Wraps by car

Suzuki Equator wrap

The Suzuki Equator wrap page covers the 2008–2012 pickup in its single generation and the film a full wrap of the newest body takes. A complete color change uses about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl wrap. Plan on roughly 72 ft (22 m) if you choose chrome or patterned film.

1generations20 mof film for a full wrap

Suzuki Equator, first generation, factory photo
Suzuki Equator, first generation. Factory color shown.

Suzuki Equator wrap colors and ideas

  • Equator black wrap
  • Equator white wrap
  • Equator gray wrap
  • Equator silver wrap
  • Equator red wrap
  • Equator blue wrap
  • Equator green wrap
  • Equator yellow wrap
  • Equator orange wrap
  • Equator purple wrap
  • Equator pink wrap
  • Equator teal wrap
  • Equator brown wrap
  • Equator gold wrap
  • Equator chrome wrap
  • Equator color shift wrap
  • Equator carbon fiber wrap
  • Equator camo and patterned wrap

How much vinyl to wrap a Suzuki Equator

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2012pickup (2 or 4 doors)206.6 in (5,248 mm) to 220.1 in (5,591 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Equator wrap cost factors

Equator wrap cost depends on the size of the truck, the film type, and the amount of disassembly the body needs. The truck is 206.6 in (5,248 mm) to 220.1 in (5,591 mm) long, which sets the base amount of film. The tall body requires a platform, adding labor to the roof section. A color change wrap in cast film is the baseline, while chrome or patterned film raises the material figure.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: pickup (2 or 4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Equator wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Equator, first generation, factory photo
Factory color shown

2008–2012 Equator pickup (first generation)

2008–2012pickup (2 or 4 doors)206.6 in (5,248 mm) to 220.1 in (5,591 mm)

The first-generation Suzuki Equator from 2008–2012 is the only body in the catalog, and its pickup bed defines how it is wrapped. The cab and the bed are two bodies for the film, and the inside of the bed stays bare. The wrap stops at the bed rails and the tailgate interior. This separation means the installer can wrap the cab and bed independently.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Equator

A partial wrap on a Suzuki Equator can cover just the roof, hood, or mirror caps for a smaller color change. An Equator chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material and can be done without wrapping the whole truck.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Suzuki Equator: body, cut-outs and film

The Suzuki Equator vinyl wrap has to cover a pickup body that measures from 206.6 in (5,248 mm) to 220.1 in (5,591 mm) depending on cab and bed length. The tall body at 70.1 in (1,780 mm) means the roof is wrapped from a platform. Two-door and four-door cabs share the same wrap approach, but the longer wheelbases add surface area. A full wrap treats the cab and the bed as two separate bodies.

Equator wrap ideas start with handling the pickup bed, where the cab and the bed are wrapped as two bodies and the inside of the bed is not wrapped. The door handles, mirrors, and emblems come off for a clean install. The tall roof requires a platform, and the bed rails benefit from extra attention. Cut-outs are needed around the tailgate handle and the fuel door.

When you ask how much vinyl to wrap an Equator, the answer is about 66 ft (20 m) of 60-inch (1.52 m) cast film for a standard color change. The first generation from 2008–2012 is the only body in the catalog, so film needs do not change between years. Longer beds and four-door cabs push the estimate toward the upper end of the length range. Patterned or chrome film adds roughly 10 percent to the total.

Questions about wrapping a Suzuki Equator

How much vinyl does it take to wrap a Suzuki Equator?

A full Suzuki Equator wrap takes about 66 ft (20 m) of 60-inch (1.52 m) cast film for a standard color change. If you choose chrome or patterned film, plan for about 72 ft (22 m). The longer bed and four-door cab sit at the upper end of that range.

Is the bed of an Equator wrapped?

No, the inside of the bed of an Equator is not wrapped. The cab and the bed are wrapped as two bodies, and the film stops at the top of the bed rails and the outside of the tailgate. The bed interior stays bare.

Can I wrap only the hood or the roof of an Equator?

Yes, you can wrap only the hood or the roof of an Equator. A partial wrap covers the roof, hood, or mirror caps as separate smaller jobs. An Equator chrome delete covers the window trim and badges, and PPF is a clear front-end option.

Is an Equator hard to wrap?

An Equator adds work because of its size and its pickup bed. The tall body at 70.1 in (1,780 mm) means the roof is wrapped from a platform. The cab and the bed are two separate bodies, and the inside of the bed is not wrapped.