Wraps by car

Suzuki Twin wrap

The Suzuki Twin wrap page covers the first generation of the Suzuki Twin, a mini hatchback produced from 2003 to 2005. A full vinyl wrap of the newest body uses about 33 ft (10 m) of 60-inch (1.52 m) cast film. Choosing chrome or patterned film increases the material to about 38 ft (11.5 m).

1generations10 mof film for a full wrap

Suzuki Twin, first generation, factory photo
Suzuki Twin, first generation. Factory color shown.

Suzuki Twin wrap colors and ideas

  • Twin black wrap
  • Twin white wrap
  • Twin gray wrap
  • Twin silver wrap
  • Twin red wrap
  • Twin blue wrap
  • Twin green wrap
  • Twin yellow wrap
  • Twin orange wrap
  • Twin purple wrap
  • Twin pink wrap
  • Twin teal wrap
  • Twin brown wrap
  • Twin gold wrap
  • Twin chrome wrap
  • Twin color shift wrap
  • Twin carbon fiber wrap
  • Twin camo and patterned wrap

How much vinyl to wrap a Suzuki Twin

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2005hatchback (3 doors)107.7 in (2,735 mm)about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m)

Twin wrap cost factors

Twin wrap cost depends on the size of the car, the film type, and the amount of panel preparation. The Suzuki Twin is a mini hatchback with a length of 107.7 in (2,735 mm), so it uses less material than a larger vehicle. The film estimate is about 33 ft (10 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film raises the film amount to about 38 ft (11.5 m).

  • Film for a full wrap: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Twin wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Twin, first generation, factory photo
Factory color shown

2003–2005 Twin hatchback (first generation)

2003–2005hatchback (3 doors)107.7 in (2,735 mm)

The first generation Suzuki Twin from 2003–2005 requires a paint inspection before wrapping because panels may be original or repainted. On a car of these years, you should do a test spot on the paint before a full wrap. This step checks whether the film will bond properly to older surfaces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m).

Roof, hood, chrome delete and PPF on a Twin

A partial wrap on the Suzuki Twin covers the roof, hood, or mirror caps without wrapping the whole car. For a Twin chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is also an option for the clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Suzuki Twin: body, cut-outs and film

A Suzuki Twin vinyl wrap is a compact job because the car has one body style, a three-door hatchback, and a length of 107.7 in (2,735 mm). The small panels and the tailgate reduce the amount of film compared to a larger car. The two long side doors are each covered with one large piece of film, which keeps seams away from the middle of the body.

Twin wrap ideas start with the tailgate, where the rear glass is part of the metal panel and the film ends at the edge of the glass. The two long side doors are wrapped as single pieces, so a contrasting color on the doors can change the look quickly. Mirror caps and the roof are small areas that work well with a partial wrap.

How much vinyl to wrap a Twin is simple to estimate because the Suzuki Twin was sold in only one generation from 2003 to 2005. There are no earlier or later body styles to compare, so the film amount stays the same for every car. A full wrap needs about 33 ft (10 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, order about 38 ft (11.5 m).

Questions about wrapping a Suzuki Twin

How much vinyl does it take to wrap a Suzuki Twin?

It takes about 33 ft (10 m) of 60-inch (1.52 m) cast film to wrap a Suzuki Twin. This figure is for a full wrap of the first generation hatchback. If you choose chrome or patterned film, the estimate is about 38 ft (11.5 m).

Can I wrap only the hood or the roof of a Twin?

Yes, you can wrap only the hood or the roof of a Twin. A partial wrap on this car covers the roof, hood, or mirror caps as separate jobs. You can also cover the window trim and badges with a chrome delete.

Is a Twin hard to wrap?

A Twin is a small car, but it has details that add work to a wrap. The tailgate includes the rear glass in the panel, so the film must end exactly at the edge of the glass. The two long side doors are each one large piece of film, which requires careful handling.

How many generations of the Twin does this page cover?

This page covers one generation of the Suzuki Twin. The model was produced from 2003 to 2005 and was sold only as a first generation. Therefore, all Twin hatchbacks share the same body style and film amounts.