Wraps by car

Maruti Suzuki Versa wrap

The Maruti Suzuki Versa wrap is a vinyl wrap project for the first-generation minivan sold from 2001 to 2009. A full wrap of this tall, boxy body uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 7 ft (2 m) to the estimate.

1generations16.5 mof film for a full wrap

Maruti Suzuki Versa, first generation, factory photo
Maruti Suzuki Versa, first generation. Factory color shown.

Maruti Suzuki Versa wrap colors and ideas

  • Versa black wrap
  • Versa white wrap
  • Versa gray wrap
  • Versa silver wrap
  • Versa red wrap
  • Versa blue wrap
  • Versa green wrap
  • Versa yellow wrap
  • Versa orange wrap
  • Versa purple wrap
  • Versa pink wrap
  • Versa teal wrap
  • Versa brown wrap
  • Versa gold wrap
  • Versa chrome wrap
  • Versa color shift wrap
  • Versa carbon fiber wrap
  • Versa camo and patterned wrap

How much vinyl to wrap a Maruti Suzuki Versa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2009van (5 doors)144.7 in (3,675 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Versa wrap cost factors

Versa wrap cost depends mainly on the film area, the film type and the labor for the tall boxy body. A full wrap of this vehicle uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, or about 61 ft (18.5 m) for chrome or patterned film. The 75.0 in (1,905 mm) height adds setup time because the roof work needs a platform. Removing and reinstalling door handles, trims and badges also affects the final figure.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (75.0 in (1,905 mm)): the roof is wrapped from a platform.

Versa wraps by generation

Swipe sideways. Tap a card for the full description.

Maruti Suzuki Versa, first generation, factory photo
Factory color shown

2001–2009 Versa van (first generation)

2001–2009van (5 doors)144.7 in (3,675 mm)

The first generation Maruti Suzuki Versa (2001–2009) is a five-door van with sliding side doors. The tracks for those doors stay bare, so they decide where the film is cut and where the edges terminate. This body is the only production shape, so a wrap plan made for one Versa fits another.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (75.0 in (1,905 mm)): the roof is wrapped from a platform.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Versa

A partial wrap on a Maruti Suzuki Versa can cover the roof, hood or mirror caps without wrapping the whole van. Chrome delete is another option, where bright window trim and badges are covered with black film. Paint protection film (PPF) is a clear film applied to the front end to shield it from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Maruti Suzuki Versa: body, cut-outs and film

The Maruti Suzuki Versa vinyl wrap follows the shape of a five-door van that measures 144.7 in (3,675 mm) long and 75.0 in (1,905 mm) tall. Those dimensions mean a single installer needs a platform to reach the roof and extra care around the sliding door tracks. The flat side panels take film well, while the tall rear area is best handled after the roof section is finished.

Versa wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. The tall 75.0 in (1,905 mm) body also means the roof is wrapped from a platform. Window trims and badges are removed before the film goes on, then reinstalled so the edges stay clean.

How much vinyl to wrap a Versa depends on the film choice: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film needs about 61 ft (18.5 m) because the pattern must be matched across the tall panels. The single generation from 2001 to 2009 has one body style, so the figure stays the same for every Versa.

Questions about wrapping a Maruti Suzuki Versa

How much vinyl does it take to wrap a Maruti Suzuki Versa?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a Maruti Suzuki Versa. If you choose chrome or patterned film, the estimate goes up to about 61 ft (18.5 m) to match the pattern across the tall panels.

Are the sliding doors of a Versa wrapped?

No, the sliding doors of a Versa are not wrapped over the tracks, but the door panels themselves are covered. The tracks stay bare so the doors can still slide, and the film is cut along the edge of each track.

Can I wrap only the hood or the roof of a Versa?

Yes, you can wrap only the hood or the roof of a Versa as a partial wrap. Mirror caps are another small job that changes the look without covering the whole van.

Is a Versa hard to wrap?

The Versa has two features that add work for a wrapper: the sliding door tracks and the 75.0 in (1,905 mm) height. The tracks require careful cutting so the doors slide freely, and the tall roof means working from a platform.