Wraps by car

Maruti Suzuki Omni wrap

The Maruti Suzuki Omni wrap covers the classic minivan body with a full vinyl wrap. This page gives the facts for the one generation made from 1984 to now. A full wrap of the Omni takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

1generations14.5 mof film for a full wrap

Maruti Suzuki Omni, first generation, factory photo
Maruti Suzuki Omni, first generation. Factory color shown.

Maruti Suzuki Omni wrap colors and ideas

  • Omni black wrap
  • Omni white wrap
  • Omni gray wrap
  • Omni silver wrap
  • Omni red wrap
  • Omni blue wrap
  • Omni green wrap
  • Omni yellow wrap
  • Omni orange wrap
  • Omni purple wrap
  • Omni pink wrap
  • Omni teal wrap
  • Omni brown wrap
  • Omni gold wrap
  • Omni chrome wrap
  • Omni color shift wrap
  • Omni carbon fiber wrap
  • Omni camo and patterned wrap

How much vinyl to wrap a Maruti Suzuki Omni

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–nowvan (4 doors)129.1 in (3,280 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Omni wrap cost factors

Omni wrap cost is set by the small size of the van, the film type, and the extra work on the sliding door tracks. The body is a short 129.1 in (3,280 mm) van, so the material need is about 48 ft (14.5 m) for standard cast film. A chrome or patterned wrap adds roughly 8 ft (2.5 m) and the labor to line up the film.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Omni wraps by generation

Swipe sideways. Tap a card for the full description.

Maruti Suzuki Omni, first generation, factory photo
Factory color shown

1984–now Omni van (first generation)

1984–nowvan (4 doors)129.1 in (3,280 mm)

The first generation Maruti Suzuki Omni, built from 1984 to now, is a four-door van. The sliding side doors mean the tracks stay bare and decide where the film is cut. On this body, the installer works around the track rails and cuts the vinyl just above them.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an Omni

Partial wrap on an Omni covers the roof, hood, or mirror caps as standalone jobs. Chrome delete changes the window trim and badges to black film. Paint protection film (PPF) is a clear film applied to the front end to shield the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Maruti Suzuki Omni: body, cut-outs and film

The Maruti Suzuki Omni vinyl wrap suits the single van body style produced since 1984. The slab-sided box shape keeps panel sizes small and the total area down at 129.1 in (3,280 mm) long. A small minivan needs less material than longer vans, which makes the job layout simple.

Omni wrap ideas start with the sliding side doors, where the tracks stay bare and the film is cut along them. The door handles and badges are removed or trimmed around. The front and rear bumpers are wrapped on the vehicle, and the window rubbers are masked for a clean edge.

How much vinyl to wrap an Omni depends on the film you pick and the coverage you want. The first generation body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a solid color change. Chrome or patterned film uses about 56 ft (17 m) because the pattern must be matched at the seams.

Questions about wrapping a Maruti Suzuki Omni

How much vinyl does it take to wrap a Maruti Suzuki Omni?

A full wrap of a Maruti Suzuki Omni takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl. That figure covers the entire minivan body with a single color. Patterned or chrome film needs about 56 ft (17 m) so the pattern can be matched.

Are the sliding doors of an Omni wrapped?

The sliding doors of an Omni are wrapped, but the tracks stay bare. The film is cut along the track edges so the door can still slide freely. The installer works around the rails on this first-generation van from 1984 to now.

Can I wrap only the hood or the roof of an Omni?

Yes, you can wrap only the hood or the roof of an Omni. A partial wrap on the hood or roof is a smaller job than a full color change. Mirror caps are another option for an Omni when you want a small accent.

Is an Omni hard to wrap?

An Omni is not hard to wrap, but the sliding door tracks add work. The tracks must stay bare, so the film is cut along them on this 129.1 in (3,280 mm) long van. The small body means about 48 ft (14.5 m) of film, which is easy to handle.