Wraps by car

Foton eTunland wrap

A Foton eTunland wrap covers this electric pickup with cast vinyl film. The catalog lists one generation, produced from 2024 onward. A full wrap of the newest body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film.

1generations21 mof film for a full wrap

Foton eTunland, first generation, factory photo
Foton eTunland, first generation. Factory color shown.

Foton eTunland wrap colors and ideas

  • eTunland black wrap
  • eTunland white wrap
  • eTunland gray wrap
  • eTunland silver wrap
  • eTunland red wrap
  • eTunland blue wrap
  • eTunland green wrap
  • eTunland yellow wrap
  • eTunland orange wrap
  • eTunland purple wrap
  • eTunland pink wrap
  • eTunland teal wrap
  • eTunland brown wrap
  • eTunland gold wrap
  • eTunland chrome wrap
  • eTunland color shift wrap
  • eTunland carbon fiber wrap
  • eTunland camo and patterned wrap

How much vinyl to wrap a Foton eTunland

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowpickup (4 doors)210.2 in (5,340 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

eTunland wrap cost factors

eTunland wrap cost is set by the film's total area, the film type, and the labor for the pickup's size. The body needs about 69 ft (21 m) of standard cast film, or 80 ft (24.5 m) for chrome or patterned film. The tall roof and separate bed add time to the installation.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.

eTunland wraps by generation

Swipe sideways. Tap a card for the full description.

Foton eTunland, first generation, factory photo
Factory color shown

2024–now eTunland pickup (first generation)

2024–nowpickup (4 doors)210.2 in (5,340 mm)

The first generation Foton eTunland, built from 2024 onward, presents the pickup bed as a separate wrapping surface. The cab and the bed are two bodies for the film, so seams fall at the natural gap between them. The inside of the bed is not wrapped, which reduces film use.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on an eTunland

A partial wrap on the Foton eTunland can cover the roof, hood, or mirror caps as individual pieces. Chrome delete covers window trim and badges with black film for a monochrome look. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Foton eTunland: body, cut-outs and film

A Foton eTunland vinyl wrap is shaped by the pickup's single body style and its length of 210.2 in (5,340 mm). Four doors and a tall roof add surface area, so film is cut in large sections. The wrap covers the exterior paint, while the bed interior stays unwrapped.

eTunland wrap ideas begin with treating the cab and the bed as two separate bodies for film. The charge port door is wrapped as a small piece of its own. The roof is 73.6 in (1,870 mm) high, so installers use a platform to reach it.

How much vinyl to wrap an eTunland depends on the film type and the wrap's coverage. A standard color change uses about 69 ft (21 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 80 ft (24.5 m) because of extra waste and matching.

Questions about wrapping a Foton eTunland

How much vinyl does it take to wrap a Foton eTunland?

About 69 ft (21 m) of 60-inch (1.52 m) cast film is needed to wrap a Foton eTunland. For chrome or patterned film, the estimate rises to about 80 ft (24.5 m). These figures cover the full exterior of the pickup.

Is the bed of an eTunland wrapped?

No, the inside of the eTunland bed is not wrapped. The cab and the bed are wrapped as two separate bodies, with film applied to their outer surfaces only. The bed floor and inner walls stay bare.

Can I wrap only the hood or the roof of an eTunland?

Yes, you can wrap only the hood or the roof of an eTunland. A partial wrap includes jobs like the roof, hood, and mirror caps. Chrome delete on window trim and badges is another focused option.

Is an eTunland hard to wrap?

An eTunland is more work to wrap than a smaller vehicle. Its length of 210.2 in (5,340 mm) and height of 73.6 in (1,870 mm) mean installers use a platform for the roof. The charge port door and the separate bed add extra cut-outs and seams.