Wraps by car

Audi Typ R wrap

The Audi Typ R wrap page covers the 1927–1929 first generation, the only generation in the catalog, in convertible and wagon body styles. A full wrap of this car uses about 64 ft (19.5 m) of vinyl for the convertible up to 69 ft (21 m) for the wagon, with 60-inch (1.52 m) cast film. Chrome or patterned film can raise the total to up to about 89 ft (27 m).

1generations19.5 mof film for a full wrap

Audi Typ R, first generation, factory photo
Audi Typ R, first generation. Factory color shown.

Audi Typ R wrap colors and ideas

  • Typ R black wrap
  • Typ R white wrap
  • Typ R gray wrap
  • Typ R silver wrap
  • Typ R red wrap
  • Typ R blue wrap
  • Typ R green wrap
  • Typ R yellow wrap
  • Typ R orange wrap
  • Typ R purple wrap
  • Typ R pink wrap
  • Typ R teal wrap
  • Typ R brown wrap
  • Typ R gold wrap
  • Typ R chrome wrap
  • Typ R color shift wrap
  • Typ R carbon fiber wrap
  • Typ R camo and patterned wrap

How much vinyl to wrap an Audi Typ R

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1927–1929convertible, wagon (4 or 5 doors)204.7 in (5,200 mm)about 64 ft (19.5 m) for the convertible to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 89 ft (27 m)

Typ R wrap cost factors

Typ R wrap cost depends on the body style, the film you choose and the labor for the tall body of 74.8 in (1,900 mm). The wagon with 4 or 5 doors takes more film and more time than the convertible. Adding chrome or patterned film pushes the total film up to about 89 ft (27 m). The installer also has to work from a platform for the roof.

  • Film for a full wrap: about 64 ft (19.5 m) for the convertible to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 89 ft (27 m).
  • Body: convertible, wagon (4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (74.8 in (1,900 mm)): the roof is wrapped from a platform.

Typ R wraps by generation

Swipe sideways. Tap a card for the full description.

Audi Typ R, first generation, factory photo
Factory color shown

1927–1929 Typ R convertible, wagon (first generation)

1927–1929convertible, wagon (4 or 5 doors)204.7 in (5,200 mm)

The first generation Audi Typ R has an open top, and in a wrap the fabric top of the convertible is not covered. The film ends where the top begins, so the edges are finished there. A folding hard top would be wrapped as separate panels of its own. On this body the open top is left as it is.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.8 in (1,900 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) for the convertible to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 89 ft (27 m).

Roof, hood, chrome delete and PPF on a Typ R

A partial wrap on the Audi Typ R can cover the roof, the hood or the mirror caps. Typ R chrome delete is done on the window trim and the badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Audi Typ R: body, cut-outs and film

An Audi Typ R vinyl wrap has to follow the tall body of 74.8 in (1,900 mm) and its two main body styles. The convertible and the wagon are both long at 204.7 in (5,200 mm), so the installer plans the wrap in sections around the roof, the doors and the tailgate. The wagon with 4 or 5 doors has more flat side area, while the convertible has a shorter roof and less film on the rear.

Typ R wrap ideas start with the parts that cannot be covered by film. A fabric top on the convertible is not wrapped, and the film ends where the top begins. A tailgate with the rear glass in it means the film stops at the edge of the glass. The roof of this tall body is wrapped from a platform.

How much vinyl to wrap a Typ R depends on the body style you have. The first generation was built from 1927 to 1929 as a convertible or a wagon with 4 or 5 doors. The figures here are for that one generation, and there is no later body to compare. The wagon uses more film because of its larger rear area and extra doors.

Questions about wrapping an Audi Typ R

How much vinyl does it take to wrap an Audi Typ R?

How much vinyl does it take to wrap an Audi Typ R? A full wrap takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for the convertible and up to 69 ft (21 m) for the wagon. Chrome or patterned film can raise the total to about 89 ft (27 m).

Is the top of a Typ R wrapped?

Is the top of a Typ R wrapped? No, the fabric top of the convertible is not wrapped, and the film ends where the top begins. A folding hard top would be wrapped as its own panels. On this car the open top stays uncovered.

Which Typ R body takes more film?

Which Typ R body takes more film? The wagon takes more film than the convertible, about 69 ft (21 m) compared to about 64 ft (19.5 m). The wagon has more rear area and 4 or 5 doors to cover.

Can I wrap only the hood or the roof of a Typ R?

Can I wrap only the hood or the roof of a Typ R? Yes, a partial wrap can cover the roof, the hood or the mirror caps alone. You can also do a chrome delete on the window trim and badges. Paint protection film on the front end is another option.