Wraps by car

Suzuki Palette wrap

The Suzuki Palette wrap is a vinyl wrap project for this 2008–2013 minivan. Suzuki built the Palette in one generation, a five-door van body. A full wrap of this body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Suzuki Palette, first generation, factory photo
Suzuki Palette, first generation. Factory color shown.

Suzuki Palette wrap colors and ideas

  • Palette black wrap
  • Palette white wrap
  • Palette gray wrap
  • Palette silver wrap
  • Palette red wrap
  • Palette blue wrap
  • Palette green wrap
  • Palette yellow wrap
  • Palette orange wrap
  • Palette purple wrap
  • Palette pink wrap
  • Palette teal wrap
  • Palette brown wrap
  • Palette gold wrap
  • Palette chrome wrap
  • Palette color shift wrap
  • Palette carbon fiber wrap
  • Palette camo and patterned wrap

How much vinyl to wrap a Suzuki Palette

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2013van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Palette wrap cost factors

The Palette wrap cost depends on the film type, the size of the van, and the labor for its sliding doors. The body is 133.7 in (3,395 mm) long and needs about 51 ft (15.5 m) of cast film. Chrome or patterned film raises the material amount to about 57 ft (17.5 m). The sliding door tracks add time because the film must be cut along them.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Palette wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Palette, first generation, factory photo
Factory color shown

2008–2013 Palette van (first generation)

2008–2013van (5 doors)133.7 in (3,395 mm)

The first generation Suzuki Palette was produced from 2008 to 2013 as a five-door van. Its sliding side doors present a unique wrap detail: the door tracks stay bare. The film is cut along the tracks, which keeps the doors working and gives a neat edge. The compact body length of 133.7 in (3,395 mm) means a full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Palette

For a smaller Palette wrap job, you can wrap just the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film, leaving the sliding door tracks bare. Clear paint protection film (PPF) on the front end is another option. These partial wraps use less film than a full wrap and still change the look or protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Suzuki Palette: body, cut-outs and film

The Suzuki Palette vinyl wrap covers a compact minivan body that is 133.7 in (3,395 mm) long. The five-door van shape has a tall roof and large flat side panels. Its sliding side doors add extra work because the door tracks stay bare and the film must be cut along them.

For Palette wrap ideas, the sliding side doors are the main thing to plan around. The door tracks stay bare, so the film does not cover them. The installer cuts the film along the tracks for a clean edge. The tall roof and five-door layout mean visible seams at the door cut lines and around the tailgate.

To estimate how much vinyl to wrap a Palette, use the film figure for the first generation. A full wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 57 ft (17.5 m). The extra film covers waste from matching patterns around the sliding doors and tall body sides.

Questions about wrapping a Suzuki Palette

How much vinyl does it take to wrap a Suzuki Palette?

A full wrap of a Suzuki Palette takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. This figure is for the first generation body, which measures 133.7 in (3,395 mm) long. If you choose chrome or patterned film, plan for about 57 ft (17.5 m).

Are the sliding doors of a Palette wrapped?

Yes, the sliding doors of a Palette are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors operate freely. This leaves a clean line where the track area is unwrapped.

Can I wrap only the hood or the roof of a Palette?

Yes, you can wrap only the hood or the roof of a Palette as a partial wrap. A partial wrap can include the roof, hood, or mirror caps. A chrome delete covers window trim and badges, and clear film can protect the front end.

Is a Palette hard to wrap?

A Palette wrap requires extra care because of its sliding side doors. The door tracks stay bare, so the installer must cut the film along the tracks while keeping the doors working. The tall five-door body and 133.7 in (3,395 mm) length mean more material and careful alignment on the large side panels.