Wraps by car

Saab 90 wrap

The Saab 90 wrap page covers the single generation built from 1984 to 1987, offered only as a two-door coupe. A full vinyl wrap of this mid-size body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 59 ft (18 m). The car's simple two-door shape keeps a wrap straightforward for an installer.

1generations14 mof film for a full wrap

Saab 90, first generation, factory photo
Saab 90, first generation. Factory color shown.

Saab 90 wrap colors and ideas

  • Saab 90 black wrap
  • Saab 90 white wrap
  • Saab 90 gray wrap
  • Saab 90 silver wrap
  • Saab 90 red wrap
  • Saab 90 blue wrap
  • Saab 90 green wrap
  • Saab 90 yellow wrap
  • Saab 90 orange wrap
  • Saab 90 purple wrap
  • Saab 90 pink wrap
  • Saab 90 teal wrap
  • Saab 90 brown wrap
  • Saab 90 gold wrap
  • Saab 90 chrome wrap
  • Saab 90 color shift wrap
  • Saab 90 carbon fiber wrap
  • Saab 90 camo and patterned wrap

How much vinyl to wrap a Saab 90

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1987coupe (2 doors)171.0 in (4,344 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Saab 90 wrap cost factors

A Saab 90 wrap cost depends on the amount of film a full coupe needs, about 46 ft (14 m) of 60-inch cast film. The final labor changes with how much of the car is covered, such as a roof-only wrap instead of a full body. Paint condition on a car from 1984 to 1987 can add prep work if old paint is flaking or uneven. The number of cut-outs for handles and trim also affects the time an installer spends.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Saab 90 wraps by generation

Swipe sideways. Tap a card for the full description.

Saab 90, first generation, factory photo
Factory color shown

1984–1987 Saab 90 coupe (first generation)

1984–1987coupe (2 doors)171.0 in (4,344 mm)

The first generation Saab 90 was built only from 1984 to 1987 as a two-door coupe, with no body changes in those years. Paint age on a car of these years may be original or repainted, and a test spot comes before a full wrap. Original paint from this era can be brittle, so your installer should check a small area of each panel. A repainted panel may have soft clear coat that lifts when film is removed.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Saab 90

A partial wrap on a Saab 90 can be the roof, the hood, or the mirror caps in any film. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as clear film on the front end to guard the hood and bumper from stone chips. Each of these jobs uses far less material than a full 46 ft (14 m) wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saab 90: body, cut-outs and film

The Saab 90 vinyl wrap is shaped by a coupe body of 171.0 in (4,344 mm), which is a moderate size for a full color change or repaint alternative. With only two doors and no long rear panels, film coverage is even and a single installer can manage each side in one piece. The mid-size class means the roof and hood are not overly large. Fewer body seams on a coupe give a smooth result with cast film.

Saab 90 wrap ideas start with the long side doors, which are each wrapped as one large piece of film without a lower cut line. You can leave door handles on and cut around them, or remove them for a cleaner edge. The bumpers and side mirrors are small enough to cover without disassembly. Window trim and badges are the main areas for a chrome delete in black film.

How much vinyl to wrap a Saab 90 is the same for every year of this generation, because the body was not changed from 1984 to 1987. A full wrap uses about 46 ft (14 m) of 60-inch film, and you can count that full amount for any 90 you find. A color that is not cast film or a pattern that needs alignment will need about 59 ft (18 m). There is no newer body to compare, so a film order stays the same.

Questions about wrapping a Saab 90

How much vinyl does it take to wrap a Saab 90?

A Saab 90 takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, plan for about 59 ft (18 m) to match the design. These figures come from the coupe body of the single generation built from 1984 to 1987.

Can I wrap only the hood or the roof of a Saab 90?

You can wrap only the hood or the roof of a Saab 90 as a partial job, along with the mirror caps if you want. A chrome delete on the window trim and badges is another smaller option. Clear paint protection film on the front end is also offered for this coupe. A partial wrap uses far less film than the 46 ft (14 m) a full body needs.

Is a Saab 90 hard to wrap?

A Saab 90 is not hard to wrap for an installer who has worked on older coupes, but the long side doors are each one large piece of film that needs care. The body is a mid-size 171.0 in (4,344 mm), so the hood and roof are not hard to cover. Paint from 1984 to 1987 may be original or repainted, and old paint can lift when you remove film. A test spot on each panel adds time before the full wrap.

How many generations of the Saab 90 does this page cover?

This page covers one generation of the Saab 90, the only one built, from 1984 to 1987. The body was a two-door coupe for all years. No other generation of the 90 was produced.