Wraps by car

Daewoo Gentra wrap

The Daewoo Gentra wrap page covers both generations of this compact sedan and hatchback. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. First-generation cars from 2005 to 2011 use less film, while second-generation cars from 2013 to 2016 need slightly more.

2generations17 mof film for a full wrap

Daewoo Gentra, second generation, factory photo
Daewoo Gentra, second generation. Factory color shown.

Daewoo Gentra wrap colors and ideas

  • Gentra black wrap
  • Gentra white wrap
  • Gentra gray wrap
  • Gentra silver wrap
  • Gentra red wrap
  • Gentra blue wrap
  • Gentra green wrap
  • Gentra yellow wrap
  • Gentra orange wrap
  • Gentra purple wrap
  • Gentra pink wrap
  • Gentra teal wrap
  • Gentra brown wrap
  • Gentra gold wrap
  • Gentra chrome wrap
  • Gentra color shift wrap
  • Gentra carbon fiber wrap
  • Gentra camo and patterned wrap

How much vinyl to wrap a Daewoo Gentra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2016sedan (4 doors)177.8 in (4,515 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
2005–2011hatchback, sedan (4 or 5 doors)155.1 in (3,940 mm) to 169.7 in (4,310 mm)about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Gentra wrap cost factors

Gentra wrap cost depends on the film length, the body style, and the amount of trim work on the car. A second-generation sedan requires about 56 ft (17 m) of 60-inch film, while a first-generation hatchback requires about 51 ft (15.5 m). Chrome delete on every trim's bright moldings adds time and labor because those parts must be wrapped separately or masked off. Sunroof cut-outs on some second-generation trims and fog lamp openings on every trim also increase the installer's work.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Gentra wraps by generation

Swipe sideways. Tap a card for the full description.

Daewoo Gentra, second generation, factory photo
Factory color shown

2013–2016 Gentra sedan (second generation)

2013–2016sedan (4 doors)177.8 in (4,515 mm)

The second-generation Daewoo Gentra is a four-door sedan with a length of 177.8 in (4,515 mm), and that size means more film than the first generation. Its single body style makes panel count straightforward: two bumpers, four doors, hood, trunk lid, roof, and two quarter panels. A full wrap of this car takes about 56 ft (17 m) of 60-inch cast film. Because every trim has fog lamps, the front bumper film needs cut-outs that add to the job's precision.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Daewoo Gentra, first generation, factory photo
Factory color shown

2005–2011 Gentra hatchback, sedan (first generation)

2005–2011hatchback, sedan (4 or 5 doors)155.1 in (3,940 mm) to 169.7 in (4,310 mm)

On a first-generation Daewoo Gentra from 2005 to 2011, paint age matters before you wrap the car. The panels may be original or repainted, and a test spot tells you if the paint can take the vinyl. The car comes as a hatchback or a sedan with four or five doors, and its length ranges from 155.1 in (3,940 mm) to 169.7 in (4,310 mm). A wrap on this older body often follows repair or paint work, so the surface must be clean and cured.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Gentra

Gentra chrome delete and partial wrap jobs let you change specific areas without a full wrap. You can wrap the roof, the hood, and the mirror caps in a different color from the rest of the car. For the chrome delete, you cover the window trim, the decorative moldings on every trim, and the badges with black film. Paint protection film (PPF) is another option: a clear film on the front end guards the bumper, hood, and fenders against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daewoo Gentra: body, cut-outs and film

Daewoo Gentra vinyl wrap planning starts with the body style and length of the car. The second-generation sedan is 177.8 in (4,515 mm) long and needs about 56 ft (17 m) of film. First-generation cars vary from 155.1 in (3,940 mm) for the hatchback to 169.7 in (4,310 mm) for the sedan, so they use about 51 to 52 ft (15.5 to 16 m). A shorter hatchback has fewer panels and a smaller tailgate than a longer sedan.

Gentra wrap ideas must account for trim details and cut-outs on each generation. Every second-generation Gentra trim has fog lamps in the front bumper, and those need precise cut-outs in the bumper film. Some second-generation trims have a sunroof, so the roof film is cut around its opening and the edges trimmed neatly. First-generation cars have a tailgate with the rear glass in it, so the film ends at the edge of the glass instead of covering the whole panel.

How much vinyl to wrap a Gentra changes between the two generations of the car. The first-generation hatchback uses about 51 ft (15.5 m) of 60-inch cast film, while the first-generation sedan uses about 52 ft (16 m). The second-generation sedan is longer at 177.8 in (4,515 mm), so it needs about 56 ft (17 m) of the same film. If you choose a chrome or patterned film, the estimate rises to about 62 ft (19 m) for the first generation and about 64 ft (19.5 m) for the second.

Questions about wrapping a Daewoo Gentra

How much vinyl does it take to wrap a Daewoo Gentra?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a second-generation Daewoo Gentra sedan. That estimate covers the whole exterior of the newest body, which is 177.8 in (4,515 mm) long. First-generation cars from 2005 to 2011 use less, from 51 to 52 ft (15.5 to 16 m), because they are shorter.

Can the roof of a Gentra be wrapped?

Yes, the roof of a Gentra can be wrapped on either generation. On second-generation cars with a sunroof, the installer cuts the film around the opening and wraps the edges inward if the glass is removed. The roof is a large, flat panel, so it is a good place for a partial wrap or a different color.

Can I wrap only the hood or the roof of a Gentra?

Yes, you can wrap only the hood or the roof of a Gentra. A partial wrap on the hood, roof, or mirror caps changes the look without a full wrap's film amount. These panels are smaller, so they use less material and take less time than a full wrap.

Is a Gentra hard to wrap?

A Gentra is not the hardest car to wrap, but a few things add work. The first-generation tailgate includes the rear glass, so the film must end cleanly at the glass edge. Every second-generation trim has fog lamps, and the bumper film needs cut-outs that are time-consuming to do well.