Wraps by car

Talbot Samba wrap

This page covers the Talbot Samba wrap, the vinyl wrap process for the subcompact Talbot Samba built from 1981 to 1986. The catalog lists one generation of the Samba. A full wrap of the newest body takes about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback.

1generations11.5 mof film for a full wrap

Talbot Samba, first generation, factory photo
Talbot Samba, first generation. Factory color shown.

Talbot Samba wrap colors and ideas

  • Samba black wrap
  • Samba white wrap
  • Samba gray wrap
  • Samba silver wrap
  • Samba red wrap
  • Samba blue wrap
  • Samba green wrap
  • Samba yellow wrap
  • Samba orange wrap
  • Samba purple wrap
  • Samba pink wrap
  • Samba teal wrap
  • Samba brown wrap
  • Samba gold wrap
  • Samba chrome wrap
  • Samba color shift wrap
  • Samba carbon fiber wrap
  • Samba camo and patterned wrap

How much vinyl to wrap a Talbot Samba

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1986convertible, hatchback (3 doors)138.0 in (3,506 mm)about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m)

Samba wrap cost factors

Samba wrap cost depends on the film chosen and the amount of material for this car. A full wrap of the newest body takes about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback. Using chrome or patterned film can require up to about 51 ft (15.5 m). The cost also changes with the labor for wrapping the long side doors and working around the rear glass.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).
  • Body: convertible, hatchback (3 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Samba wraps by generation

Swipe sideways. Tap a card for the full description.

Talbot Samba, first generation, factory photo
Factory color shown

1981–1986 Samba convertible, hatchback (first generation)

1981–1986convertible, hatchback (3 doors)138.0 in (3,506 mm)

The first generation Talbot Samba has an open top that is not wrapped when the body is a convertible. The fabric top is left uncovered, and the vinyl film ends where the top begins. For the hatchback, the tailgate with the rear glass in it means the film ends at the edge of the glass.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Samba

Partial wrap options for the Talbot Samba include the roof, hood, and mirror caps. Chrome delete is available for the window trim and badges, covering the bright trim with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Talbot Samba: body, cut-outs and film

A Talbot Samba vinyl wrap depends on the body style and size of this car. The convertible and three-door hatchback are both 138.0 in (3,506 mm) long. The two long side doors mean each door is one large piece of film. The tailgate with the rear glass in it makes the hatchback slightly larger to wrap.

Samba wrap ideas include planning for cut-outs and parts that come off. The convertible has a fabric top that is not wrapped, so the film ends where it begins. The tailgate with the rear glass in it means the film ends at the edge of the glass. Each long side door is wrapped as one large piece of film.

For someone counting film, the Talbot Samba has only one generation, so the sizes stay the same across the production run. The body length remains 138.0 in (3,506 mm) from 1981 to 1986. The convertible and hatchback differ slightly in film needs, but the generation does not change. Knowing the body style is enough to estimate how much vinyl to wrap a Samba.

Questions about wrapping a Talbot Samba

How much vinyl does it take to wrap a Talbot Samba?

It takes about 38 ft (11.5 m) to 41 ft (12.5 m) of vinyl to wrap a Talbot Samba, depending on the body style. The newest body is the first generation, which includes a convertible and a hatchback. The convertible needs about 38 ft (11.5 m), and the hatchback needs about 41 ft (12.5 m).

Is the top of a Samba wrapped?

No, the top of a Samba is not wrapped when it is a fabric convertible top. The film ends where the fabric top begins, so the top is left uncovered. For a folding hard top, the panels are wrapped individually.

Which Samba body takes more film?

The hatchback takes more film than the convertible. The hatchback needs about 41 ft (12.5 m) of film, while the convertible needs about 38 ft (11.5 m). The hatchback's tailgate with the rear glass adds more surface area to wrap.

Can I wrap only the hood or the roof of a Samba?

Yes, you can wrap only the hood or the roof of a Samba as a partial wrap. Partial wrap options also include the mirror caps and the front end with paint protection film. Chrome delete covers the window trim and badges with black film.