Wraps by car

Audi TT RS wrap

The Audi TT RS wrap page covers the third and second generations of this sports car. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film can need up to about 57 ft (17.5 m).

2generations14 mof film for a full wrap

Audi TT RS, third generation, factory photo
Audi TT RS, third generation. Factory color shown.

Audi TT RS wrap colors and ideas

  • TT RS black wrap
  • TT RS white wrap
  • TT RS gray wrap
  • TT RS silver wrap
  • TT RS red wrap
  • TT RS blue wrap
  • TT RS green wrap
  • TT RS yellow wrap
  • TT RS orange wrap
  • TT RS purple wrap
  • TT RS pink wrap
  • TT RS teal wrap
  • TT RS brown wrap
  • TT RS gold wrap
  • TT RS chrome wrap
  • TT RS color shift wrap
  • TT RS carbon fiber wrap
  • TT RS camo and patterned wrap

How much vinyl to wrap an Audi TT RS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowconvertible, coupe (2 doors)165.0 in (4,191 mm) to 165.4 in (4,201 mm)about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
2009–2014convertible, coupe (2 doors)165.3 in (4,198 mm)about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

TT RS wrap cost factors

TT RS wrap cost depends on the size and shape of the body panels, the number of pieces, and the film choice. The coupe and convertible of this car use about 44 ft (13.5 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film adds waste and can push the roll up to about 57 ft (17.5 m). Cut-outs for parking sensors and a possible styling kit also add labor time.

  • Film for a full wrap: about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

TT RS wraps by generation

Swipe sideways. Tap a card for the full description.

Audi TT RS, third generation, factory photo
Factory color shown

2016–now TT RS convertible, coupe (third generation)

2016–nowconvertible, coupe (2 doors)165.0 in (4,191 mm) to 165.4 in (4,201 mm)

The open top of the third generation Audi TT RS is not wrapped when the car has a fabric roof. The film ends where the fabric begins, with no wrap on the soft top itself. A folding hard top is wrapped as panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Audi TT RS, second generation, factory photo
Factory color shown

2009–2014 TT RS convertible, coupe (second generation)

2009–2014convertible, coupe (2 doors)165.3 in (4,198 mm)

Paint age on a second generation Audi TT RS can vary from panel to panel. Some panels may be original while others have been repainted, and a wrap installer tests a small spot before a full wrap. This check shows whether the film will bond well to the older paint.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a TT RS

A partial wrap on an Audi TT RS covers the roof, hood, or mirror caps in one piece each. A TT RS chrome delete covers the window trim and badges with black film while the rest of the body keeps its paint. Paint protection film (PPF) is a clear film applied to the front end to guard the nose, hood, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi TT RS: body, cut-outs and film

An Audi TT RS vinyl wrap follows the short two-door body of this car. The 165.0 in (4,191 mm) to 165.4 in (4,201 mm) length means the front and rear bumpers are compact but wrap in several pieces. The coupe and convertible share the same basic shape, so film use is close between the two styles.

TT RS wrap ideas start with the two long side doors, each of which is one large piece of film. Parking sensors in the bumpers on every trim need the film cut around each sensor. Some trims carry a styling kit on the bumpers and sills, which adds more separate pieces to wrap.

How much vinyl to wrap a TT RS depends on the generation and body style. The third generation from 2016 and the second generation from 2009 to 2014 list the same film estimate of about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe. A restyling of the third generation in 2019 does not change those film needs.

Questions about wrapping an Audi TT RS

How much vinyl does it take to wrap an Audi TT RS?

An Audi TT RS needs about 44 ft (13.5 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. The lower figure fits the convertible and the higher figure fits the coupe. Chrome or patterned film can take up to about 57 ft (17.5 m).

Is the top of a TT RS wrapped?

No, the fabric top of a TT RS convertible is not wrapped. The film ends where the fabric begins, and the soft top stays uncovered. A folding hard top is wrapped as panels of its own.

Which years of the TT RS take the same film cuts?

The third generation TT RS from 2016 onward takes the same film cuts after its 2019 restyling. The second generation from 2009 to 2014 takes its own set of cuts. The two generations do not share film patterns.

Which TT RS body takes more film?

The coupe of the Audi TT RS takes more film than the convertible. A full wrap of the coupe needs about 46 ft (14 m) of 60-inch (1.52 m) cast film, while the convertible needs about 44 ft (13.5 m). The fixed roof of the coupe accounts for the extra material.