Wraps by car

Audi RS6 wrap

The Audi RS6 wrap page covers all four generations of this full-size performance model. A vinyl wrap of the newest fourth generation wagon takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 66 ft (20 m).

4generations15 mof film for a full wrap

Audi RS6, fourth generation, factory photo
Audi RS6, fourth generation. Factory color shown.

Audi RS6 wrap colors and ideas

  • Audi RS6 black wrap
  • Audi RS6 white wrap
  • Audi RS6 gray wrap
  • Audi RS6 silver wrap
  • Audi RS6 red wrap
  • Audi RS6 blue wrap
  • Audi RS6 green wrap
  • Audi RS6 yellow wrap
  • Audi RS6 orange wrap
  • Audi RS6 purple wrap
  • Audi RS6 pink wrap
  • Audi RS6 teal wrap
  • Audi RS6 brown wrap
  • Audi RS6 gold wrap
  • Audi RS6 chrome wrap
  • Audi RS6 color shift wrap
  • Audi RS6 carbon fiber wrap
  • Audi RS6 camo and patterned wrap

How much vinyl to wrap an Audi RS6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowwagon (5 doors)196.7 in (4,995 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2012–2018wagon (5 doors)196.0 in (4,979 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
2007–2012sedan, wagon (4 or 5 doors)194.0 in (4,928 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2002–2006sedan, wagon (4 or 5 doors)191.0 in (4,852 mm) to 191.3 in (4,858 mm)about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Audi RS6 wrap cost factors

Audi RS6 wrap cost depends on the size of the car, the amount of film, and the number of parts that need removal or cut-outs. The fourth generation takes about 49 ft (15 m) of cast film, while earlier generations need up to 61 ft (18.5 m). Chrome or patterned film adds roughly 30 percent more material, and a styling kit or sensors add labor. A partial wrap or chrome delete costs less than a full color change because it uses less film.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

Audi RS6 wraps by generation

Swipe sideways. Tap a card for the full description.

Audi RS6, fourth generation, factory photo
Factory color shown

2019–now Audi RS6 wagon (fourth generation)

2019–nowwagon (5 doors)196.7 in (4,995 mm)

The fourth generation Audi RS6 has a panoramic glass roof on every trim. The glass is not wrapped, so the roof stays dark whatever the color of the film. Roof rails still need to be removed or cut around, and the styling kit adds more separate pieces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Audi RS6, third generation, factory photo
Factory color shown

2012–2018 Audi RS6 wagon (third generation)

2012–2018wagon (5 doors)196.0 in (4,979 mm)

The third generation Audi RS6 was restyled in 2014, and that changed the front and rear bumpers and lights. Film cut for a 2012–2014 car does not fit a 2015–2018 car on those panels. The rest of the body stayed largely the same, but installers should check the lower moldings.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Audi RS6, second generation, factory photo
Factory color shown

2007–2012 Audi RS6 sedan, wagon (second generation)

2007–2012sedan, wagon (4 or 5 doors)194.0 in (4,928 mm)

The second generation Audi RS6 is the first to offer both sedan and wagon body styles. The sedan and wagon have different panel plans, and the wagon needs slightly more film on the rear pillars and tailgate. Every trim of this generation has fog lamps in the front bumper that require cut-outs.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Audi RS6, first generation, factory photo
Factory color shown

2002–2006 Audi RS6 sedan, wagon (first generation)

2002–2006sedan, wagon (4 or 5 doors)191.0 in (4,852 mm) to 191.3 in (4,858 mm)

The first generation Audi RS6 was built from 2002 to 2006, so paint age matters before a wrap. Panels may be original, repainted, or replaced, and film does not stick well to failing paint. A test spot on each panel is recommended before a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Audi RS6

An Audi RS6 chrome delete covers the window trim and badges with black film. A partial wrap can do the hood, mirror caps, and tailgate. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi RS6: body, cut-outs and film

An Audi RS6 vinyl wrap is a full-size job because the car is a long wagon in every generation. The fourth generation measures 196.7 in (4,995 mm), and the third is almost the same at 196.0 in (4,979 mm). The second generation is 194.0 in (4,928 mm) and offered both sedan and wagon bodies. The first generation sedan starts at 191.0 in (4,852 mm), so the wagon needs slightly more film.

Audi RS6 wrap ideas must account for the details that add cut-outs and removal time. The tailgate carries the rear glass, so the film ends at the edge of the glass. Every trim has roof rails that either come off before wrapping the roof or are cut around. All trims also have parking sensors in the bumpers, and the fourth generation adds cameras in the body and a styling kit on the bumpers and sills. The fourth generation has a panoramic glass roof that stays unwrapped.

How much vinyl to wrap an Audi RS6 depends on the generation and the body style. The first generation sedan needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the wagon needs about 59 ft (18 m). The second and third generations both need about 61 ft (18.5 m), and the third generation wagon also needs about 70 ft (21.5 m) for chrome or patterned film. The current fourth generation is the most efficient at about 49 ft (15 m) for a standard color.

Questions about wrapping an Audi RS6

How much vinyl does it take to wrap an Audi RS6?

About 49 ft (15 m) of 60-inch (1.52 m) cast film is needed to wrap the newest Audi RS6 wagon. That covers a full color change wrap without chrome or patterned film.

Can the roof of an Audi RS6 be wrapped?

The roof of an Audi RS6 can be wrapped, but the panoramic glass roof on the fourth generation cannot. The glass panels stay dark as they are, and the film ends at the roof rails.

Can I wrap only the hood or the roof of an Audi RS6?

Yes, you can wrap only the hood or the roof of an Audi RS6 as a partial wrap. A partial wrap can also cover the mirror caps and tailgate.

Is an Audi RS6 hard to wrap?

An Audi RS6 is moderately hard to wrap because it is a long full-size car with many cut-outs. The tailgate glass, roof rails, parking sensors, and the styling kit on the fourth generation all add labor.