Wraps by car

Saab 9-3 wrap

The Saab 9-3 wrap page covers the 1998–2011 Saab 9-3 across two generations. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the wagon using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 70 ft (21.5 m).

2generations19 mof film for a full wrap

Saab 9-3, second generation, factory photo
Saab 9-3, second generation. Factory color shown.

Saab 9-3 wrap colors and ideas

  • Saab 9-3 black wrap
  • Saab 9-3 white wrap
  • Saab 9-3 gray wrap
  • Saab 9-3 silver wrap
  • Saab 9-3 red wrap
  • Saab 9-3 blue wrap
  • Saab 9-3 green wrap
  • Saab 9-3 yellow wrap
  • Saab 9-3 orange wrap
  • Saab 9-3 purple wrap
  • Saab 9-3 pink wrap
  • Saab 9-3 teal wrap
  • Saab 9-3 brown wrap
  • Saab 9-3 gold wrap
  • Saab 9-3 chrome wrap
  • Saab 9-3 color shift wrap
  • Saab 9-3 carbon fiber wrap
  • Saab 9-3 camo and patterned wrap

How much vinyl to wrap a Saab 9-3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2011convertible, sedan, wagon (2 or 4 or 5 doors)182.5 in (4,635 mm) to 183.9 in (4,670 mm)about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)
1998–2003convertible, hatchback (2 or 3 or 5 doors)182.3 in (4,630 mm)about 48 ft (14.5 m) for the convertible to 52 ft (16 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Saab 9-3 wrap cost factors

Saab 9-3 wrap cost depends on the body style, film choice, and the number of panels. Larger bodies like the wagon require more film, up to 62 ft (19 m) for a second-generation car. Labor for parts like a tailgate with glass or fog lamp cut-outs adds time. Chrome or patterned film increases material use, so the cost is higher than for a standard wrap.

  • Film for a full wrap: about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
  • Body: convertible, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2007: bumpers and lights differ between the versions, and so do the film cuts.

Saab 9-3 wraps by generation

Swipe sideways. Tap a card for the full description.

Saab 9-3, second generation, factory photo
Factory color shown

2002–2011 Saab 9-3 convertible, sedan, wagon (second generation)

2002–2011convertible, sedan, wagon (2 or 4 or 5 doors)182.5 in (4,635 mm) to 183.9 in (4,670 mm)

The second-generation Saab 9-3 convertible has a fabric top that is not wrapped. The vinyl wrap film ends where the fabric top begins. A folding hard top, if fitted, is wrapped as separate panels of its own. This means the open top does not get film, only the painted body panels.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Saab 9-3, first generation, factory photo
Factory color shown

1998–2003 Saab 9-3 convertible, hatchback (first generation)

1998–2003convertible, hatchback (2 or 3 or 5 doors)182.3 in (4,630 mm)

A first-generation Saab 9-3 from 1998–2003 may have original or repainted panels. Paint age matters, so a test spot comes before a full wrap. The installer checks adhesion on a small area to see if the film will bond properly. This step prevents lifting or damage on older paint.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the convertible to 52 ft (16 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Saab 9-3

A partial wrap on a Saab 9-3 can cover the roof, hood, or mirror caps. Chrome delete means covering window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saab 9-3: body, cut-outs and film

The Saab 9-3 vinyl wrap covers a mid-size convertible, sedan, wagon, or hatchback. Second-generation cars measure 182.5 in (4,635 mm) to 183.9 in (4,670 mm), with 2, 4, or 5 doors. First-generation cars measure 182.3 in (4,630 mm) and have 2, 3, or 5 doors. These sizes mean a full wrap uses about 48 to 62 ft (14.5 to 19 m) of film.

Saab 9-3 wrap ideas include color changes and partial accents. Some trims have fog lamps in the front bumper, so the installer cuts openings in the bumper film. A tailgate with the rear glass in it means the film ends at the edge of the glass. On a convertible with a fabric top, the film ends where the fabric begins.

How much vinyl to wrap a Saab 9-3 depends on the generation and body style. A first-generation hatchback takes about 52 ft (16 m), while a second-generation wagon takes about 62 ft (19 m). The second-generation convertible takes about 48 ft (14.5 m). For chrome or patterned film, add up to 4 ft (1.2 m) on the second generation and up to 14 ft (4.3 m) on the first generation.

Questions about wrapping a Saab 9-3

How much vinyl does it take to wrap a Saab 9-3?

A full wrap of a Saab 9-3 takes about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the wagon. These figures are for the second generation using 60-inch (1.52 m) cast film. The first generation takes slightly less: 48 ft (14.5 m) to 52 ft (16 m).

Is the top of a Saab 9-3 wrapped?

No, the fabric top of a Saab 9-3 convertible is not wrapped. The film ends where the fabric begins. A folding hard top, if present, is wrapped as separate panels.

Which years of the Saab 9-3 take the same film cuts?

The same film cuts apply to the 2002–2011 Saab 9-3, with a restyle in 2007. The 1998–2003 Saab 9-3 is a different body with its own cuts. Restyling does not change the basic panel shapes, so 2002–2006 and 2007–2011 cars can share patterns.

Which Saab 9-3 body takes more film?

The Saab 9-3 wagon takes more film than the convertible or hatchback. The second-generation wagon needs about 62 ft (19 m), while the convertible needs about 48 ft (14.5 m). The first-generation hatchback needs about 52 ft (16 m), which is more than the first-generation convertible.