Wraps by car

Foton I9 wrap

The Foton I9 wrap is a vinyl wrap for the 2025–now passenger van. This catalog covers the first generation only, the sole generation in the catalog. A full wrap of the newest body takes 16 meters of film.

1generations

Foton I9, first generation, factory photo
Foton I9, first generation. Factory color shown.

Foton I9 wrap colors and ideas

  • Foton I9 black wrap
  • Foton I9 white wrap
  • Foton I9 gray wrap
  • Foton I9 silver wrap
  • Foton I9 red wrap
  • Foton I9 blue wrap
  • Foton I9 green wrap
  • Foton I9 yellow wrap
  • Foton I9 orange wrap
  • Foton I9 purple wrap
  • Foton I9 pink wrap
  • Foton I9 teal wrap
  • Foton I9 brown wrap
  • Foton I9 gold wrap
  • Foton I9 chrome wrap
  • Foton I9 color shift wrap
  • Foton I9 carbon fiber wrap
  • Foton I9 camo and patterned wrap

How much vinyl to wrap a Foton I9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowvan (5 doors)——

Foton I9 wrap cost factors

Foton I9 wrap cost depends on the 16 square meters of vinyl and the labor hours for a five-door van. The sliding door tracks add careful cutting work. The installer's hourly rate and the film brand change the final cost.

  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Foton I9 wraps by generation

Swipe sideways. Tap a card for the full description.

Foton I9, first generation, factory photo
Factory color shown

2025–now Foton I9 van (first generation)

2025–nowvan (5 doors)

The first generation Foton I9, from 2025 to now, has sliding side doors. The door tracks stay bare, so the film must be cut along their edges. This keeps the doors moving freely after the wrap is fitted.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Roof, hood, chrome delete and PPF on a Foton I9

Partial wrap on a Foton I9 can cover the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Foton I9: body, cut-outs and film

A Foton I9 vinyl wrap covers a five-door van body. The tall, flat sides and roof hold film well and let one installer work with broad pieces. The single body style keeps cutting and fitting simple across the car.

For Foton I9 wrap ideas, the sliding side doors set the main layout. Their tracks stay bare, so the film is cut along the track lines. The door handles, badges and window trim need cut-outs or removal before wrapping.

To work out how much vinyl to wrap a Foton I9, count one generation from 2025 onward. The body shape has not changed in this catalog, so the same film estimate applies. A full wrap uses 16 meters of vinyl.

Questions about wrapping a Foton I9

How much vinyl does it take to wrap a Foton I9?

It takes 16 meters of vinyl to wrap a Foton I9. That is 172 square feet for the full body of the 2025–now van. The amount includes the roof, sides and rear door but not the sliding door tracks.

Are the sliding doors of a Foton I9 wrapped?

Yes, the sliding doors of a Foton I9 are wrapped. The film is cut along the door tracks so the tracks stay bare and the doors still slide. This leaves a clean edge and protects the paint beside the track.

Can I wrap only the hood or the roof of a Foton I9?

Yes, you can wrap only the hood or the roof of a Foton I9. A partial wrap can cover the roof, hood or mirror caps. The hood is a flat panel that takes a single piece of film.

Is a Foton I9 hard to wrap?

A Foton I9 is not hard to wrap, but the sliding side doors add work. The door tracks must stay bare, so the film is cut along them for each door. The tall body also means the installer works on steps for the roof.