Wraps by car

Maruti Suzuki Zen wrap

A Maruti Suzuki Zen wrap is a vinyl wrap applied to this compact first-generation hatchback produced from 1993 to 2006. The catalog covers one generation of the Zen, the only body style offered: a five-door hatchback. A full wrap of the Zen takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 51 ft (15.5 m).

1generations12.5 mof film for a full wrap

Maruti Suzuki Zen, first generation, factory photo
Maruti Suzuki Zen, first generation. Factory color shown.

Maruti Suzuki Zen wrap colors and ideas

  • Zen black wrap
  • Zen white wrap
  • Zen gray wrap
  • Zen silver wrap
  • Zen red wrap
  • Zen blue wrap
  • Zen green wrap
  • Zen yellow wrap
  • Zen orange wrap
  • Zen purple wrap
  • Zen pink wrap
  • Zen teal wrap
  • Zen brown wrap
  • Zen gold wrap
  • Zen chrome wrap
  • Zen color shift wrap
  • Zen carbon fiber wrap
  • Zen camo and patterned wrap

How much vinyl to wrap a Maruti Suzuki Zen

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2006hatchback (5 doors)139.2 in (3,535 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Zen wrap cost factors

Zen wrap cost depends on the size of the car, the film you pick and the work on the tailgate. The Zen is 139.2 in (3,535 mm) long, and a full wrap uses about 41 ft (12.5 m) of 60-inch (1.52 m) film. Chrome or patterned film requires about 51 ft (15.5 m), and the extra length adds to the cost. The tailgate with the rear glass in it needs careful cutting, which also affects the final cost.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Zen wraps by generation

Swipe sideways. Tap a card for the full description.

Maruti Suzuki Zen, first generation, factory photo
Factory color shown

1993–2006 Zen hatchback (first generation)

1993–2006hatchback (5 doors)139.2 in (3,535 mm)

The first-generation Maruti Suzuki Zen, built from 1993 to 2006, is a single five-door hatchback design. On a car of these years panels may be original or repainted, so a test spot comes before a full wrap. The tailgate with the rear glass in it means the film ends at the edge of the glass. The overall length of 139.2 in (3,535 mm) makes the Zen a compact wrap project.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Zen

A partial wrap on the Maruti Suzuki Zen can cover the roof, hood and mirror caps. A chrome delete covers the window trim and badges with black film, which is bright trim covered with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film and focus on the panels you want to change or protect.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Maruti Suzuki Zen: body, cut-outs and film

The Maruti Suzuki Zen vinyl wrap fits a small five-door hatchback with an overall length of 139.2 in (3,535 mm). The compact size keeps the panel count low, so a full wrap uses less film than a larger car. The tailgate includes the rear glass, which means the film ends at the edge of the glass. A single body style simplifies the wrap process, with no roof or bumper variations to account for.

Zen wrap ideas start with the tailgate, where the rear glass sits inside the panel and the film ends at the edge of the glass. The window trim and badges can be covered with black film for a chrome delete, which means bright trim is covered with black film. The mirror caps, hood and roof are straightforward panels that can be wrapped separately. The door handles and front bumper are other common cut-out points.

How much vinyl to wrap a Zen depends on the film type, not the body style. A full wrap of the first-generation Zen needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds waste because the pattern must be matched, bringing the total to about 51 ft (15.5 m). The Zen was produced from 1993 to 2006, and the body dimensions stayed the same across those years.

Questions about wrapping a Maruti Suzuki Zen

How much vinyl does it take to wrap a Maruti Suzuki Zen?

It takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film to wrap a Maruti Suzuki Zen. This is the film estimate for the newest body, the first-generation hatchback. If you use chrome or patterned film, plan for about 51 ft (15.5 m). The Zen is a compact five-door hatchback with a length of 139.2 in (3,535 mm).

Can I wrap only the hood or the roof of a Zen?

Yes, you can wrap only the hood or the roof of a Zen. A partial wrap of the roof, hood and mirror caps is an option that uses less film than a full wrap. You can also choose a chrome delete on the window trim and badges. Paint protection film can be applied to just the front end.

Is a Zen hard to wrap?

A Zen is not hard to wrap, but the tailgate needs extra care because the rear glass is set into it. The film ends at the edge of the glass, so cutting around it adds work. The compact size of 139.2 in (3,535 mm) keeps the job manageable. A full wrap takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

How many generations of the Zen does this page cover?

This page covers one generation of the Maruti Suzuki Zen, the first generation produced from 1993 to 2006. The Zen was sold as a five-door hatchback throughout those years. The body dimensions remained the same, so the wrap figures apply to all years.