Wraps by car

Bentley Turbo R wrap

The Bentley Turbo R wrap page covers the first generation, built from 1985 to 1999 as a four-door sedan. A full vinyl wrap of this luxury car takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film the estimate is about 76 ft (23 m).

1generations19.5 mof film for a full wrap

Bentley Turbo R, first generation, factory photo
Bentley Turbo R, first generation. Factory color shown.

Bentley Turbo R wrap colors and ideas

  • Turbo R black wrap
  • Turbo R white wrap
  • Turbo R gray wrap
  • Turbo R silver wrap
  • Turbo R red wrap
  • Turbo R blue wrap
  • Turbo R green wrap
  • Turbo R yellow wrap
  • Turbo R orange wrap
  • Turbo R purple wrap
  • Turbo R pink wrap
  • Turbo R teal wrap
  • Turbo R brown wrap
  • Turbo R gold wrap
  • Turbo R chrome wrap
  • Turbo R color shift wrap
  • Turbo R carbon fiber wrap
  • Turbo R camo and patterned wrap

How much vinyl to wrap a Bentley Turbo R

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1999sedan (4 doors)208.4 in (5,294 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Turbo R wrap cost factors

Turbo R wrap cost depends on the film type, the number of cut-outs and the surface prep. A full color change needs about 64 ft (19.5 m) of cast film, while chrome or patterned film runs to about 76 ft (23 m). The size of the sedan, 208.4 in (5,294 mm), means more film and more labor than on a smaller car.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: sedan (4 doors).

Turbo R wraps by generation

Swipe sideways. Tap a card for the full description.

Bentley Turbo R, first generation, factory photo
Factory color shown

1985–1999 Turbo R sedan (first generation)

1985–1999sedan (4 doors)208.4 in (5,294 mm)

The first generation Bentley Turbo R was built from 1985 to 1999 as a sedan. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The installer can then check adhesion and see whether paint lifts when the film is repositioned.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Turbo R

A partial wrap on a Turbo R can cover the roof, the hood or the mirror caps. A chrome delete turns the bright window trim and badges black with film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Bentley Turbo R: body, cut-outs and film

A Bentley Turbo R vinyl wrap is planned around one large four-door sedan body. The car measures 208.4 in (5,294 mm) long, so the main surfaces are the roof, hood, trunk, doors and long rear quarters. The wrap layout starts from the film estimate of about 64 ft (19.5 m) for the whole body.

Turbo R wrap ideas begin with the parts that need the most prep. The grille, door handles, badges, mirrors and window trim come off or are cut around carefully. The long hood and the flat sides call for a two-person stretch and steady heat control.

How much vinyl to wrap a Turbo R depends on the generation shown here. This page covers only the first generation, from 1985 to 1999, with one sedan body. The film estimate is the same for every year of this generation because the body does not change shape.

Questions about wrapping a Bentley Turbo R

How much vinyl does it take to wrap a Bentley Turbo R?

A Bentley Turbo R takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full wrap. If the film is chrome or patterned, the estimate rises to about 76 ft (23 m).

Can I wrap only the hood or the roof of a Turbo R?

Yes, you can wrap only the hood or the roof of a Turbo R. A partial wrap can also cover the mirror caps, while a chrome delete does the window trim and badges, and PPF protects the front end.

Is a Turbo R hard to wrap?

A Turbo R is moderately hard to wrap because of its size. The sedan is 208.4 in (5,294 mm) long, with a long hood and flat sides that need extra hands and heat control. The grille, handles and trim add cut-out work.

How many generations of the Turbo R does this page cover?

This page covers one generation of the Turbo R. The first generation was built from 1985 to 1999 as a four-door sedan.