Wraps by car

Audi S2 wrap

The Audi S2 wrap page covers this 1990–1995 mid-size model and the vinyl wrap needed for its one generation. The S2 came as a hatchback, sedan, and wagon with three, four, or five doors. A full wrap of the newest body takes about 51 ft (15.5 m) for the sedan and 54 ft (16.5 m) for the wagon using 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Audi S2, first generation, factory photo
Audi S2, first generation. Factory color shown.

Audi S2 wrap colors and ideas

  • Audi S2 black wrap
  • Audi S2 white wrap
  • Audi S2 gray wrap
  • Audi S2 silver wrap
  • Audi S2 red wrap
  • Audi S2 blue wrap
  • Audi S2 green wrap
  • Audi S2 yellow wrap
  • Audi S2 orange wrap
  • Audi S2 purple wrap
  • Audi S2 pink wrap
  • Audi S2 teal wrap
  • Audi S2 brown wrap
  • Audi S2 gold wrap
  • Audi S2 chrome wrap
  • Audi S2 color shift wrap
  • Audi S2 carbon fiber wrap
  • Audi S2 camo and patterned wrap

How much vinyl to wrap an Audi S2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1995hatchback, sedan, wagon (3 or 4 or 5 doors)173.2 in (4,400 mm) to 177.5 in (4,509 mm)about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Audi S2 wrap cost factors

The Audi S2 wrap cost depends on the body style, the film choice, and the condition of the paint. A wagon needs more film than a sedan, about 54 ft (16.5 m) versus 51 ft (15.5 m) in 60-inch (1.52 m) cast film. Chrome or patterned film can require up to 69 ft (21 m) due to matching and waste. The installer's labor for removing trim and wrapping the tailgate with the rear glass also affects the cost.

  • Film for a full wrap: about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: hatchback, sedan, wagon (3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Audi S2 wraps by generation

Swipe sideways. Tap a card for the full description.

Audi S2, first generation, factory photo
Factory color shown

1990–1995 Audi S2 hatchback, sedan, wagon (first generation)

1990–1995hatchback, sedan, wagon (3 or 4 or 5 doors)173.2 in (4,400 mm) to 177.5 in (4,509 mm)

The first generation Audi S2 was built from 1990 to 1995 as a hatchback, sedan, and wagon. The body style decides the panel plan and the film amount because the wagon is longer at 177.5 in (4,509 mm) than the sedan at 173.2 in (4,400 mm). The hatchback has a similar front to the sedan but a shorter rear, placing its film need between the two. All styles share the B4 platform and the tailgate with the rear glass in it on the wagon.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Audi S2

The Audi S2 chrome delete covers the window trim and badges with black film to change the brightwork appearance. A partial wrap can include the roof, hood, and mirror caps for a smaller color change. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These options let you update the look without a full vinyl wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Audi S2: body, cut-outs and film

The Audi S2 vinyl wrap changes with the body style because the hatchback, sedan, and wagon share the B4 platform but differ in length and rear design. The sedan measures 173.2 in (4,400 mm) and the wagon reaches 177.5 in (4,509 mm), so the wagon needs slightly more film. The hatchback and sedan have a trunk lid, while the wagon has a tailgate with the rear glass in it. That tailgate changes how the film ends at the edge of the glass.

Audi S2 wrap ideas must account for the tailgate with the rear glass in it, where the film ends at the edge of the glass. The door handles, mirrors, and badges may require cut-outs or removal for a clean install. The roof rails on the wagon, if present, add extra work around the mounting points. The front and rear bumpers have contours that need careful stretching and relief cuts.

How much vinyl to wrap an Audi S2 depends on the body style, since the wagon is longer than the sedan. The film estimate is about 51 ft (15.5 m) for the sedan and 54 ft (16.5 m) for the wagon. The hatchback falls between these figures because it shares the sedan's front end but has a shorter rear overhang. Using chrome or patterned film can raise the amount to about 69 ft (21 m).

Questions about wrapping an Audi S2

How much vinyl does it take to wrap an Audi S2?

An Audi S2 takes about 51 ft (15.5 m) for the sedan and 54 ft (16.5 m) for the wagon using 60-inch (1.52 m) cast film. The hatchback falls between these amounts because its rear is shorter than the wagon. Chrome or patterned film can increase the total to about 69 ft (21 m).

Which Audi S2 body takes more film?

The Audi S2 wagon takes more film than the sedan and hatchback because it is longer and has a larger rear area. The wagon needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the sedan needs about 51 ft (15.5 m). The hatchback uses a similar amount to the sedan due to its shorter rear overhang.

Can I wrap only the hood or the roof of an Audi S2?

Yes, you can wrap only the hood or the roof of an Audi S2 as a partial wrap. A partial wrap can also include the mirror caps. This is a smaller job than a full color change wrap and uses less film.

Is an Audi S2 hard to wrap?

An Audi S2 is moderately hard to wrap because of its tailgate with the rear glass in it on the wagon, where the film ends at the edge of the glass. The body length of up to 177.5 in (4,509 mm) means large panels that need careful handling. The bumpers and door handles require cut-outs or removal for a clean finish.