Wraps by car

Bentley R Type wrap

The Bentley R Type wrap guide covers a single generation built from 1952 to 1955. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) for the convertible to 62 ft (19 m) for the sedan. The estimates use 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

Bentley R Type, first generation, factory photo
Bentley R Type, first generation. Factory color shown.

Bentley R Type wrap colors and ideas

  • R Type black wrap
  • R Type white wrap
  • R Type gray wrap
  • R Type silver wrap
  • R Type red wrap
  • R Type blue wrap
  • R Type green wrap
  • R Type yellow wrap
  • R Type orange wrap
  • R Type purple wrap
  • R Type pink wrap
  • R Type teal wrap
  • R Type brown wrap
  • R Type gold wrap
  • R Type chrome wrap
  • R Type color shift wrap
  • R Type carbon fiber wrap
  • R Type camo and patterned wrap

How much vinyl to wrap a Bentley R Type

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1952–1955convertible, coupe, sedan (2 or 4 doors)200.0 in (5,080 mm)about 61 ft (18.5 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

R Type wrap cost factors

R Type wrap cost depends on the body style and the film width, because the car measures 200.0 in (5,080 mm) bumper to bumper. The estimate is 61 ft (18.5 m) for the convertible to 62 ft (19 m) for the sedan in 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 70 ft (21.5 m) and adds cutting time.

  • Film for a full wrap: about 61 ft (18.5 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

R Type wraps by generation

Swipe sideways. Tap a card for the full description.

Bentley R Type, first generation, factory photo
Factory color shown

1952–1955 R Type convertible, coupe, sedan (first generation)

1952–1955convertible, coupe, sedan (2 or 4 doors)200.0 in (5,080 mm)

The open top of the first-generation Bentley R Type is what makes the convertible wrap different. The fabric top is not wrapped and the film ends where it begins at the body line. If the car has a folding hard top, that top is wrapped as panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 61 ft (18.5 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an R Type

An R Type chrome delete covers bright window trim and badges with black film instead of a full color change. A partial wrap of the roof, hood or mirror caps uses much less film than the 61 to 62 ft (18.5 to 19 m) full estimate. Clear paint protection film (PPF) on the front end is a third smaller job for a car owner.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Bentley R Type: body, cut-outs and film

A Bentley R Type vinyl wrap has to follow body styles that range from a 200.0 in (5,080 mm) convertible to a 200.0 in (5,080 mm) sedan. Coupe and two- or four-door sedan panels make large, fairly flat surfaces that a wrap can follow well. The convertible shape changes how film is cut where the door tops meet the folded roof.

R Type wrap ideas begin with the parts an installer has to work around. Lights, door handles, badges and the front grille need cut-outs so the film sits clean around them. On a convertible body the fabric top is not wrapped and the film ends where it begins.

How much vinyl to wrap an R Type depends on which body was built between 1952 and 1955. The only generation offered convertible, coupe and sedan styles, so the lower body shape changes where film is trimmed. The estimate for the convertible is about 61 ft (18.5 m), while the sedan needs about 62 ft (19 m).

Questions about wrapping a Bentley R Type

How much vinyl does it take to wrap a Bentley R Type?

It takes about 61 ft (18.5 m) to 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Bentley R Type. The lower amount fits the convertible and the higher amount fits the sedan of the 1952–1955 generation.

Is the top of an R Type wrapped?

No, the fabric top of an R Type is not wrapped and the film ends where it begins. A folding hard top on the convertible is wrapped as panels of its own.

Which R Type body takes more film?

The sedan of the Bentley R Type takes more film than the convertible. The estimate is about 62 ft (19 m) for the sedan against about 61 ft (18.5 m) for the convertible in 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of an R Type?

Yes, you can wrap only the hood or the roof of an R Type as a partial wrap. Mirror caps are also part of these smaller jobs, and a chrome delete covers window trim and badges.