Wraps by car

Foton Sauvana wrap

The Foton Sauvana wrap page covers this SUV in its single generation, produced from 2014 to 2021. A full vinyl wrap of the newest body uses about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 82 ft (25 m).

1generations19.5 mof film for a full wrap

Foton Sauvana, first generation, factory photo
Foton Sauvana, first generation. Factory color shown.

Foton Sauvana wrap colors and ideas

  • Sauvana black wrap
  • Sauvana white wrap
  • Sauvana gray wrap
  • Sauvana silver wrap
  • Sauvana red wrap
  • Sauvana blue wrap
  • Sauvana green wrap
  • Sauvana yellow wrap
  • Sauvana orange wrap
  • Sauvana purple wrap
  • Sauvana pink wrap
  • Sauvana teal wrap
  • Sauvana brown wrap
  • Sauvana gold wrap
  • Sauvana chrome wrap
  • Sauvana color shift wrap
  • Sauvana carbon fiber wrap
  • Sauvana camo and patterned wrap

How much vinyl to wrap a Foton Sauvana

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2021SUV (5 doors)190.2 in (4,830 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Sauvana wrap cost factors

Sauvana wrap cost depends on the amount of film, which is about 64 ft (19.5 m) for a full color change wrap. The tall body and roof rails add labor because the roof is wrapped from a platform and the rails come off or are cut around. Cut-outs for sensors, fog lamps, and cameras add time to the install.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (74.2 in (1,885 mm)): the roof is wrapped from a platform.

Sauvana wraps by generation

Swipe sideways. Tap a card for the full description.

Foton Sauvana, first generation, factory photo
Factory color shown

2014–2021 Sauvana SUV (first generation)

2014–2021SUV (5 doors)190.2 in (4,830 mm)

The first generation Sauvana, built from 2014 to 2021, has roof rails that come off before the roof is wrapped, or the film is cut along them. This step is required on every trim because the rails sit on the roof panel. Removing the rails gives a cleaner edge and avoids lifting later.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (74.2 in (1,885 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Sauvana

A partial wrap on a Sauvana can cover the roof, hood, or mirror caps. For a Sauvana chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear film applied to the front end to protect the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Foton Sauvana: body, cut-outs and film

The Foton Sauvana vinyl wrap has to fit an SUV body that is 190.2 in (4,830 mm) long and 74.2 in (1,885 mm) tall. The five-door body means more film around the doors and the tailgate. The tall roof is wrapped from a platform, which adds time to the job.

Sauvana wrap ideas start with a tailgate that has the rear glass in it, so the film ends at the edge of the glass. Every trim has roof rails which come off before the roof is wrapped, or the film is cut along them. Parking sensors in the bumpers and fog lamps in the front bumper need cut-outs in the film. Some trims have cameras in the body where the film is cut around each lens.

When counting how much vinyl to wrap a Sauvana, the single generation from 2014 to 2021 means one body style. There is no change in size between earlier and later cars of this generation. Your film estimate stays the same for any Sauvana built in those years.

Questions about wrapping a Foton Sauvana

How much vinyl does it take to wrap a Foton Sauvana?

It takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film to wrap a Foton Sauvana. If you choose chrome or patterned film, plan for about 82 ft (25 m). These figures are for the newest body of the single generation.

Can I wrap only the hood or the roof of a Sauvana?

Yes, you can wrap only the hood or the roof of a Sauvana. A partial wrap can also cover the mirror caps or include a chrome delete of the window trim and badges. Paint protection film on the front end is another smaller option.

Is a Sauvana hard to wrap?

Yes, a Sauvana is harder to wrap than a lower vehicle because the body is 74.2 in (1,885 mm) tall, so the roof needs a platform. The roof rails must come off or be cut around, and the bumpers have sensors and fog lamps that require cut-outs. Some trims also have cameras in the body that need the film cut around each lens.

How many generations of the Sauvana does this page cover?

This page covers one generation of the Sauvana, produced from 2014 to 2021. The data includes the SUV body style only.