Wraps by car

Audi S1 wrap

The Audi S1 is a subcompact hot hatch produced from 2014 to 2018. This page covers its single generation and the vinyl wrap film it needs. A full wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

Audi S1, first generation, factory photo
Audi S1, first generation. Factory color shown.

Audi S1 wrap colors and ideas

  • Audi S1 black wrap
  • Audi S1 white wrap
  • Audi S1 gray wrap
  • Audi S1 silver wrap
  • Audi S1 red wrap
  • Audi S1 blue wrap
  • Audi S1 green wrap
  • Audi S1 yellow wrap
  • Audi S1 orange wrap
  • Audi S1 purple wrap
  • Audi S1 pink wrap
  • Audi S1 teal wrap
  • Audi S1 brown wrap
  • Audi S1 gold wrap
  • Audi S1 chrome wrap
  • Audi S1 color shift wrap
  • Audi S1 carbon fiber wrap
  • Audi S1 camo and patterned wrap

How much vinyl to wrap an Audi S1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2018hatchback (3 or 5 doors)156.5 in (3,975 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Audi S1 wrap cost factors

The Audi S1 wrap cost depends on the size of the car and the amount of film. The body is 156.5 in (3,975 mm) long, so it needs about 46 ft (14 m) of standard cast film. The cost also changes with the film type, such as chrome or patterned film, which needs about 57 ft (17.5 m).

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Audi S1 wraps by generation

Swipe sideways. Tap a card for the full description.

Audi S1, first generation, factory photo
Factory color shown

2014–2018 Audi S1 hatchback (first generation)

2014–2018hatchback (3 or 5 doors)156.5 in (3,975 mm)

The first generation Audi S1 is a subcompact hatchback made from 2014 to 2018. It is 156.5 in (3,975 mm) long, which is on the smaller side for a wrap. The hatchback body style means the tailgate is one large piece, so the wrap uses fewer panels than a sedan.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Audi S1

The Audi S1 chrome delete covers the window trim and badges with black film. A partial wrap can be the roof, hood, or mirror caps, which uses less film than a full wrap. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Audi S1: body, cut-outs and film

An Audi S1 vinyl wrap covers a hatchback body with three or five doors. The car measures 156.5 in (3,975 mm) long, so there are no long roof or side sections to handle. The hatchback shape means the tailgate is a large single panel that needs careful film alignment.

The Audi S1 wrap starts with the tailgate, which has the rear glass in it. The film ends at the edge of the glass, so there is no need to tuck film behind a separate glass panel. Door handles, mirrors, and the front grille are removed for a clean installation.

When counting how much vinyl to wrap an Audi S1, only one generation exists. The single body style is a hatchback with three or five doors, and the length is the same for all years. The film estimate does not change between trims of this generation.

Questions about wrapping an Audi S1

How much vinyl does it take to wrap an Audi S1?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap an Audi S1. That figure is for a full wrap of the newest body. If you use chrome or patterned film, plan for about 57 ft (17.5 m).

Can I wrap only the hood or the roof of an Audi S1?

Yes, you can wrap only the hood or the roof of an Audi S1. Partial wraps for this car often include the roof, hood, or mirror caps. These smaller jobs use less film than a full wrap.

Is an Audi S1 hard to wrap?

Wrapping an Audi S1 has one specific challenge: the tailgate has the rear glass in it. The film must end at the edge of the glass, so the installer has to trim precisely around that area. The car's small size makes it easier to handle than a larger vehicle.

How many generations of the Audi S1 does this page cover?

This page covers one generation of the Audi S1. The first generation was produced from 2014 to 2018. There are no other generations in the catalog.