audi RS 2 white wrap
  • Audi RS 2 gray wrap
  • Audi RS 2 silver wrap
  • Audi RS 2 red wrap
  • Audi RS 2 blue wrap
  • Audi RS 2 green wrap
  • Audi RS 2 yellow wrap
  • Audi RS 2 orange wrap
  • Audi RS 2 purple wrap
  • Audi RS 2 pink wrap
  • Audi RS 2 teal wrap
  • Audi RS 2 brown wrap
  • Audi RS 2 gold wrap
  • Audi RS 2 chrome wrap
  • Audi RS 2 color shift wrap
  • Audi RS 2 carbon fiber wrap
  • Audi RS 2 camo and patterned wrap

How much vinyl to wrap an Audi RS 2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–1995wagon (5 doors)180.3 in (4,580 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Audi RS 2 wrap cost factors

An Audi RS 2 wrap cost depends on the amount of film and the work on the 180.3 in (4,580 mm) body. A full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned wrap uses about 69 ft (21 m), which raises material cost.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Audi RS 2 wraps by generation

Swipe sideways. Tap a card for the full description.

Audi RS 2, first generation, factory photo
Factory color shown

1993–1995 Audi RS 2 wagon (first generation)

1993–1995wagon (5 doors)180.3 in (4,580 mm)

The first generation Audi RS 2, built in 1993–1995, often has original or repainted panels. A test spot comes before a full wrap to check how the film sticks to the paint. This step matters on a car of these years because old paint can react to wrap adhesive.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Audi RS 2

A partial wrap on an Audi RS 2 can cover the roof, hood, or mirror caps. An Audi RS 2 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end protects the nose of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Audi RS 2: body, cut-outs and film

An Audi RS 2 vinyl wrap must follow the shape of the five-door wagon body. The car is 180.3 in (4,580 mm) long, which is a mid-size footprint for a full color change wrap. Its single body style helps a shop plan panel coverage with few surprises.

Audi RS 2 wrap ideas begin with the large tailgate that includes the rear glass. The film ends at the edge of the glass, so the installer trims the film around it cleanly. The tailgate is the main area that calls for a cut-out on this car.

How much vinyl to wrap an Audi RS 2 depends on the model year and paint condition. The car was built only from 1993 to 1995, so a shop measures each panel before ordering film. A car with original paint may need less film than one with rust repairs or replaced panels.

Questions about wrapping an Audi RS 2

How much vinyl does it take to wrap an Audi RS 2?

A full wrap of an Audi RS 2 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same car needs about 69 ft (21 m) of material.

Can I wrap only the hood or the roof of an Audi RS 2?

Yes, you can wrap only the hood or the roof of an Audi RS 2. The partial wrap jobs for this car include the roof, hood, and mirror caps. A shop can cut film to any single panel on the 180.3 in (4,580 mm) body.

Is an Audi RS 2 hard to wrap?

An Audi RS 2 is not especially hard to wrap, but the tailgate adds work. The rear glass sits in the tailgate, so the film ends at the edge of the glass. The 180.3 in (4,580 mm) length means a full wrap needs careful planning with about 54 ft (16.5 m) of film.

How many generations of the Audi RS 2 does this page cover?

This page covers one generation of the Audi RS 2, built from 1993 to 1995. The first generation is the only generation of this model.