Wraps by car

Maruti Suzuki Alto wrap

This page covers the Maruti Suzuki Alto wrap for the first generation, produced from 2000 to 2012, the only generation in this catalog. A full vinyl wrap of the five-door hatchback takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs more material, about 51 ft (15.5 m) of the same width.

1generations12.5 mof film for a full wrap

Maruti Suzuki Alto, first generation, factory photo
Maruti Suzuki Alto, first generation. Factory color shown.

Maruti Suzuki Alto wrap colors and ideas

  • Alto black wrap
  • Alto white wrap
  • Alto gray wrap
  • Alto silver wrap
  • Alto red wrap
  • Alto blue wrap
  • Alto green wrap
  • Alto yellow wrap
  • Alto orange wrap
  • Alto purple wrap
  • Alto pink wrap
  • Alto teal wrap
  • Alto brown wrap
  • Alto gold wrap
  • Alto chrome wrap
  • Alto color shift wrap
  • Alto carbon fiber wrap
  • Alto camo and patterned wrap

How much vinyl to wrap a Maruti Suzuki Alto

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2012hatchback (5 doors)137.6 in (3,495 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Alto wrap cost factors

Alto wrap cost depends on the film area of this small five-door hatchback, which is 137.6 in (3,495 mm) long and takes about 41 ft (12.5 m) of cast film for a full wrap. The type of film you choose changes the amount: chrome or patterned film needs about 51 ft (15.5 m). The condition of the paint also matters, because older panels may need more prep work.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Alto wraps by generation

Swipe sideways. Tap a card for the full description.

Maruti Suzuki Alto, first generation, factory photo
Factory color shown

2000–2012 Alto hatchback (first generation)

2000–2012hatchback (5 doors)137.6 in (3,495 mm)

The first-generation Maruti Suzuki Alto, built from 2000 to 2012, often has original or repainted panels by now. A test spot on the paint comes before a full wrap to check how the film adheres. Any areas of rust or peeling clear coat need repair first, and bodywork changes from previous owners can affect the wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on an Alto

A partial wrap on an Alto covers the roof, hood, or mirror caps as separate jobs. Alto chrome delete means covering the window trim and badges with black film. Paint protection film (PPF) in clear vinyl can be applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Maruti Suzuki Alto: body, cut-outs and film

The Maruti Suzuki Alto vinyl wrap suits its one body style, a five-door hatchback with a length of 137.6 in (3,495 mm). The compact size keeps the wrap area small compared with larger cars. A single-piece roof panel and relatively flat sides help the film lay down cleanly.

Alto wrap ideas start with the tailgate, where the rear glass is set into the panel and the film ends at the edge of the glass. The door handles, mirrors, and badges are removed or masked for a neat finish. The bumpers and rocker panels can be wrapped in sections to follow their curves.

To work out how much vinyl to wrap an Alto, use the first-generation body from 2000 to 2012 as the reference. This page lists only that generation, so the film estimate stays the same for all years covered. The five-door hatchback body did not change size between those production years.

Questions about wrapping a Maruti Suzuki Alto

How much vinyl does it take to wrap a Maruti Suzuki Alto?

A full wrap of a Maruti Suzuki Alto takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, allow about 51 ft (15.5 m) of the same width. These figures are for the first-generation hatchback covered on this page.

Can I wrap only the hood or the roof of an Alto?

Yes, you can wrap only the hood or the roof of an Alto. A partial wrap can cover the roof, hood, or mirror caps as separate jobs. The roof panel is small and flat, which makes it a straightforward piece to film.

Is an Alto hard to wrap?

An Alto is not especially hard to wrap, but the tailgate adds some work because the rear glass is set into the panel and the film ends at the edge of the glass. The car is only 137.6 in (3,495 mm) long, so there is less surface area than on a larger vehicle. The door handles and mirrors still need to come off or be cut around carefully.

How many generations of the Alto does this page cover?

This page covers one generation of the Alto, the first generation built from 2000 to 2012. It is the only body listed in the catalog for this car. All wrap figures and notes here refer to that five-door hatchback.