Wraps by car

Saab 99 wrap

The Saab 99 wrap page covers the single generation produced from 1967 to 1984. A full vinyl wrap of this compact car takes about 52 ft (16 m) of 60-inch cast film for the hatchback. The sedan body needs about 56 ft (17 m) of the same film. Chrome or patterned film can require up to 64 ft (19.5 m).

1generations17 mof film for a full wrap

Saab 99, first generation, factory photo
Saab 99, first generation. Factory color shown.

Saab 99 wrap colors and ideas

  • Saab 99 black wrap
  • Saab 99 white wrap
  • Saab 99 gray wrap
  • Saab 99 silver wrap
  • Saab 99 red wrap
  • Saab 99 blue wrap
  • Saab 99 green wrap
  • Saab 99 yellow wrap
  • Saab 99 orange wrap
  • Saab 99 purple wrap
  • Saab 99 pink wrap
  • Saab 99 teal wrap
  • Saab 99 brown wrap
  • Saab 99 gold wrap
  • Saab 99 chrome wrap
  • Saab 99 color shift wrap
  • Saab 99 carbon fiber wrap
  • Saab 99 camo and patterned wrap

How much vinyl to wrap a Saab 99

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1984hatchback, sedan (2 or 3 or 4 doors)172.0 in (4,370 mm) to 178.5 in (4,534 mm)about 52 ft (16 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Saab 99 wrap cost factors

Saab 99 wrap cost depends on the size of the body, the film chosen, and the labor for prep. The hatchback needs about 52 ft (16 m) of 60-inch cast film and the sedan about 56 ft (17 m). A chrome or patterned film can push the film amount to 64 ft (19.5 m). The sedan is longer, so it takes more time to wrap the roof and rear quarters.

  • Film for a full wrap: about 52 ft (16 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: hatchback, sedan (2 or 3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Saab 99 wraps by generation

Swipe sideways. Tap a card for the full description.

Saab 99, first generation, factory photo
Factory color shown

1967–1984 Saab 99 hatchback, sedan (first generation)

1967–1984hatchback, sedan (2 or 3 or 4 doors)172.0 in (4,370 mm) to 178.5 in (4,534 mm)

The Saab 99 first generation was built from 1967 to 1984 with a hatchback and a sedan body. The hatchback tailgate includes the rear glass, so the panel plan has one large piece that stops at the glass edge. The sedan has a separate trunk lid and longer rear quarters. The body style decides the panel plan and the film amount.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Saab 99

A partial wrap on a Saab 99 can cover the roof, the hood, or the mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saab 99: body, cut-outs and film

A Saab 99 vinyl wrap has to handle a hatchback and a sedan body. The hatchback tailgate has the rear glass in it, so the film ends at the edge of the glass. The sedan is longer at 178.5 in (4,534 mm) compared with 172.0 in (4,370 mm) for the hatchback. Both body styles have two, three, or four doors, which changes the amount of film for the side panels.

Saab 99 wrap ideas often start with a tailgate that has the rear glass built in. The installer cuts the film along the edge of the glass and does not cover it. Side mirrors and door handles come off for a clean edge. The bumpers on this car are separate pieces that can be wrapped on the car or removed.

How much vinyl to wrap a Saab 99 depends on the body style. The hatchback uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, and the sedan uses about 56 ft (17 m). A chrome or patterned film adds waste, so the full amount can reach 64 ft (19.5 m). The difference between the two bodies is the sedan's longer rear panel.

Questions about wrapping a Saab 99

How much vinyl does it take to wrap a Saab 99?

A Saab 99 hatchback takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. The sedan body takes about 56 ft (17 m). That estimate is for a standard color change wrap without extra chrome or patterned film.

Which Saab 99 body takes more film?

The Saab 99 sedan takes more film than the hatchback. A full wrap of the sedan uses about 56 ft (17 m) of 60-inch cast film, while the hatchback uses about 52 ft (16 m). The difference comes from the sedan's longer body and separate trunk.

Can I wrap only the hood or the roof of a Saab 99?

Yes, you can wrap only the hood or the roof of a Saab 99. A partial wrap lists the roof, the hood, and the mirror caps as smaller jobs. Chrome delete is another partial option for the window trim and badges.

Is a Saab 99 hard to wrap?

A Saab 99 is not the hardest car to wrap, but the tailgate with the rear glass in it adds work. The film must stop at the edge of the glass on that one piece. Its compact size keeps the total area to about 52 ft (16 m) on the hatchback. The sedan is a little longer, so it adds a bit more film and time.