Wraps by car

Suzuki Splash wrap

A Suzuki Splash wrap covers the five-door hatchback with a full vinyl wrap. The single generation built from 2008 to 2015 has one body style with a restyling in 2012. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. A wrap with chrome or patterned film needs about 57 ft (17.5 m) of the same width.

1generations15 mof film for a full wrap

Suzuki Splash, first generation, factory photo
Suzuki Splash, first generation. Factory color shown.

Suzuki Splash wrap colors and ideas

  • Splash black wrap
  • Splash white wrap
  • Splash gray wrap
  • Splash silver wrap
  • Splash red wrap
  • Splash blue wrap
  • Splash green wrap
  • Splash yellow wrap
  • Splash orange wrap
  • Splash purple wrap
  • Splash pink wrap
  • Splash teal wrap
  • Splash brown wrap
  • Splash gold wrap
  • Splash chrome wrap
  • Splash color shift wrap
  • Splash carbon fiber wrap
  • Splash camo and patterned wrap

How much vinyl to wrap a Suzuki Splash

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2015hatchback (5 doors)146.3 in (3,715 mm) to 148.6 in (3,775 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Splash wrap cost factors

Splash wrap cost depends on the amount of film and the time for preparation. A full wrap takes about 49 ft (15 m) of cast film, with chrome or patterned film pushing that to about 57 ft (17.5 m). The five-door hatchback body has four doors, a tailgate, and bumpers that all need separate pieces. Some trims with fog lamps add cut-outs in the bumper film.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2012: bumpers and lights differ between the versions, and so do the film cuts.

Splash wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Splash, first generation, factory photo
Factory color shown

2008–2015 Splash hatchback (first generation)

2008–2015hatchback (5 doors)146.3 in (3,715 mm) to 148.6 in (3,775 mm)

The restyling in 2012 changed the bumpers and lights, so film cut for one version does not fit the other. The earlier 2008–2011 cars and the later 2012–2015 cars share the same basic body but have different front and rear ends. A wrap kit made for one version will not match the other at the bumper edges. If you wrap both versions, count the bumper shapes as separate patterns.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Splash

A partial wrap on a Suzuki Splash can cover the roof, hood, or mirror caps. Splash chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can go on the front end as a clear film. These smaller jobs need less film than a full wrap and still change the look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Suzuki Splash: body, cut-outs and film

A Suzuki Splash vinyl wrap has to follow the compact shape of this five-door hatchback. The body is between 146.3 in (3,715 mm) and 148.6 in (3,775 mm) long, so film seams stay short. The small size means fewer panels to cover than on a larger car. The five-door layout adds four door handles and mirror caps to wrap.

When you plan Splash wrap ideas, look at the tailgate with the rear glass in it. The film ends at the edge of the glass, so the tailgate wrap has a clean border. Some trims have fog lamps in the front bumper, which need cut-outs in the bumper film. The door handles and mirror caps come off for a neater finish.

If you want to know how much vinyl to wrap a Splash, compare the two versions of this generation. A full wrap of a 2008–2011 car or a 2012–2015 car takes about the same amount of film. The restyling in 2012 changed the bumpers and lights, so film cut for one version does not fit the other. The total film needed is about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Suzuki Splash

How much vinyl does it take to wrap a Suzuki Splash?

A Suzuki Splash takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, plan for about 57 ft (17.5 m). The five-door hatchback has a compact body that fits well within a standard roll.

Which years of the Splash take the same film cuts?

The 2008–2011 and 2012–2015 Splash models take different film cuts at the bumpers and lights. The restyling in 2012 changed those parts, so film for one version does not fit the other. The rest of the body panels are the same between the two versions.

Can I wrap only the hood or the roof of a Splash?

Yes, you can wrap only the hood or the roof of a Splash. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges. Paint protection film (PPF) can go on the front end as a clear film.

Is a Splash hard to wrap?

A Splash is not the hardest car to wrap, but it has a few tricky points. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Some trims have fog lamps in the front bumper, which need cut-outs. The small size of the car, at about 146.3 to 148.6 in (3,715 to 3,775 mm) long, makes panel access easy.