Wraps by car

Talbot 1510 wrap

The Talbot 1510 wrap page covers the single generation of the Talbot 1510 built from 1980 to 1984. A full vinyl wrap of this five-door hatchback takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The car measures 167.0 in (4,242 mm) long and is classed as a mid-size.

1generations16.5 mof film for a full wrap

Talbot 1510, first generation, factory photo
Talbot 1510, first generation. Factory color shown.

Talbot 1510 wrap colors and ideas

  • Talbot 1510 black wrap
  • Talbot 1510 white wrap
  • Talbot 1510 gray wrap
  • Talbot 1510 silver wrap
  • Talbot 1510 red wrap
  • Talbot 1510 blue wrap
  • Talbot 1510 green wrap
  • Talbot 1510 yellow wrap
  • Talbot 1510 orange wrap
  • Talbot 1510 purple wrap
  • Talbot 1510 pink wrap
  • Talbot 1510 teal wrap
  • Talbot 1510 brown wrap
  • Talbot 1510 gold wrap
  • Talbot 1510 chrome wrap
  • Talbot 1510 color shift wrap
  • Talbot 1510 carbon fiber wrap
  • Talbot 1510 camo and patterned wrap

How much vinyl to wrap a Talbot 1510

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1980–1984hatchback (5 doors)167.0 in (4,242 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Talbot 1510 wrap cost factors

Talbot 1510 wrap cost depends on the condition of the paint, the amount of film needed, and the complexity of the tailgate. The hatchback body requires about 54 ft (16.5 m) of 60-inch (1.52 m) film for a full wrap. Chrome delete or patterned film raises the material amount to about 62 ft (19 m).

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Talbot 1510 wraps by generation

Swipe sideways. Tap a card for the full description.

Talbot 1510, first generation, factory photo
Factory color shown

1980–1984 Talbot 1510 hatchback (first generation)

1980–1984hatchback (5 doors)167.0 in (4,242 mm)

The first generation Talbot 1510 ran from 1980 to 1984 and needs a paint check before wrapping. Panels on a car of these years may be original or repainted, and a test spot comes before a full wrap. This step shows whether the film will bond properly to the surface.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Talbot 1510

Partial wrap jobs on a Talbot 1510 suit the roof, hood, or mirror caps. A Talbot 1510 chrome delete covers window trim and badges with black film. Paint protection film (PPF) on the front end is another smaller job that protects the nose from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Talbot 1510: body, cut-outs and film

A Talbot 1510 vinyl wrap is a mid-size job centered on one body style, a five-door hatchback. Its length of 167.0 in (4,242 mm) makes the large side panels the main film consumers. The single body style means every wrap follows the same basic layout.

Talbot 1510 wrap ideas include handling the tailgate with care because the rear glass is set into it. The film must end at the edge of the glass for a clean look. Installers also remove door handles and trim to tuck film edges properly.

How much vinyl to wrap a Talbot 1510 depends only on this one generation, built from 1980 to 1984. The catalog contains no earlier or later generations to compare. A standard color change wrap of the full body uses about 54 ft (16.5 m) of film.

Questions about wrapping a Talbot 1510

How much vinyl does it take to wrap a Talbot 1510?

About 54 ft (16.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Talbot 1510. The estimate is for the full body of the hatchback. Chrome or patterned film increases the amount to about 62 ft (19 m).

Can I wrap only the hood or the roof of a Talbot 1510?

Yes, you can wrap only the hood or the roof of a Talbot 1510. Partial wraps are done on the roof, hood, or mirror caps. The size of such panels is much smaller than the full car, so less film is used.

Is a Talbot 1510 hard to wrap?

A Talbot 1510 is not especially hard to wrap, but the tailgate with the rear glass adds work. The film must end exactly at the edge of the glass on the tailgate. The mid-size length of 167.0 in (4,242 mm) also means large side panels to handle.

How many generations of the Talbot 1510 does this page cover?

This page covers one generation of the Talbot 1510. The catalog lists only the first generation, built from 1980 to 1984. There are no other generations shown for this model.