Wraps by car

Bentley Arnage wrap

A Bentley Arnage wrap covers the sedan with vinyl film on every painted panel. The Arnage was produced in one generation from 1998 to 2009, with a restyling in 2002. A full wrap of the newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film.

1generations20.5 mof film for a full wrap

Bentley Arnage, first generation, factory photo
Bentley Arnage, first generation. Factory color shown.

Bentley Arnage wrap colors and ideas

  • Arnage black wrap
  • Arnage white wrap
  • Arnage gray wrap
  • Arnage silver wrap
  • Arnage red wrap
  • Arnage blue wrap
  • Arnage green wrap
  • Arnage yellow wrap
  • Arnage orange wrap
  • Arnage purple wrap
  • Arnage pink wrap
  • Arnage teal wrap
  • Arnage brown wrap
  • Arnage gold wrap
  • Arnage chrome wrap
  • Arnage color shift wrap
  • Arnage carbon fiber wrap
  • Arnage camo and patterned wrap

How much vinyl to wrap a Bentley Arnage

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2009sedan (4 doors)212.2 in (5,390 mm) to 222.0 in (5,640 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Arnage wrap cost factors

Arnage wrap cost depends on the size of the body and the amount of film. A full wrap uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. The final cost is also affected by the condition of the paint and how many trim parts must be removed. Additional work like chrome delete or paint protection film changes the total.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: sedan (4 doors).
  • Restyled in 2002: bumpers and lights differ between the versions, and so do the film cuts.

Arnage wraps by generation

Swipe sideways. Tap a card for the full description.

Bentley Arnage, first generation, factory photo
Factory color shown

1998–2009 Arnage sedan (first generation)

1998–2009sedan (4 doors)212.2 in (5,390 mm) to 222.0 in (5,640 mm)

The first generation Bentley Arnage was produced from 1998 to 2009 as a four-door sedan. In 2002 the Arnage was restyled with new bumpers and lights. As a result, vinyl film cut for a pre-2002 Arnage does not fit a post-2002 Arnage without changes. The body length ranged from 212.2 in (5,390 mm) to 222.0 in (5,640 mm).

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on an Arnage

A partial wrap on an Arnage covers selected panels such as the roof, hood, or mirror caps. Arnage chrome delete replaces the bright window trim and badges with black film. Paint protection film (PPF) is a clear urethane film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done without covering the entire body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Bentley Arnage: body, cut-outs and film

A Bentley Arnage vinyl wrap must handle a long luxury sedan body from 212.2 in (5,390 mm) to 222.0 in (5,640 mm). The four-door sedan has large flat sides and a long hood, so the installer uses wide film with fewer seams. The rear fenders and C-pillars need careful heating and stretching to avoid wrinkles.

Arnage wrap ideas start with the chrome trim pieces that need removal or masking. The window moldings, door handles, grille surround, and badges are usually removed for clean edges. The bumpers, side mirrors, and door moldings also come off during a full wrap. The installer cuts around the headlights, taillights, parking sensors, and antenna.

To know how much vinyl to wrap an Arnage, check the production years and restyling. The first generation spans 1998 to 2009, but the 2002 restyling changed the bumpers and lights. Film cut for a 1998–2001 Arnage will not fit a 2002–2009 Arnage without trimming. The overall body length stayed between 212.2 in (5,390 mm) and 222.0 in (5,640 mm).

Questions about wrapping a Bentley Arnage

How much vinyl does it take to wrap a Bentley Arnage?

It takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film to wrap a Bentley Arnage. That figure covers the newest body style with no extra for chrome or patterned film. A full wrap includes the roof, hood, trunk, doors, fenders, and bumpers.

Which years of the Arnage take the same film cuts?

The Arnage was built from 1998 to 2009, but the 2002 restyling changed the bumpers and lights. Film cut for a 1998–2001 Arnage will not fit a 2002–2009 Arnage without adjustments. Installers must modify the patterns for the front and rear bumpers.

Can I wrap only the hood or the roof of an Arnage?

Yes, you can wrap only the hood or the roof of an Arnage. A partial wrap covers selected panels such as the roof, hood, or mirror caps. This is a smaller job that uses less film than a full wrap.

Is an Arnage hard to wrap?

An Arnage is a demanding car to wrap because of its size and details. The body ranges from 212.2 in (5,390 mm) to 222.0 in (5,640 mm), which means large film panels and careful alignment. The chrome trim pieces must be removed or masked, and the bumpers and lights differ after the 2002 restyling.