Wraps by car

Daewoo Nexia wrap

The Daewoo Nexia wrap page covers the first-generation Nexia from 1994 to 2016. This catalog shows the compact car in hatchback and sedan body styles with three, four, or five doors. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Owners who choose chrome or patterned film should plan for about 61 ft (18.5 m).

1generations15 mof film for a full wrap

Daewoo Nexia, first generation, factory photo
Daewoo Nexia, first generation. Factory color shown.

Daewoo Nexia wrap colors and ideas

  • Nexia black wrap
  • Nexia white wrap
  • Nexia gray wrap
  • Nexia silver wrap
  • Nexia red wrap
  • Nexia blue wrap
  • Nexia green wrap
  • Nexia yellow wrap
  • Nexia orange wrap
  • Nexia purple wrap
  • Nexia pink wrap
  • Nexia teal wrap
  • Nexia brown wrap
  • Nexia gold wrap
  • Nexia chrome wrap
  • Nexia color shift wrap
  • Nexia carbon fiber wrap
  • Nexia camo and patterned wrap

How much vinyl to wrap a Daewoo Nexia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2016hatchback, sedan (3 or 4 or 5 doors)167.6 in (4,256 mm) to 176.5 in (4,482 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Nexia wrap cost factors

The Nexia wrap cost depends on the amount of film needed for the body style, with about 49 ft (15 m) for a standard color change. A chrome or patterned film raises the amount to about 61 ft (18.5 m) because patterns must be matched across panels. The installer's labor also depends on whether the car has fog lamps that require cut-outs or a tailgate with glass that needs precise trimming. A partial wrap on the roof or hood will use less film and less labor than a full body wrap.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback, sedan (3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2002: bumpers and lights differ between the versions, and so do the film cuts.

Nexia wraps by generation

Swipe sideways. Tap a card for the full description.

Daewoo Nexia, first generation, factory photo
Factory color shown

1994–2016 Nexia hatchback, sedan (first generation)

1994–2016hatchback, sedan (3 or 4 or 5 doors)167.6 in (4,256 mm) to 176.5 in (4,482 mm)

The single generation of the Daewoo Nexia ran from 1994 to 2016, with a restyling in 2002. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. Owners of pre-2002 cars should note that the front and rear bumper shapes are different, and the taillight openings in the film differ as well. The core body panels such as the hood, roof, and doors remain interchangeable for wrapping purposes.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Nexia

Partial wrap options on a Nexia include the roof, hood, and mirror caps, which use a fraction of the full wrap film. Nexia chrome delete covers the window trim and badges with black film to change the bright finish. Paint protection film (PPF) on the front end is a clear film that guards the hood, bumper, and fenders against stone chips. These smaller jobs allow owners to change a specific area without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daewoo Nexia: body, cut-outs and film

The Daewoo Nexia vinyl wrap must follow the car's compact dimensions of 167.6 in (4,256 mm) to 176.5 in (4,482 mm). The hatchback and sedan shapes present different surface areas, so a professional measures each panel before cutting film. The three-door version has longer doors that need wider film sections than the five-door. All body styles have simple curves that allow a clean installation without excessive stretching.

Nexia wrap ideas start with the tailgate that includes the rear glass, so the film ends neatly at the glass edge. Some trims have fog lamps in the front bumper, and the installer cuts out openings in the bumper film. Door handles, mirrors, and badges are removed or masked for a smooth wrap. The roof rails on high-roof models are not present on this car, which simplifies the roof film installation.

How much vinyl to wrap a Nexia depends on whether you have the hatchback or the sedan, because panel sizes differ. The first generation was restyled in 2002 with new bumpers and lights, so older cars need slightly different film cuts than newer ones. A three-door Nexia uses less film on the side panels than a five-door, while the roof and hood remain the same. The total estimate of about 49 ft (15 m) covers a standard color change wrap with no extra material for mistakes.

Questions about wrapping a Daewoo Nexia

How much vinyl does it take to wrap a Daewoo Nexia?

A full wrap of a Daewoo Nexia takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. This estimate applies to the newest body style of the single generation. If you use chrome or patterned film, plan for about 61 ft (18.5 m) to allow for pattern matching and waste.

Which years of the Nexia take the same film cuts?

The Nexia years from 1994 to 2001 and from 2002 to 2016 each take different film cuts. The 2002 restyling changed the bumpers and lights, so pre-2002 and post-2002 cars do not share the same bumper film patterns. The main body panels are unchanged across the generation, but the bumper film must match the correct version.

Which Nexia body takes more film?

The hatchback and sedan Nexia bodies take roughly the same amount of film because both are compact cars. A three-door hatchback has fewer side window openings, but the longer doors use similar film area as the extra doors on a five-door model. The official film estimate does not distinguish between the body styles, so a full wrap of either style uses about 49 ft (15 m) of standard film.

Can I wrap only the hood or the roof of a Nexia?

Yes, you can wrap only the hood or the roof of a Nexia as a partial wrap. These panels are separate from the rest of the car and can be covered with a smaller amount of film. Partial wrap options also include mirror caps, chrome delete, and paint protection film on the front end.