Wraps by car

Suzuki Samurai wrap

This page covers a Suzuki Samurai wrap including the first generation built from 1981 to 2003. The Samurai is a compact three-door SUV with one generation in this catalog. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

1generations14.5 mof film for a full wrap

Suzuki Samurai, first generation, factory photo
Suzuki Samurai, first generation. Factory color shown.

Suzuki Samurai wrap colors and ideas

  • Samurai black wrap
  • Samurai white wrap
  • Samurai gray wrap
  • Samurai silver wrap
  • Samurai red wrap
  • Samurai blue wrap
  • Samurai green wrap
  • Samurai yellow wrap
  • Samurai orange wrap
  • Samurai purple wrap
  • Samurai pink wrap
  • Samurai teal wrap
  • Samurai brown wrap
  • Samurai gold wrap
  • Samurai chrome wrap
  • Samurai color shift wrap
  • Samurai carbon fiber wrap
  • Samurai camo and patterned wrap

How much vinyl to wrap a Suzuki Samurai

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–2003SUV (3 doors)136.6 in (3,470 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Samurai wrap cost factors

Samurai wrap cost depends on film type, surface area, and prep work on this small SUV. The Samurai needs about 48 ft (14.5 m) of cast film for a full color change. Paint condition on a 1981–2003 vehicle can add correction time before wrapping. Chrome delete or partial wraps use less material but still require disassembly of some trim.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Samurai wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Samurai, first generation, factory photo
Factory color shown

1981–2003 Samurai SUV (first generation)

1981–2003SUV (3 doors)136.6 in (3,470 mm)

The first generation Suzuki Samurai (1981–2003) is the only body style in this catalog. Paint age varies widely on a vehicle from these years, so panels may be original or repainted. A test spot on the paint is necessary before committing to a full wrap. That check shows whether the film will adhere safely without lifting old paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Samurai

A partial wrap on a Samurai can cover the roof, hood, or mirror caps without wrapping the whole SUV. Chrome delete covers window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear option for the front end to guard against stone chips. These smaller jobs suit the Samurai's simple, flat panels well.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Suzuki Samurai: body, cut-outs and film

A Suzuki Samurai vinyl wrap uses less film than most modern SUVs because the body is small. The Samurai measures 136.6 in (3,470 mm) long and has only three doors. The two long side doors allow large, uninterrupted film pieces. Its boxy shape reduces complex stretching around curved panels.

Samurai wrap ideas start with planning for the tailgate and the two long side doors. The tailgate includes rear glass, so the film ends at the edge of the glass. Each side door is covered with one large piece of film. Removing the spare tire and door handles gives a cleaner edge around these areas.

When you count how much vinyl to wrap a Samurai, the single generation simplifies the estimate. The first generation ran from 1981 to 2003 with only minor trim changes. A full wrap of any year uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the total to about 54 ft (16.5 m).

Questions about wrapping a Suzuki Samurai

How much vinyl does it take to wrap a Suzuki Samurai?

A full Suzuki Samurai wrap takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. That figure covers the first generation body from 1981 to 2003. Chrome or patterned film needs about 54 ft (16.5 m) because pattern matching wastes material.

Can I wrap only the hood or the roof of a Samurai?

Yes, you can wrap only the hood or the roof of a Samurai. Many owners choose a partial wrap for those areas to add contrast without a full color change. Mirror caps are another small section that works well on this SUV.

Is a Samurai hard to wrap?

A Samurai is moderate to wrap because of its tailgate and long side doors. The tailgate includes rear glass, so the installer must trim film precisely along the glass edge. Each of the two side doors is one large piece, which takes care to align without wrinkles. The small size, 136.6 in (3,470 mm) long, reduces total material but not the care needed on flat panels.

How many generations of the Samurai does this page cover?

This page covers one generation of the Suzuki Samurai, the first generation from 1981 to 2003. The Samurai had a long production run but kept the same basic three-door body. All wrap estimates here apply to that single generation.