Wraps by car

Maruti Suzuki Baleno wrap

The Maruti Suzuki Baleno wrap page covers the first generation built from 1999 to 2007 in sedan and wagon body styles. A vinyl wrap of the newest Baleno body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the sedan and 52 ft (16 m) for the wagon. For chrome or patterned film, plan up to about 67 ft (20.5 m).

1generations16 mof film for a full wrap

Maruti Suzuki Baleno, first generation, factory photo
Maruti Suzuki Baleno, first generation. Factory color shown.

Maruti Suzuki Baleno wrap colors and ideas

  • Baleno black wrap
  • Baleno white wrap
  • Baleno gray wrap
  • Baleno silver wrap
  • Baleno red wrap
  • Baleno blue wrap
  • Baleno green wrap
  • Baleno yellow wrap
  • Baleno orange wrap
  • Baleno purple wrap
  • Baleno pink wrap
  • Baleno teal wrap
  • Baleno brown wrap
  • Baleno gold wrap
  • Baleno chrome wrap
  • Baleno color shift wrap
  • Baleno carbon fiber wrap
  • Baleno camo and patterned wrap

How much vinyl to wrap a Maruti Suzuki Baleno

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2007sedan, wagon (4 or 5 doors)166.3 in (4,225 mm) to 172.2 in (4,375 mm)about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Baleno wrap cost factors

Baleno wrap cost depends on the body style, film type, and how many parts come off for installation. The wagon needs about 52 ft (16 m) of film versus about 48 ft (14.5 m) for the sedan, so a larger body raises the material amount. Gloss or satin cast film costs less in material than chrome or patterned film, which may take up to about 67 ft (20.5 m). The labor time changes with the tailgate, bumpers, and any trim removed before wrapping.

  • Film for a full wrap: about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Baleno wraps by generation

Swipe sideways. Tap a card for the full description.

Maruti Suzuki Baleno, first generation, factory photo
Factory color shown

1999–2007 Baleno sedan, wagon (first generation)

1999–2007sedan, wagon (4 or 5 doors)166.3 in (4,225 mm) to 172.2 in (4,375 mm)

The first generation Maruti Suzuki Baleno came as a sedan and a wagon from 1999 to 2007. The body style decides the panel plan and the film amount, with the wagon taking about 52 ft (16 m) and the sedan about 48 ft (14.5 m) of 60-inch cast film. The wagon's tailgate with integrated glass needs the film trimmed to the edge of the glass. Both styles share the same front end, so the hood, fenders, and bumper wrap in the same way.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Baleno

For a partial wrap on a Baleno, the roof, hood, and mirror caps are common single-panel jobs that change the look without a full wrap. A Baleno chrome delete covers the window trim and badges with black film to remove the brightwork. Paint protection film (PPF) on the front end uses clear film on the hood, fenders, and bumper to shield the paint from stone chips. These smaller wraps use less film and take less time than covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Maruti Suzuki Baleno: body, cut-outs and film

A Maruti Suzuki Baleno vinyl wrap begins with the body style because the sedan and wagon have different panel layouts. The sedan is 166.3 in (4,225 mm) long and needs about 48 ft (14.5 m) of film, while the wagon reaches 172.2 in (4,375 mm) and takes about 52 ft (16 m). The wagon's longer roof and taller tailgate add surface area, so the installer cuts larger sections for the rear. Counting every panel before cutting prevents film waste on this compact car.

Baleno wrap ideas start with the tailgate, which has the rear glass set into it and the film ends at the edge of the glass. Door handles, mirrors, and the antenna base need cut-outs so the vinyl lays flat around them. The wagon's roof rails, when present, come off before the roof wrap to keep the edges clean. The front and rear bumpers require relief cuts and inlays on the curved corners.

How much vinyl to wrap a Baleno depends on the body style and film choice, since the first generation offers sedan and wagon versions. The sedan takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, while the wagon takes about 52 ft (16 m) because of its longer roof and larger tailgate. Chrome or patterned film needs up to about 67 ft (20.5 m) to match the pattern direction and extra waste. Measuring each body panel before ordering gives an accurate total for this compact car.

Questions about wrapping a Maruti Suzuki Baleno

How much vinyl does it take to wrap a Maruti Suzuki Baleno?

A Maruti Suzuki Baleno takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the sedan and 52 ft (16 m) for the wagon. Chrome or patterned film needs up to about 67 ft (20.5 m) because of pattern matching and extra waste. The amount depends on the body style, since the wagon has a longer roof and tailgate than the sedan. Your installer should measure each panel before cutting.

Which Baleno body takes more film?

The wagon body takes more film than the sedan, about 52 ft (16 m) versus 48 ft (14.5 m) of 60-inch cast film. The wagon is longer at 172.2 in (4,375 mm) and has a taller tailgate with glass, adding surface area. The sedan is 166.3 in (4,225 mm) and needs less material for its trunk lid and rear bumper. The difference is about 4 ft (1.5 m) of film for a full wrap.

Can I wrap only the hood or the roof of a Baleno?

Yes, you can wrap only the hood or the roof of a Baleno as a partial wrap. Mirror caps are another small job that uses leftover film and changes the look. A chrome delete on the window trim and badges is also a partial option. These jobs need less film and time than a full wrap, but the panels must still be cleaned and prepped the same way.

Is a Baleno hard to wrap?

A Baleno is not hard to wrap for an experienced installer, but the tailgate adds work because the rear glass is set into it and the film ends at the edge of the glass. The wagon's longer roof and taller tailgate require more film than the sedan, about 52 ft (16 m) versus 48 ft (14.5 m). The front and rear bumpers have deep curves that need relief cuts and inlays. Taking off door handles, mirrors, and roof rails, if present, adds time but gives a cleaner result.