Wraps by car

Foton Toano wrap

The Foton Toano wrap covers this full-size van from 2015 to now, with one generation in the catalog. A complete vinyl wrap of the newest body uses about 87 ft (26.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 102 ft (31 m) for the same coverage.

1generations26.5 mof film for a full wrap

Foton Toano, first generation, factory photo
Foton Toano, first generation. Factory color shown.

Foton Toano wrap colors and ideas

  • Toano black wrap
  • Toano white wrap
  • Toano gray wrap
  • Toano silver wrap
  • Toano red wrap
  • Toano blue wrap
  • Toano green wrap
  • Toano yellow wrap
  • Toano orange wrap
  • Toano purple wrap
  • Toano pink wrap
  • Toano teal wrap
  • Toano brown wrap
  • Toano gold wrap
  • Toano chrome wrap
  • Toano color shift wrap
  • Toano carbon fiber wrap
  • Toano camo and patterned wrap

How much vinyl to wrap a Foton Toano

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowvan (4 or 5 doors)199.4 in (5,065 mm)about 87 ft (26.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 102 ft (31 m)

Toano wrap cost factors

A Toano wrap cost depends on the size of the van, the film type, and the amount of disassembly. The full body is 199.4 in (5,065 mm) long and 96.3 in (2,445 mm) tall, so a standard wrap uses about 87 ft (26.5 m) of cast film. Chrome or patterned film raises the material amount to about 102 ft (31 m). The sliding door tracks and charge port door add cutting and fitting time.

  • Film for a full wrap: about 87 ft (26.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 102 ft (31 m).
  • Body: van (4 or 5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (96.3 in (2,445 mm)): the roof is wrapped from a platform.

Toano wraps by generation

Swipe sideways. Tap a card for the full description.

Foton Toano, first generation, factory photo
Factory color shown

2015–now Toano van (first generation)

2015–nowvan (4 or 5 doors)199.4 in (5,065 mm)

The first generation Foton Toano from 2015 to now has van bodies with 4 or 5 doors. The sliding side doors have tracks that stay bare and decide where the film is cut. A wrap of this generation uses about 87 ft (26.5 m) of 60-inch (1.52 m) cast film, or about 102 ft (31 m) for chrome or patterned film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (96.3 in (2,445 mm)): the roof is wrapped from a platform.

Film: about 87 ft (26.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 102 ft (31 m).

Roof, hood, chrome delete and PPF on a Toano

A partial wrap on a Foton Toano can cover the roof, hood, or mirror caps as single sections. Toano chrome delete covers the window trim and badges with black film for a clean look. Paint protection film (PPF) is often applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Foton Toano: body, cut-outs and film

The Foton Toano vinyl wrap suits a van of 199.4 in (5,065 mm) in length, available with 4 or 5 doors. Large flat side panels make the body straightforward to film, while the tall roof of 96.3 in (2,445 mm) adds surface area. The sliding side doors are wrapped as normal panels, but the tracks stay bare and guide the cuts.

Toano wrap ideas include cut-outs for the sliding door tracks and separate pieces for the charge port door on plug-in and electric versions. The tall body means the roof is wrapped from a platform, so it is often left bare or done in a contrasting color. Mirror caps and door handles are wrapped as small pieces for a clean finish.

How much vinyl to wrap a Toano depends on the version you have, but only one generation is listed from 2015 to now. The 4-door and 5-door body styles differ slightly in door count, yet the film estimate stays close. If you choose chrome or patterned film, plan for about 102 ft (31 m) instead of the standard 87 ft (26.5 m).

Questions about wrapping a Foton Toano

How much vinyl does it take to wrap a Foton Toano?

A Foton Toano wrap takes about 87 ft (26.5 m) of 60-inch (1.52 m) cast film for a full cover. If you use chrome or patterned film, the amount rises to about 102 ft (31 m). These figures are based on the newest body from 2015 to now.

Are the sliding doors of a Toano wrapped?

Yes, the sliding doors of a Toano are wrapped, but the tracks are left bare. The film is cut along the tracks so the doors can still slide. This is a standard step for any wrap of this van.

Can I wrap only the hood or the roof of a Toano?

Yes, you can wrap only the hood or the roof of a Toano. A partial wrap covers the roof, hood, or mirror caps as separate jobs. You can also choose a chrome delete for window trim and badges or clear paint protection film on the front end.

Is a Toano hard to wrap?

A Toano is not the hardest van to wrap, but several features add work. The sliding door tracks must stay bare, so the film is cut precisely along them. The tall body of 96.3 in (2,445 mm) means the roof is wrapped from a platform. On plug-in and electric versions, the charge port door is wrapped as a small separate piece.