Wraps by car

Bentley Mark VI wrap

The Bentley Mark VI wrap page covers the 1946–1952 first generation in coupe and sedan styles. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) for the coupe to 61 ft (18.5 m) for the sedan using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 69 ft (21 m).

1generations17.5 mof film for a full wrap

Bentley Mark VI, first generation, factory photo
Bentley Mark VI, first generation. Factory color shown.

Bentley Mark VI wrap colors and ideas

  • Mark VI black wrap
  • Mark VI white wrap
  • Mark VI gray wrap
  • Mark VI silver wrap
  • Mark VI red wrap
  • Mark VI blue wrap
  • Mark VI green wrap
  • Mark VI yellow wrap
  • Mark VI orange wrap
  • Mark VI purple wrap
  • Mark VI pink wrap
  • Mark VI teal wrap
  • Mark VI brown wrap
  • Mark VI gold wrap
  • Mark VI chrome wrap
  • Mark VI color shift wrap
  • Mark VI carbon fiber wrap
  • Mark VI camo and patterned wrap

How much vinyl to wrap a Bentley Mark VI

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1946–1952coupe, sedan (2 or 4 doors)192.0 in (4,877 mm)about 57 ft (17.5 m) for the coupe to 61 ft (18.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Mark VI wrap cost factors

Mark VI wrap cost depends on the body style, film type, and how much of the bright trim is covered. The sedan takes about 61 ft (18.5 m) of 60-inch (1.52 m) film, a bit more than the coupe at 57 ft (17.5 m). Chrome or patterned film raises the amount to about 69 ft (21 m). The number of cut-outs for badges and grille also affects labour.

  • Film for a full wrap: about 57 ft (17.5 m) for the coupe to 61 ft (18.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: coupe, sedan (2 or 4 doors).

Mark VI wraps by generation

Swipe sideways. Tap a card for the full description.

Bentley Mark VI, first generation, factory photo
Factory color shown

1946–1952 Mark VI coupe, sedan (first generation)

1946–1952coupe, sedan (2 or 4 doors)192.0 in (4,877 mm)

The first generation Bentley Mark VI, built from 1946 to 1952, came as a coupe or sedan with two or four doors. The body style decides the panel plan and the film amount, with the coupe needing about 57 ft (17.5 m) of 60-inch (1.52 m) cast film and the sedan about 61 ft (18.5 m). Both styles share the same 192.0 in (4,877 mm) length, so the sedan's extra film goes into the rear doors and roof.

Film: about 57 ft (17.5 m) for the coupe to 61 ft (18.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Mark VI

A Mark VI chrome delete covers the window trim and badges with black film, a smaller job than a full wrap. For a partial wrap, the roof, hood, or mirror caps can be wrapped on their own. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Bentley Mark VI: body, cut-outs and film

A Bentley Mark VI vinyl wrap is shaped by the car's 192.0 in (4,877 mm) length and its two body styles. The coupe needs about 57 ft (17.5 m) of 60-inch (1.52 m) film, while the sedan needs about 61 ft (18.5 m). Both styles have long, flat panels that suit large film pieces. The sedan's four doors add more cut edges than the coupe.

Mark VI wrap ideas should account for the bright trim around the windows and the standalone badges. The window trim and badges are removed or masked for a clean chrome delete, where bright trim is covered with black film. Door handles and mirrors come off for a proper wrap, and the panel gaps on this 1940s body are wide enough to tuck film neatly.

To plan how much vinyl to wrap a Mark VI, note that this page covers only the 1946–1952 first generation. The coupe takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film and the sedan about 61 ft (18.5 m). Chrome or patterned film adds up to about 69 ft (21 m) because of pattern matching and trim coverage.

Questions about wrapping a Bentley Mark VI

How much vinyl does it take to wrap a Bentley Mark VI?

A full wrap takes about 57 ft (17.5 m) for the coupe to 61 ft (18.5 m) for the sedan. This is based on 60-inch (1.52 m) cast film for the 1946–1952 first generation. Chrome or patterned film can need up to about 69 ft (21 m).

Which Mark VI body takes more film?

The sedan takes more film than the coupe. The sedan needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, while the coupe needs about 57 ft (17.5 m). The extra film goes into the rear doors and extra roof area.

Can I wrap only the hood or the roof of a Mark VI?

Yes, a partial wrap of the hood or roof is possible on a Mark VI. The roof, hood, or mirror caps can be wrapped on their own. A chrome delete of the window trim and badges is also a smaller job than a full wrap.

Is a Mark VI hard to wrap?

A Mark VI is not especially hard to wrap, but its 192.0 in (4,877 mm) length and many bright trim pieces add work. The window trim and badges need removal or masking for a clean finish, and the wide panel gaps of this 1940s body help with tucking film. The long flat panels allow large film pieces, but alignment takes time.