Wraps by car

Daewoo Lacetti Premiere wrap

This page covers the Daewoo Lacetti Premiere, a single-generation compact sedan produced from 2008 to 2011. A full vinyl wrap of this car takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for standard colors. Choosing chrome or patterned film raises the amount to about 66 ft (20 m).

1generations17 mof film for a full wrap

Daewoo Lacetti Premiere, first generation, factory photo
Daewoo Lacetti Premiere, first generation. Factory color shown.

Daewoo Lacetti Premiere wrap colors and ideas

  • Lacetti Premiere black wrap
  • Lacetti Premiere white wrap
  • Lacetti Premiere gray wrap
  • Lacetti Premiere silver wrap
  • Lacetti Premiere red wrap
  • Lacetti Premiere blue wrap
  • Lacetti Premiere green wrap
  • Lacetti Premiere yellow wrap
  • Lacetti Premiere orange wrap
  • Lacetti Premiere purple wrap
  • Lacetti Premiere pink wrap
  • Lacetti Premiere teal wrap
  • Lacetti Premiere brown wrap
  • Lacetti Premiere gold wrap
  • Lacetti Premiere chrome wrap
  • Lacetti Premiere color shift wrap
  • Lacetti Premiere carbon fiber wrap
  • Lacetti Premiere camo and patterned wrap

How much vinyl to wrap a Daewoo Lacetti Premiere

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2011sedan (4 doors)181.1 in (4,600 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Lacetti Premiere wrap cost factors

The Lacetti Premiere wrap cost depends mainly on the size of the car and the amount of film it requires. A full wrap uses about 56 ft (17 m) of 60-inch film, while chrome or patterned film increases that to 66 ft (20 m). The condition of the paint and the complexity of trim removal also affect the final cost.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

Lacetti Premiere wraps by generation

Swipe sideways. Tap a card for the full description.

Daewoo Lacetti Premiere, first generation, factory photo
Factory color shown

2008–2011 Lacetti Premiere sedan (first generation)

2008–2011sedan (4 doors)181.1 in (4,600 mm)

The first generation Lacetti Premiere was built from 2008 to 2011. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. Any repainted areas need extra attention to ensure the film adheres evenly.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Lacetti Premiere

For owners who do not want a full wrap, a partial wrap on the roof, hood, or mirror caps is a good option. A chrome delete covers window trim and badges with black film. Paint protection film can be applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daewoo Lacetti Premiere: body, cut-outs and film

The Daewoo Lacetti Premiere vinyl wrap is simplified by the single sedan body style with four doors. Its length of 181.1 in (4,600 mm) puts it in the compact class, so film panels can be cut efficiently. The lack of a hatch or wagon variant means you only need to plan for one roofline and trunk shape.

Wrap ideas for the Lacetti Premiere include covering the large flat roof and hood, which are straightforward areas. The door handles, mirrors, badges, and window trim should be removed or masked for clean edges. Any remaining chrome on the grille or trunk can be covered with black film for a chrome delete.

To figure how much vinyl to wrap a Lacetti Premiere, note that only one generation exists, so measurements stay constant across all years. The fixed body dimensions mean you will not need extra film for longer or wider variants. Ordering the stated amount of 56 ft (17 m) of standard cast film is sufficient for a full color change.

Questions about wrapping a Daewoo Lacetti Premiere

How much vinyl does it take to wrap a Daewoo Lacetti Premiere?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Daewoo Lacetti Premiere. If you choose chrome or patterned film, plan for about 66 ft (20 m) instead.

Can I wrap only the hood or the roof of a Lacetti Premiere?

Yes, you can wrap only the hood or the roof of a Lacetti Premiere. These partial wraps are a practical way to change the look or add protection without covering the whole car.

Is a Lacetti Premiere hard to wrap?

The Lacetti Premiere is moderately hard to wrap because of its size and some details. At 181.1 in (4,600 mm) long, it is a compact car but still requires careful handling of mirrors, handles, and trim. Removing or masking these parts adds time to the job.

How many generations of the Lacetti Premiere does this page cover?

This page covers one generation of the Lacetti Premiere, produced from 2008 to 2011.