Wraps by car

Saab 600 wrap

This page covers the Saab 600 vinyl wrap. The Saab 600 was built as one generation, the first generation from 1980 to 1982. A full wrap of the five-door hatchback body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

Saab 600, first generation, factory photo
Saab 600, first generation. Factory color shown.

Saab 600 wrap colors and ideas

  • Saab 600 black wrap
  • Saab 600 white wrap
  • Saab 600 gray wrap
  • Saab 600 silver wrap
  • Saab 600 red wrap
  • Saab 600 blue wrap
  • Saab 600 green wrap
  • Saab 600 yellow wrap
  • Saab 600 orange wrap
  • Saab 600 purple wrap
  • Saab 600 pink wrap
  • Saab 600 teal wrap
  • Saab 600 brown wrap
  • Saab 600 gold wrap
  • Saab 600 chrome wrap
  • Saab 600 color shift wrap
  • Saab 600 carbon fiber wrap
  • Saab 600 camo and patterned wrap

How much vinyl to wrap a Saab 600

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1980–1982hatchback (5 doors)153.0 in (3,885 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Saab 600 wrap cost factors

Saab 600 wrap cost depends on the size of the car, the condition of the paint, and the film chosen. This model is a subcompact at 153.0 in (3,885 mm) long, so it uses less material than larger cars. Cast film needs about 46 ft (14 m) of 60-inch (1.52 m) film, and patterned film raises the amount to 56 ft (17 m).

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Saab 600 wraps by generation

Swipe sideways. Tap a card for the full description.

Saab 600, first generation, factory photo
Factory color shown

1980–1982 Saab 600 hatchback (first generation)

1980–1982hatchback (5 doors)153.0 in (3,885 mm)

The first generation Saab 600 was built from 1980 to 1982 as a five-door hatchback. On a car of these years, a test spot on the paint comes before a full wrap. Original or repainted panels may react differently, so the installer should try a small piece of film on each area first.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Saab 600

A partial wrap on a Saab 600 can cover the roof, the hood, or the mirror caps. Chrome delete is another option, with black film over the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saab 600: body, cut-outs and film

The Saab 600 vinyl wrap starts with a single body style, a five-door hatchback. The car is 153.0 in (3,885 mm) long, so the film pieces stay short and easy to handle. The tailgate is the largest panel, and the side glass runs long, leaving less painted area on the rear doors.

Saab 600 wrap ideas should account for the tailgate with the rear glass in it. The film ends at the edge of the glass, so the tailgate needs a clean cut around the window. Remove the door handles, mirrors, and badges for a neat install, and tuck film behind the trim and weather seals.

How much vinyl to wrap a Saab 600 depends on the body style and the film pattern. The first generation hatchback needs about 46 ft (14 m) of 60-inch (1.52 m) cast film for a solid color. Chrome or patterned film adds roughly 56 ft (17 m) because the pattern must be matched across panels.

Questions about wrapping a Saab 600

How much vinyl does it take to wrap a Saab 600?

About 46 ft (14 m) of 60-inch (1.52 m) cast film wraps a Saab 600 in a solid color. For chrome or patterned film the estimate is about 56 ft (17 m) because the pattern must be matched.

Can I wrap only the hood or the roof of a Saab 600?

Yes, you can wrap only the hood or the roof of a Saab 600. A partial wrap may also cover mirror caps, or you can choose chrome delete for the window trim and badges.

Is a Saab 600 hard to wrap?

A Saab 600 is not hard to wrap, but the tailgate adds work because the rear glass is in it. The film must be cut cleanly at the edge of the glass. The small size of the car, 153.0 in (3,885 mm) long, makes handling the pieces easier.

How many generations of the Saab 600 does this page cover?

This page covers one generation of the Saab 600, the first generation produced from 1980 to 1982.