Wraps by car

Foton View wrap

The Foton View wrap page covers the first generation of this van, produced from 2014 to the present. A full vinyl wrap of the newest body takes about 97 ft (29.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 125 ft (38 m) for the same vehicle.

1generations29.5 mof film for a full wrap

Foton View, first generation, factory photo
Foton View, first generation. Factory color shown.

Foton View wrap colors and ideas

  • View black wrap
  • View white wrap
  • View gray wrap
  • View silver wrap
  • View red wrap
  • View blue wrap
  • View green wrap
  • View yellow wrap
  • View orange wrap
  • View purple wrap
  • View pink wrap
  • View teal wrap
  • View brown wrap
  • View gold wrap
  • View chrome wrap
  • View color shift wrap
  • View carbon fiber wrap
  • View camo and patterned wrap

How much vinyl to wrap a Foton View

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowvan (4 or 5 doors)220.5 in (5,600 mm)about 97 ft (29.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 125 ft (38 m)

View wrap cost factors

The View wrap cost depends on the large size of this van: 220.5 in (5,600 mm) long and 90.0 in (2,285 mm) tall. The amount of film needed, about 97 ft (29.5 m) for a standard wrap, is a major factor. Chrome or patterned film requires about 125 ft (38 m), which increases material cost. The complexity of wrapping the sliding door tracks, charge port door, and roof from a platform also affects the final price.

  • Film for a full wrap: about 97 ft (29.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 125 ft (38 m).
  • Body: van (4 or 5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (90.0 in (2,285 mm)): the roof is wrapped from a platform.

View wraps by generation

Swipe sideways. Tap a card for the full description.

Foton View, first generation, factory photo
Factory color shown

2014–now View van (first generation)

2014–nowvan (4 or 5 doors)220.5 in (5,600 mm)

The first generation Foton View, produced from 2014 to the present, has sliding side doors where the tracks stay bare. The film is cut along these tracks, so the tracks themselves are not covered. This detail determines where the vinyl ends on each side of the van.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (90.0 in (2,285 mm)): the roof is wrapped from a platform.

Film: about 97 ft (29.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 125 ft (38 m).

Roof, hood, chrome delete and PPF on a View

For a View chrome delete, the window trim and badges are covered with black film. A partial wrap can include just the roof, hood, or mirror caps for a smaller color change. Paint protection film (PPF) is also an option: clear film applied to the front end to guard against chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Foton View: body, cut-outs and film

A Foton View vinyl wrap must account for its single body style: a 4- or 5-door van with a length of 220.5 in (5,600 mm). The tall body, at 90.0 in (2,285 mm), means the roof adds significant area to the job. Installers measure the large side panels and roof precisely before cutting film.

View wrap ideas often focus on the sliding side doors, where the door tracks stay bare and the film is cut along them. The charge port door on plug-in and electric versions is wrapped as a small piece of its own. For the tall roof, installers work from a platform to apply film safely and smoothly.

When estimating how much vinyl to wrap a View, the first generation is the only body to consider, as it has been in production from 2014 to now. The film estimate of about 97 ft (29.5 m) allows for the large van panels and roof. For chrome or patterned film, the estimate rises to about 125 ft (38 m) due to additional material for accents.

Questions about wrapping a Foton View

How much vinyl does it take to wrap a Foton View?

It takes about 97 ft (29.5 m) of 60-inch (1.52 m) cast film to wrap a Foton View. This estimate is for the newest body of the first generation, which remains in production.

Are the sliding doors of a View wrapped?

Yes, the sliding doors of a View are wrapped, but the door tracks stay bare. The film is cut along the tracks, so the tracks themselves are not covered.

Can I wrap only the hood or the roof of a View?

Yes, you can wrap only the hood or the roof of a View. A partial wrap on this van may include the roof, hood, or mirror caps, along with chrome delete for the window trim and badges.

Is a View hard to wrap?

Yes, a View is somewhat hard to wrap because of its size and specific details. The van is 220.5 in (5,600 mm) long and 90.0 in (2,285 mm) tall, so the roof requires a platform for installation. The sliding door tracks must remain bare, which demands precise cutting, and the charge port door on plug-in and electric versions is wrapped as a separate small piece.