Wraps by car

Foton eToano wrap

The Foton eToano wrap page covers the first generation of this electric van, produced from 2025 onward. A full vinyl wrap of the newest body uses about 97 ft (29.5 m) of 60-inch (1.52 m) cast film. The page also notes that chrome or patterned film increases the amount to roughly 110 ft (33.5 m).

1generations29.5 mof film for a full wrap

Foton eToano, first generation, factory photo
Foton eToano, first generation. Factory color shown.

Foton eToano wrap colors and ideas

  • eToano black wrap
  • eToano white wrap
  • eToano gray wrap
  • eToano silver wrap
  • eToano red wrap
  • eToano blue wrap
  • eToano green wrap
  • eToano yellow wrap
  • eToano orange wrap
  • eToano purple wrap
  • eToano pink wrap
  • eToano teal wrap
  • eToano brown wrap
  • eToano gold wrap
  • eToano chrome wrap
  • eToano color shift wrap
  • eToano carbon fiber wrap
  • eToano camo and patterned wrap

How much vinyl to wrap a Foton eToano

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowvan (4 doors)235.8 in (5,990 mm)about 97 ft (29.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 110 ft (33.5 m)

eToano wrap cost factors

The eToano wrap cost depends on the size of the van and the film type you choose. A full wrap uses about 97 ft (29.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs roughly 110 ft (33.5 m). The sliding door tracks and the separate charge port door also add labor time.

  • Film for a full wrap: about 97 ft (29.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 110 ft (33.5 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Electric car: the charge port door is wrapped as a small piece of its own.

eToano wraps by generation

Swipe sideways. Tap a card for the full description.

Foton eToano, first generation, factory photo
Factory color shown

2025–now eToano van (first generation)

2025–nowvan (4 doors)235.8 in (5,990 mm)

The first generation Foton eToano is a four-door van that is 235.8 in (5,990 mm) long. Its sliding side doors require the film to be cut along the tracks, and the tracks stay bare. This detail affects how the wrap is planned and where seams are placed.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 97 ft (29.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 110 ft (33.5 m).

Roof, hood, chrome delete and PPF on an eToano

On an eToano, a partial wrap can cover the roof, hood, or mirror caps. An eToano chrome delete involves covering the window trim and badges with black film. Paint protection film (PPF) is another option, with clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Foton eToano: body, cut-outs and film

A Foton eToano vinyl wrap on the van body means covering a long, tall vehicle that measures 235.8 in (5,990 mm) in length. The single body style is a four-door van, so the wrap work is concentrated on large flat panels. Extra film is needed for the roof and the area around the sliding side doors.

For eToano wrap ideas, the two areas that need special attention are the sliding door tracks and the charge port door. The tracks along the sliding side doors stay bare, and the film is cut along them to allow movement. The charge port door is wrapped as a small piece of its own because this is an electric car.

When you are counting film, the figures for how much vinyl to wrap an eToano stay the same for the first generation. The catalog lists only the 2025–now van body, so there are no other factory styles to compare. The estimate is about 97 ft (29.5 m) of 60-inch (1.52 m) cast film for a standard color change wrap.

Questions about wrapping a Foton eToano

How much vinyl does it take to wrap a Foton eToano?

A full wrap of a Foton eToano takes about 97 ft (29.5 m) of 60-inch (1.52 m) cast film. This figure is for the newest body, the 2025–now van. If you use chrome or patterned film, plan for roughly 110 ft (33.5 m).

Are the sliding doors of an eToano wrapped?

No, the sliding door tracks of an eToano are not wrapped. The tracks stay bare, and the film is cut along them so the doors can open and close properly.

Can I wrap only the hood or the roof of an eToano?

Yes, you can wrap only the hood or the roof of an eToano. A partial wrap on this van often includes the roof, hood, or mirror caps. You can also choose a chrome delete for the window trim and badges, or paint protection film (PPF) on the front end.

Is an eToano hard to wrap?

The Foton eToano is not the easiest van to wrap because of its size and the sliding doors. At 235.8 in (5,990 mm) long, it takes a lot of film, about 97 ft (29.5 m) for a full wrap. The sliding door tracks need careful cutting, and the charge port door is wrapped as a separate small piece.