Wraps by car

Bentley S wrap

This Bentley S wrap page covers the full S range across its three generations, from 1955 to 1965. A full vinyl wrap of the newest body takes about 62 ft (19 m) for the convertible up to 67 ft (20.5 m) for the sedan using 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to about 76 ft (23 m).

3generations19 mof film for a full wrap

Bentley S, third generation, factory photo
Bentley S, third generation. Factory color shown.

Bentley S wrap colors and ideas

  • Bentley S black wrap
  • Bentley S white wrap
  • Bentley S gray wrap
  • Bentley S silver wrap
  • Bentley S red wrap
  • Bentley S blue wrap
  • Bentley S green wrap
  • Bentley S yellow wrap
  • Bentley S orange wrap
  • Bentley S purple wrap
  • Bentley S pink wrap
  • Bentley S teal wrap
  • Bentley S brown wrap
  • Bentley S gold wrap
  • Bentley S chrome wrap
  • Bentley S color shift wrap
  • Bentley S carbon fiber wrap
  • Bentley S camo and patterned wrap

How much vinyl to wrap a Bentley S

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1962–1965convertible, coupe, sedan (2 or 4 doors)210.6 in (5,350 mm) to 212.0 in (5,385 mm)about 62 ft (19 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
1959–1962convertible, coupe, sedan (2 or 4 doors)210.6 in (5,350 mm) to 211.7 in (5,378 mm)about 62 ft (19 m) for the coupe to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
1955–1959coupe, sedan (2 or 4 doors)210.6 in (5,350 mm) to 212.0 in (5,385 mm)about 62 ft (19 m) for the coupe to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Bentley S wrap cost factors

Bentley S wrap cost depends on the body style, the film choice, and the condition of the paint. The sedan needs up to 67 ft (20.5 m) of 60-inch (1.52 m) film, while the convertible needs about 62 ft (19 m). Chrome or patterned film can add up to 76 ft (23 m) to the job. Paint correction before wrapping adds labor, and the age of the car may require extra prep.

  • Film for a full wrap: about 62 ft (19 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Bentley S wraps by generation

Swipe sideways. Tap a card for the full description.

Bentley S, third generation, factory photo
Factory color shown

1962–1965 Bentley S convertible, coupe, sedan (third generation)

1962–1965convertible, coupe, sedan (2 or 4 doors)210.6 in (5,350 mm) to 212.0 in (5,385 mm)

The open top of a Bentley S is not wrapped when it is a fabric convertible top. The film ends where the fabric begins, and the installer trims the edge cleanly. A folding hard top is wrapped as panels of its own, so each panel is covered separately.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 62 ft (19 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Bentley S, second generation, factory photo
Factory color shown

1959–1962 Bentley S convertible, coupe, sedan (second generation)

1959–1962convertible, coupe, sedan (2 or 4 doors)210.6 in (5,350 mm) to 211.7 in (5,378 mm)

The body style of the Bentley S decides the panel plan and the film amount. The convertible has a fabric top that is left uncovered, so less film is needed than for the sedan. The coupe and sedan have a solid roof and use about the same film, 62 ft (19 m) for the coupe and 67 ft (20.5 m) for the sedan. A folding hard top is wrapped as its own panels.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 62 ft (19 m) for the coupe to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Bentley S, first generation, factory photo
Factory color shown

1955–1959 Bentley S coupe, sedan (first generation)

1955–1959coupe, sedan (2 or 4 doors)210.6 in (5,350 mm) to 212.0 in (5,385 mm)

On a Bentley S from 1955 to 1959, the paint age matters before a full wrap. Panels may be original or repainted, and a test spot should be done on each panel to check adhesion. The wrap installer will look for rust, filler, or loose paint. A test spot reveals whether the film will pull the paint when removed.

Film: about 62 ft (19 m) for the coupe to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Bentley S

A partial wrap on a Bentley S can cover the roof, hood, or mirror caps. A Bentley S chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Bentley S: body, cut-outs and film

The Bentley S vinyl wrap depends on the body style and its length, which runs from 210.6 in (5,350 mm) to 212.0 in (5,385 mm). The convertible has a fabric top that is not wrapped, so the film ends where the top begins. The coupe and sedan have more painted panels and use more film, with the sedan taking the highest estimate.

Bentley S wrap ideas start with removing or working around the bright trim, badges, and door handles. The convertible's folding hard top is wrapped as panels of its own, while a fabric top is left uncovered. Cut-outs are needed for the grille, headlights, taillights, and any side markers.

How much vinyl to wrap a Bentley S changes between the first, second, and third generations. All bodies have similar lengths, but the third generation adds a coupe and sedan to the convertible, while the first generation has no convertible. The film estimate remains about 62 ft (19 m) for the coupe to 67 ft (20.5 m) for the sedan.

Questions about wrapping a Bentley S

How much vinyl does it take to wrap a Bentley S?

It takes about 62 ft (19 m) to wrap the convertible body and up to 67 ft (20.5 m) for the sedan using 60-inch (1.52 m) cast film. Chrome or patterned film can raise the total to about 76 ft (23 m). The exact amount depends on the body style and how many extra pieces are wrapped.

Is the top of a Bentley S wrapped?

No, a fabric top of a Bentley S is not wrapped. The film ends where the fabric begins, leaving the top uncovered. A folding hard top is wrapped as panels of its own.

Which Bentley S body takes more film?

The sedan body of the Bentley S takes more film than the coupe or convertible. The sedan needs up to 67 ft (20.5 m), while the coupe and convertible need about 62 ft (19 m) of 60-inch (1.52 m) film.

Can I wrap only the hood or the roof of a Bentley S?

Yes, you can wrap only the hood or the roof of a Bentley S. A partial wrap can also include mirror caps. Chrome delete covers window trim and badges, and PPF is clear film for the front end.