Wraps by car

Daewoo Tosca wrap

The Daewoo Tosca wrap covers the first generation of this mid-size sedan, built from 2006 to 2011. A full vinyl wrap on the sedan body uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, plan for about 69 ft (21 m).

1generations18 mof film for a full wrap

Daewoo Tosca, first generation, factory photo
Daewoo Tosca, first generation. Factory color shown.

Daewoo Tosca wrap colors and ideas

  • Tosca black wrap
  • Tosca white wrap
  • Tosca gray wrap
  • Tosca silver wrap
  • Tosca red wrap
  • Tosca blue wrap
  • Tosca green wrap
  • Tosca yellow wrap
  • Tosca orange wrap
  • Tosca purple wrap
  • Tosca pink wrap
  • Tosca teal wrap
  • Tosca brown wrap
  • Tosca gold wrap
  • Tosca chrome wrap
  • Tosca color shift wrap
  • Tosca carbon fiber wrap
  • Tosca camo and patterned wrap

How much vinyl to wrap a Daewoo Tosca

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2011sedan (4 doors)189.2 in (4,805 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Tosca wrap cost factors

Tosca wrap cost depends on the size of the car, the film type and the condition of the paint. A full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast film, and chrome or patterned film adds about 10 ft (3 m). The four doors, long roof and bumpers mean more labor than on a two-door car. Paint correction before wrapping adds work when the 2006–2011 panels have chips or rough spots.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Tosca wraps by generation

Swipe sideways. Tap a card for the full description.

Daewoo Tosca, first generation, factory photo
Factory color shown

2006–2011 Tosca sedan (first generation)

2006–2011sedan (4 doors)189.2 in (4,805 mm)

The first generation Daewoo Tosca was built from 2006 to 2011 as a mid-size four-door sedan with the internal code V250. Paint age on a car of these years can vary between original panels and repainted areas, so a test spot comes before a full wrap. The length of 189.2 in (4,805 mm) set the film math for this generation. A wrap installer checks each panel for old clear coat damage before laying film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Tosca

The Tosca supports smaller jobs than a full wrap. A partial wrap can cover the roof, hood or mirror caps with the same cast film. Tosca chrome delete changes the window trim and badges to black film. Paint protection film (PPF) on the front end uses clear film on the bumper, hood edge and mirrors.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daewoo Tosca: body, cut-outs and film

The Daewoo Tosca vinyl wrap starts with one body style: a four-door sedan that is 189.2 in (4,805 mm) long. The mid-size shape means a full wrap uses more film than a small car but less than a large SUV. The sedan has no separate trunk lid on the roofline, so the roof and rear window area wrap as one continuous panel. A wrap on this car needs careful measuring around the four doors and deep bumpers.

Tosca wrap ideas often begin with the areas that need cut-outs or removal. Installers remove the door handles, mirror caps, badges and antenna before wrapping the large door and fender panels. The front and rear bumpers come off for clean edges around the grille, fog lights and exhaust cut-outs. Wrap seams are hidden along the door edges and under the hood and trunk lips.

How much vinyl to wrap a Tosca stays the same across its production years because the catalog lists one generation. The sedan body and its 189.2 in (4,805 mm) length did not change from 2006 to 2011. A wrapper counting film for this car uses the same 59 ft (18 m) estimate for every year. The only adjustment is for film choice, because chrome or patterned film needs about 69 ft (21 m).

Questions about wrapping a Daewoo Tosca

How much vinyl does it take to wrap a Daewoo Tosca?

A Daewoo Tosca full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. That figure is the estimate for the newest body, the 2006–2011 first generation sedan. If you choose chrome or patterned film, the amount rises to about 69 ft (21 m).

Can I wrap only the hood or the roof of a Tosca?

Yes, you can wrap only the hood or the roof of a Tosca. The partial wrap options for this sedan are roof, hood or mirror caps. A hood-only wrap uses a fraction of the 59 ft (18 m) full-wrap estimate. The roof panel is large but flat, so it is one of the easier partial jobs on this car.

Is a Tosca hard to wrap?

A Tosca has a few points that add work for a wrapper. The car is a mid-size sedan at 189.2 in (4,805 mm) long, so full wrap needs about 59 ft (18 m) of 60-inch (1.52 m) cast film. The four doors, bumpers and mirror caps need to come off for clean edges. Paint condition on a 2006–2011 car can require extra prep before film goes on.

How many generations of the Tosca does this page cover?

This page covers one generation of the Daewoo Tosca. The catalog lists the first generation, built from 2006 to 2011 as a four-door sedan with code V250. The body length stayed at 189.2 in (4,805 mm) for all years. A wrap estimate for this car uses the same film figure for every production year.