Wraps by car

Audi RS7 wrap

This page covers the Audi RS7 wrap in two generations from 2013 to today. The Audi RS7 is a full-size liftback with five doors in both versions. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Your vinyl wrap estimate changes if you choose chrome or patterned film.

2generations15.5 mof film for a full wrap

Audi RS7, second generation, factory photo
Audi RS7, second generation. Factory color shown.

Audi RS7 wrap colors and ideas

  • Audi RS7 black wrap
  • Audi RS7 white wrap
  • Audi RS7 gray wrap
  • Audi RS7 silver wrap
  • Audi RS7 red wrap
  • Audi RS7 blue wrap
  • Audi RS7 green wrap
  • Audi RS7 yellow wrap
  • Audi RS7 orange wrap
  • Audi RS7 purple wrap
  • Audi RS7 pink wrap
  • Audi RS7 teal wrap
  • Audi RS7 brown wrap
  • Audi RS7 gold wrap
  • Audi RS7 chrome wrap
  • Audi RS7 color shift wrap
  • Audi RS7 carbon fiber wrap
  • Audi RS7 camo and patterned wrap

How much vinyl to wrap an Audi RS7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowliftback (5 doors)197.2 in (5,009 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
2013–2018liftback (5 doors)197.3 in (5,012 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Audi RS7 wrap cost factors

Audi RS7 wrap cost depends on the generation, the film type, and how much of the body is covered. The second generation uses about 51 ft (15.5 m) of cast film, and the first generation uses about 59 ft (18 m). Chrome or patterned film adds several feet to the estimate on both bodies. A partial wrap or a clear paint protection film job costs less than a full color change because less material and labor go into it.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

Audi RS7 wraps by generation

Swipe sideways. Tap a card for the full description.

Audi RS7, second generation, factory photo
Factory color shown

2019–now Audi RS7 liftback (second generation)

2019–nowliftback (5 doors)197.2 in (5,009 mm)

The second generation Audi RS7 from 2019 has a panoramic glass roof on every trim. The roof is not wrapped, so the roof stays dark whatever the color of the film. That means the installer runs the film up to the roof rails and stops there. The dark glass remains a fixed part of the car's look.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Audi RS7, first generation, factory photo
Factory color shown

2013–2018 Audi RS7 liftback (first generation)

2013–2018liftback (5 doors)197.3 in (5,012 mm)

The first generation Audi RS7 from 2013 was restyled in 2014. The bumpers and lights changed in that restyle, so film cut for one version does not fit the other. An installer checks the production date before cutting the kit for this body. That check prevents wasted film and rework on the front and rear ends.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Audi RS7

An Audi RS7 partial wrap covers the hood, mirror caps, or tailgate instead of the whole body. An Audi RS7 chrome delete wraps the window trim and badges in black film to cover the bright parts. Paint protection film (PPF) is another option: clear film on the front end to guard against stone chips. These jobs use less film than a full wrap and change the look in a smaller way.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi RS7: body, cut-outs and film

The Audi RS7 vinyl wrap follows the size of a full-size liftback just under 200 inches long. Both generations measure 197.2 in (5,009 mm) or 197.3 in (5,012 mm), so the film need is similar between old and new. The five-door body means the tailgate and rear glass sit in one large moving panel. Installers plan the film around that tailgate from the start.

Audi RS7 wrap ideas must account for the tailgate glass, where the film ends at the edge of the glass. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Some trims of the second generation carry a styling kit on the bumpers and sills, which adds separate pieces to wrap. The first generation has bright decorative moldings that stay bright unless a chrome delete covers them.

How much vinyl to wrap an Audi RS7 shifts between the first and second generation. The second generation from 2019 needs about 51 ft (15.5 m) of 60-inch film, while the first generation from 2013 takes about 59 ft (18 m). The small difference comes from changes in the bumpers and the lower body. Anyone counting film for an Audi RS7 should use the figure for the exact generation.

Questions about wrapping an Audi RS7

How much vinyl does it take to wrap an Audi RS7?

An Audi RS7 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap of the second generation. The first generation from 2013 to 2018 needs more film, about 59 ft (18 m). Chrome or patterned film adds roughly ten to twenty percent to those figures. The exact amount depends on the body version and how many separate pieces the installer cuts.

Can the roof of an Audi RS7 be wrapped?

The roof of an Audi RS7 can be wrapped on the first generation, but not on the second. The second generation has a panoramic glass roof on every trim, and glass is not wrapped. The first generation has a metal roof that accepts vinyl film like the rest of the body. On any RS7 the roof wrap ends at the roof rails.

Can I wrap only the hood or the roof of an Audi RS7?

You can wrap only the hood or the roof of an Audi RS7 as a partial job. A partial wrap on this car typically covers the hood, mirror caps, or the tailgate. On the first generation the roof is a metal panel and can be wrapped alone. On the second generation the roof is glass, so the hood is the usual standalone panel.

Is an Audi RS7 hard to wrap?

An Audi RS7 is a big car and takes more work than a smaller one, but it is not unusually hard to wrap. The tailgate with the rear glass in it means the film must end exactly at the edge of the glass. Every trim has parking sensors in the bumpers, and the film is cut around each sensor. The second generation adds a styling kit on some trims, which gives the installer more small pieces to cover.