Wraps by car

Suzuki Reno wrap

This page covers the Suzuki Reno, a compact hatchback produced for one generation from 2004 to 2008. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. The guide is intended for owners planning a Suzuki Reno wrap.

1generations15 mof film for a full wrap

Suzuki Reno, first generation, factory photo
Suzuki Reno, first generation. Factory color shown.

Suzuki Reno wrap colors and ideas

  • Reno black wrap
  • Reno white wrap
  • Reno gray wrap
  • Reno silver wrap
  • Reno red wrap
  • Reno blue wrap
  • Reno green wrap
  • Reno yellow wrap
  • Reno orange wrap
  • Reno purple wrap
  • Reno pink wrap
  • Reno teal wrap
  • Reno brown wrap
  • Reno gold wrap
  • Reno chrome wrap
  • Reno color shift wrap
  • Reno carbon fiber wrap
  • Reno camo and patterned wrap

How much vinyl to wrap a Suzuki Reno

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2008hatchback (5 doors)169.1 in (4,295 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Reno wrap cost factors

Reno wrap cost depends on film choice, paint condition, and how much of the car is wrapped. A full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 61 ft (18.5 m). Paint age can add preparation time, as a 2004–2008 car may have original or repainted panels. Removing and reinstalling trim pieces also affects the final labor.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Reno wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Reno, first generation, factory photo
Factory color shown

2004–2008 Reno hatchback (first generation)

2004–2008hatchback (5 doors)169.1 in (4,295 mm)

The first generation Suzuki Reno was built from 2004 to 2008. On a car of these years, panels may be original or repainted, and a test spot comes before a full wrap. This check shows whether the film will bond evenly to the paint. If the paint is weak, prep work may be needed first.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Reno

A partial wrap on a Reno can cover the roof, hood, or mirror caps. Chrome delete for the window trim and badges is another option that uses less film. Paint protection film (PPF) can be applied as clear film on the front end. These smaller jobs let an owner change one area without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Suzuki Reno: body, cut-outs and film

The Suzuki Reno came as a five-door hatchback with a length of 169.1 in (4,295 mm). A single body style means a Suzuki Reno vinyl wrap follows one consistent pattern. The compact size keeps the wrap area moderate for a hatchback. The tailgate includes the rear glass, so the film ends at the edge of the glass.

Reno wrap ideas often start with the tailgate and its integrated rear glass. The film must be trimmed neatly at the edge of the glass, which calls for careful knifeless tape work. Door handles, mirrors, and badges need cut-outs or removal for a clean install. The five-door layout adds four door handle recesses to work around.

There is only one generation, so panels and dimensions stayed the same across all years. The RQ420 body code identifies the same shell from 2004 to 2008. Planning how much vinyl to wrap a Reno is simpler than for a multi-generation model. Paint condition varies on a car of these years, and a test spot should be done before a full wrap.

Questions about wrapping a Suzuki Reno

How much vinyl does it take to wrap a Suzuki Reno?

A full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. This is the estimate for the newest body, which is the only generation of the Reno. For chrome or patterned film, plan on about 61 ft (18.5 m).

Can I wrap only the hood or the roof of a Reno?

Yes, you can wrap only the hood or the roof of a Reno. A partial wrap can cover the roof, hood, or mirror caps. These smaller jobs are often done as a color change or for paint protection. Chrome delete on the window trim and badges is another partial option.

Is a Reno hard to wrap?

The Reno is a manageable wrap, but the tailgate with the rear glass in it adds work. The film must end at the edge of the glass, so precise cutting is needed. The compact size of 169.1 in (4,295 mm) keeps the total area moderate. Door handles and badges also require cut-outs or removal.

How many generations of the Reno does this page cover?

This page covers one generation of the Reno, from 2004 to 2008. Suzuki produced the model for a single generation only. All years share the same hatchback body style.