Wraps by car

Suzuki Cappuccino wrap

This guide covers the Suzuki Cappuccino wrap, a single generation of the mini convertible built from 1991 to 1997. A full vinyl wrap of the newest body takes about 30 ft (9 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the order to about 36 ft (11 m).

1generations9 mof film for a full wrap

Suzuki Cappuccino, first generation, factory photo
Suzuki Cappuccino, first generation. Factory color shown.

Suzuki Cappuccino wrap colors and ideas

  • Cappuccino black wrap
  • Cappuccino white wrap
  • Cappuccino gray wrap
  • Cappuccino silver wrap
  • Cappuccino red wrap
  • Cappuccino blue wrap
  • Cappuccino green wrap
  • Cappuccino yellow wrap
  • Cappuccino orange wrap
  • Cappuccino purple wrap
  • Cappuccino pink wrap
  • Cappuccino teal wrap
  • Cappuccino brown wrap
  • Cappuccino gold wrap
  • Cappuccino chrome wrap
  • Cappuccino color shift wrap
  • Cappuccino carbon fiber wrap
  • Cappuccino camo and patterned wrap

How much vinyl to wrap a Suzuki Cappuccino

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1997convertible (2 doors)129.7 in (3,295 mm)about 30 ft (9 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 36 ft (11 m)

Cappuccino wrap cost factors

Cappuccino wrap cost depends on the film type, the condition of the paint, and the shop's labor. The car's 129.7 in (3,295 mm) body is small, so material use stays near 30 ft (9 m) for a full wrap. Chrome or patterned film raises material needs to about 36 ft (11 m) and adds installation time.

  • Film for a full wrap: about 30 ft (9 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 36 ft (11 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Cappuccino wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Cappuccino, first generation, factory photo
Factory color shown

1991–1997 Cappuccino convertible (first generation)

1991–1997convertible (2 doors)129.7 in (3,295 mm)

The first generation Suzuki Cappuccino has an open top that is not wrapped in a color change. A fabric top stays unwrapped and the film ends where the fabric begins at the body line. A folding hard top, if fitted, is wrapped as separate panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 30 ft (9 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 36 ft (11 m).

Roof, hood, chrome delete and PPF on a Cappuccino

A partial wrap on the Cappuccino can cover the hood, mirror caps, or rear deck. Cappuccino chrome delete covers bright window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to reduce stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Suzuki Cappuccino: body, cut-outs and film

The Suzuki Cappuccino vinyl wrap follows the convertible body style and its 129.7 in (3,295 mm) length. The small two-door body means fewer panels and less film than on larger cars. The fabric top is not wrapped, so the whole job centers on the metal body below the beltline.

Cappuccino wrap ideas start with the cut-outs and removable parts a shop plans for. The door handles, badges, and mirrors come off or are cut around for a clean edge. The convertible roof is left uncovered, and the film ends where the fabric begins.

How much vinyl to wrap a Cappuccino depends on the film type and waste. The first generation body uses about 30 ft (9 m) of 60-inch (1.52 m) cast film for a standard color change. Patterned or chrome film adds about 20 percent to the order due to matching.

Questions about wrapping a Suzuki Cappuccino

How much vinyl does it take to wrap a Suzuki Cappuccino?

It takes about 30 ft (9 m) of 60-inch (1.52 m) cast film to wrap a Suzuki Cappuccino. Chrome or patterned film increases the amount to about 36 ft (11 m).

Is the top of a Cappuccino wrapped?

No, the fabric top of a Cappuccino is not wrapped. The film ends where the fabric begins at the body line. A folding hard top, if fitted, is wrapped as separate panels.

Can I wrap only the hood or the roof of a Cappuccino?

Yes, you can wrap only the hood or the roof of a Cappuccino. A partial wrap covers the hood, mirror caps, or rear deck as smaller jobs. Chrome delete covers window trim and badges with black film.

Is a Cappuccino hard to wrap?

A Cappuccino is small but has details that add work, like a convertible top and curved panels. The fabric top is not wrapped, so the film must end cleanly along the body line. Its 129.7 in (3,295 mm) length keeps the job smaller than a full-size car.