Wraps by car

Saab 93 wrap

This page covers the Saab 93, a subcompact coupe produced from 1956 to 1960 in one generation. A full vinyl wrap of this body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 54 ft (16.5 m) for the same coverage.

1generations13 mof film for a full wrap

Saab 93, first generation, factory photo
Saab 93, first generation. Factory color shown.

Saab 93 wrap colors and ideas

  • Saab 93 black wrap
  • Saab 93 white wrap
  • Saab 93 gray wrap
  • Saab 93 silver wrap
  • Saab 93 red wrap
  • Saab 93 blue wrap
  • Saab 93 green wrap
  • Saab 93 yellow wrap
  • Saab 93 orange wrap
  • Saab 93 purple wrap
  • Saab 93 pink wrap
  • Saab 93 teal wrap
  • Saab 93 brown wrap
  • Saab 93 gold wrap
  • Saab 93 chrome wrap
  • Saab 93 color shift wrap
  • Saab 93 carbon fiber wrap
  • Saab 93 camo and patterned wrap

How much vinyl to wrap a Saab 93

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1956–1960coupe (2 doors)157.8 in (4,007 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Saab 93 wrap cost factors

The Saab 93 wrap cost depends on the size of the car and the film chosen. A full wrap uses about 43 ft (13 m) of vinyl, and chrome or patterned film adds about 11 ft (3.5 m). The two long doors are large single panels, which affects labor time.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Saab 93 wraps by generation

Swipe sideways. Tap a card for the full description.

Saab 93, first generation, factory photo
Factory color shown

1956–1960 Saab 93 coupe (first generation)

1956–1960coupe (2 doors)157.8 in (4,007 mm)

The first generation Saab 93 was built from 1956 to 1960 as a two-door coupe. Paint on a car of these years may be original or repainted, so a test spot comes before a full wrap. The body is 157.8 in (4,007 mm) long and needs about 43 ft (13 m) of film.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Saab 93

A partial wrap on a Saab 93 covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saab 93: body, cut-outs and film

The Saab 93 vinyl wrap is shaped by its two-door coupe body and its 157.8 in (4,007 mm) length. The two long side doors each take one large piece of film. The simple body sides mean fewer seams and a cleaner result.

Saab 93 wrap ideas start with the two long side doors, each installed as one large piece of film. The roof, hood, and mirror caps can be wrapped as partial jobs. Bright window trim and badges can be covered with black film for a chrome delete.

To know how much vinyl to wrap a Saab 93, count the single generation produced from 1956 to 1960. Every body is the same two-door coupe style with the same overall length. Film estimates do not change between years of this generation.

Questions about wrapping a Saab 93

How much vinyl does it take to wrap a Saab 93?

It takes about 43 ft (13 m) of 60-inch (1.52 m) cast film to wrap a Saab 93. Chrome or patterned film needs about 54 ft (16.5 m). The estimate is for the coupe body produced from 1956 to 1960.

Can I wrap only the hood or the roof of a Saab 93?

Yes, you can wrap only the hood or the roof of a Saab 93. The partial wrap options for this car are the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges, or apply clear paint protection film to the front end.

Is a Saab 93 hard to wrap?

The Saab 93 is not hard to wrap because the body is a simple two-door coupe. The two long side doors are each one large piece of film, which adds work. The car is 157.8 in (4,007 mm) long, and the main challenge is handling the large door panels.

How many generations of the Saab 93 does this page cover?

This page covers one generation of the Saab 93. That generation was produced from 1956 to 1960 and is a two-door coupe. There are no other generations in the catalog.