Wraps by car

Bentley T-Series wrap

The Bentley T-Series wrap page covers the first generation built from 1965 to 1980. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) for the coupe to 62 ft (19 m) for the sedan. Using 60-inch (1.52 m) cast film gives a clean fit on the large panels.

1generations18.5 mof film for a full wrap

Bentley T-Series, first generation, factory photo
Bentley T-Series, first generation. Factory color shown.

Bentley T-Series wrap colors and ideas

  • T-Series black wrap
  • T-Series white wrap
  • T-Series gray wrap
  • T-Series silver wrap
  • T-Series red wrap
  • T-Series blue wrap
  • T-Series green wrap
  • T-Series yellow wrap
  • T-Series orange wrap
  • T-Series purple wrap
  • T-Series pink wrap
  • T-Series teal wrap
  • T-Series brown wrap
  • T-Series gold wrap
  • T-Series chrome wrap
  • T-Series color shift wrap
  • T-Series carbon fiber wrap
  • T-Series camo and patterned wrap

How much vinyl to wrap a Bentley T-Series

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1965–1980coupe, sedan (2 or 4 doors)203.5 in (5,170 mm)about 61 ft (18.5 m) for the coupe to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

T-Series wrap cost factors

T-Series wrap cost depends on the body style and the film you choose. Film for the coupe starts at about 61 ft (18.5 m) and the sedan at 62 ft (19 m), and a patterned or chrome film can need up to 72 ft (22 m). The number of trims and cut-outs adds labor time to the job.

  • Film for a full wrap: about 61 ft (18.5 m) for the coupe to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: coupe, sedan (2 or 4 doors).

T-Series wraps by generation

Swipe sideways. Tap a card for the full description.

Bentley T-Series, first generation, factory photo
Factory color shown

1965–1980 T-Series coupe, sedan (first generation)

1965–1980coupe, sedan (2 or 4 doors)203.5 in (5,170 mm)

The first generation Bentley T-Series was produced from 1965 to 1980 as a coupe or sedan. The coupe has fewer panels and a shorter roof, so it uses less film than the sedan. The sedan's four doors and larger glass area require more careful measuring and cutting.

Film: about 61 ft (18.5 m) for the coupe to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a T-Series

A partial wrap on a Bentley T-Series can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Bentley T-Series: body, cut-outs and film

A Bentley T-Series vinyl wrap follows the body style you have. The coupe and sedan share the 203.5 in (5,170 mm) length, so the main panels are similar. The sedan's extra doors and roof structure add more film than the coupe.

T-Series wrap ideas work best when the brightwork is planned early. The window trim and badges can be covered with black film for a chrome delete, and the mirror caps come off for a neat edge. Door handles and trim pieces need careful relief cuts around the recesses.

To know how much vinyl to wrap a T-Series, start with the body style. The coupe uses about 61 ft (18.5 m) of 60-inch (1.52 m) film, while the sedan takes roughly 62 ft (19 m). A chrome or patterned film can push the total up to about 72 ft (22 m).

Questions about wrapping a Bentley T-Series

How much vinyl does it take to wrap a Bentley T-Series?

A Bentley T-Series needs about 61 ft (18.5 m) of vinyl for the coupe or 62 ft (19 m) for the sedan. These figures are for 60-inch (1.52 m) cast film and cover the entire body. A chrome or patterned film can raise the amount to about 72 ft (22 m).

Which T-Series body takes more film?

The sedan takes more film than the coupe. The sedan's extra doors and roof area bring the estimate to about 62 ft (19 m), while the coupe is around 61 ft (18.5 m). Both use 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a T-Series?

Yes, you can wrap only the hood or the roof of a T-Series. A partial wrap can cover the roof, hood, or mirror caps. The hood is a single large panel, and the roof is bounded by the window trim and gutters.

Is a T-Series hard to wrap?

A T-Series is not hard to wrap, but its size adds work. The 203.5 in (5,170 mm) length means long panels and careful film handling. The chrome window trim and badges need cut-outs, and the mirror caps come off for a clean install.