Wraps by car

Audi TTS wrap

The Audi TTS wrap guide covers two generations of this sports car and the vinyl wrap film a full body needs. A full wrap of the newest TTS body takes about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe. The guide explains how the body styles, trim parts, and generation changes affect the wrap job.

2generations14 mof film for a full wrap

Audi TTS, third generation, factory photo
Audi TTS, third generation. Factory color shown.

Audi TTS wrap colors and ideas

  • Audi TTS black wrap
  • Audi TTS white wrap
  • Audi TTS gray wrap
  • Audi TTS silver wrap
  • Audi TTS red wrap
  • Audi TTS blue wrap
  • Audi TTS green wrap
  • Audi TTS yellow wrap
  • Audi TTS orange wrap
  • Audi TTS purple wrap
  • Audi TTS pink wrap
  • Audi TTS teal wrap
  • Audi TTS brown wrap
  • Audi TTS gold wrap
  • Audi TTS chrome wrap
  • Audi TTS color shift wrap
  • Audi TTS carbon fiber wrap
  • Audi TTS camo and patterned wrap

How much vinyl to wrap an Audi TTS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowconvertible, coupe (2 doors)164.4 in (4,177 mm) to 165.3 in (4,199 mm)about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
2008–2014convertible, coupe (2 doors)164.5 in (4,178 mm) to 165.3 in (4,198 mm)about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Audi TTS wrap cost factors

Audi TTS wrap cost depends on the amount of film, the body style, and the labor for the trim parts. A coupe needs about 46 ft (14 m) of 60-inch (1.52 m) film, and a convertible about 44 ft (13.5 m). Chrome or patterned film can raise the material amount to about 57 ft (17.5 m). Cut-outs for sensors or fog lamps and a chrome delete add time to the install.

  • Film for a full wrap: about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

Audi TTS wraps by generation

Swipe sideways. Tap a card for the full description.

Audi TTS, third generation, factory photo
Factory color shown

2014–now Audi TTS convertible, coupe (third generation)

2014–nowconvertible, coupe (2 doors)164.4 in (4,177 mm) to 165.3 in (4,199 mm)

On the third generation Audi TTS, the open top is a fabric panel that is not wrapped, and the vinyl ends where the top begins. A folding hard top is wrapped as panels of its own, so each moving section gets its own film piece. The film estimate for the convertible is about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. The coupe takes about 46 ft (14 m) because the roof is a fixed panel.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Film: about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Audi TTS, second generation, factory photo
Factory color shown

2008–2014 Audi TTS convertible, coupe (second generation)

2008–2014convertible, coupe (2 doors)164.5 in (4,178 mm) to 165.3 in (4,198 mm)

On a second generation Audi TTS, paint age matters before a full wrap because panels may be original or repainted. A test spot of film is applied first to check adhesion on the old paint. These cars are from 2008 to 2014, so the paint has had time to fade or lift. The wrap film needs a stable surface to bond well, and a repainted panel can react differently.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Audi TTS

A partial wrap on an Audi TTS can cover the roof, hood, or mirror caps instead of the whole body. An Audi TTS chrome delete covers the window trim and badges with black film, and the second generation has bright moldings that can be included. Paint protection film (PPF) as a clear film on the front end keeps the original color visible. These smaller jobs use less film and can be done without wrapping the doors or rear quarters.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi TTS: body, cut-outs and film

An Audi TTS vinyl wrap has to follow the shape of a two-door sports car with a long nose and a short rear deck. The convertible and coupe styles are both counted at 44 ft (13.5 m) and 46 ft (14 m) of 60-inch (1.52 m) cast film. Each long side door is covered with one large piece of film. The fabric top of a convertible is not wrapped, so the film ends where the top begins.

Audi TTS wrap ideas begin with the parts that need cut-outs or come off for a clean install. On the third generation some trims have parking sensors in the bumpers, and the film is cut around each sensor. On the second generation every trim has fog lamps that need cut-outs in the bumper film. Bright moldings on the second generation stay bright next to the film unless a chrome delete covers them.

How much vinyl to wrap an Audi TTS depends on the body style, and the two generations use the same amounts. Both the second and third generation are listed at about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe. A chrome or patterned film can take up to about 57 ft (17.5 m) because the pattern repeat adds waste. The lengths of the two generations differ by only about an inch, so the panel sizes are very close.

Questions about wrapping an Audi TTS

How much vinyl does it take to wrap an Audi TTS?

A full wrap of the newest Audi TTS takes about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe. The estimate is for 60-inch (1.52 m) cast film on the third generation body. Chrome or patterned film can need up to about 57 ft (17.5 m) because of pattern matching. The amount is the same for the second generation because the body dimensions are almost identical.

Is the top of an Audi TTS wrapped?

The top of an Audi TTS is not wrapped when it is a fabric convertible top. The film ends where the fabric begins, and the top stays its original color. A folding hard top is wrapped as separate panels of its own. On the coupe the fixed roof is wrapped as part of the full body.

Which years of the Audi TTS take the same film cuts?

The Audi TTS model years that take the same film cuts are 2014 to now for the third generation and 2008 to 2014 for the second generation. Within the third generation, the 2018 restyle did not change the body cut lines in the catalog. The film estimates for both generations are also the same at 44 ft (13.5 m) to 46 ft (14 m). The cut differences are between generations, not inside them.

Which Audi TTS body takes more film?

The Audi TTS coupe takes more film than the convertible by about 2 ft (0.6 m). The coupe is listed at about 46 ft (14 m) and the convertible at about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. The difference is the fixed roof panel on the coupe, which is not present on the convertible. A chrome or patterned film raises both amounts to about 57 ft (17.5 m), but the coupe still takes the larger figure.