Wraps by car

Daewoo Lacetti wrap

This page covers the Daewoo Lacetti wrap, a compact car built from 2002 to 2009 in one generation. The Lacetti came as a hatchback and a sedan with four or five doors. A full vinyl wrap takes about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the sedan. These figures assume 60-inch (1.52 m) cast film on the newest body.

1generations17 mof film for a full wrap

Daewoo Lacetti, first generation, factory photo
Daewoo Lacetti, first generation. Factory color shown.

Daewoo Lacetti wrap colors and ideas

  • Lacetti black wrap
  • Lacetti white wrap
  • Lacetti gray wrap
  • Lacetti silver wrap
  • Lacetti red wrap
  • Lacetti blue wrap
  • Lacetti green wrap
  • Lacetti yellow wrap
  • Lacetti orange wrap
  • Lacetti purple wrap
  • Lacetti pink wrap
  • Lacetti teal wrap
  • Lacetti brown wrap
  • Lacetti gold wrap
  • Lacetti chrome wrap
  • Lacetti color shift wrap
  • Lacetti carbon fiber wrap
  • Lacetti camo and patterned wrap

How much vinyl to wrap a Daewoo Lacetti

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2009hatchback, sedan (4 or 5 doors)169.1 in (4,295 mm) to 177.2 in (4,501 mm)about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Lacetti wrap cost factors

Lacetti wrap cost is driven by the film amount, the body style and the labor of the install. The hatchback needs about 49 ft (15 m) and the sedan about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film can push the total up to about 64 ft (19.5 m) because of pattern matching. The cost of a partial wrap is lower, while paint protection film on the front end adds material and preparation.

  • Film for a full wrap: about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Lacetti wraps by generation

Swipe sideways. Tap a card for the full description.

Daewoo Lacetti, first generation, factory photo
Factory color shown

2002–2009 Lacetti hatchback, sedan (first generation)

2002–2009hatchback, sedan (4 or 5 doors)169.1 in (4,295 mm) to 177.2 in (4,501 mm)

The first generation Daewoo Lacetti is the only generation in the catalog, sold from 2002 to 2009 as a hatchback and a four or five door sedan. The body style decides the panel plan, because the hatchback has a short tail with a glass-in-panel tailgate. The sedan's separate trunk lid and longer rear quarters add film and an extra seam. The wrap estimate of 49 ft (15 m) to 56 ft (17 m) reflects that difference.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Lacetti

A partial wrap on a Daewoo Lacetti can cover the roof, the hood or the mirror caps without wrapping the whole car. A chrome delete turns the window trim and badges black with film, giving the Lacetti a cleaner look. Paint protection film (PPF) is a clear film applied to the front end to guard the bumper, hood and fenders. These jobs use far less material than a full wrap and can be done on any body style.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daewoo Lacetti: body, cut-outs and film

A Daewoo Lacetti vinyl wrap is sized by the body style and the precise length of each vehicle. The hatchback runs 169.1 in (4,295 mm) to 177.2 in (4,501 mm), and the sedan has a longer tail that adds film. The wrap estimator lists 49 ft (15 m) for the hatchback and 56 ft (17 m) for the sedan. Knowing the exact body and doors before ordering avoids a shortage mid-install.

Lacetti wrap ideas start with the tailgate, because the rear glass sits in that panel and the film ends at the edge of the glass. The installer trims around the glass instead of wrapping over it, so the cut-out is part of the job. Door handles, mirrors and badges also need cut-outs or come off before the film goes on. Planning those areas makes the wrap cleaner and the film estimate more accurate.

How much vinyl to wrap a Lacetti depends on the generation, and this car has only one generation in the catalog. The hatchback and sedan share the same body codes and the same panel count on the sides and roof. The film amount changes with the body style, from 49 ft (15 m) to 56 ft (17 m), not between generations. A buyer counting film can use the same estimate for any 2002–2009 Lacetti of that style.

Questions about wrapping a Daewoo Lacetti

How much vinyl does it take to wrap a Daewoo Lacetti?

It takes about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the sedan of 60-inch (1.52 m) cast film to wrap a Daewoo Lacetti. Those figures come from the film estimate of the newest body in the catalog. If you use chrome or patterned film, plan for up to about 64 ft (19.5 m). The final amount depends on the exact body style and the installer's waste.

Which Lacetti body takes more film?

The sedan takes more film than the hatchback, about 56 ft (17 m) against 49 ft (15 m). The estimate uses the same 60-inch (1.52 m) cast film for both styles. The sedan's longer tail and separate trunk lid add the extra length of vinyl. A chrome or patterned wrap on either style can need up to about 64 ft (19.5 m).

Can I wrap only the hood or the roof of a Lacetti?

Yes, you can wrap only the hood or the roof of a Lacetti as a partial job. The page's partial wrap list includes the roof, hood and mirror caps. A chrome delete on the window trim and badges is another small job. Paint protection film on the front end is also a partial option that leaves the rest of the car untouched.

Is a Lacetti hard to wrap?

A Lacetti is not especially hard to wrap, but the tailgate adds one clear step on the hatchback. The rear glass sits in the tailgate, so the film ends at the edge of the glass and needs a clean cut-out. The car is a compact at 169.1 in (4,295 mm) to 177.2 in (4,501 mm), so there is less surface than on a large sedan. Careful work around the glass and badges adds time but not major difficulty.