Wraps by car

Talbot Horizon wrap

This guide covers a Talbot Horizon wrap and what a vinyl wrap on this car involves. The Talbot Horizon is a subcompact hatchback produced for one generation, from 1978 to 1986. The car is a five-door hatchback with a length of 155.9 in (3,960 mm). A full wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 57 ft (17.5 m).

1generations14 mof film for a full wrap

Talbot Horizon, first generation, factory photo
Talbot Horizon, first generation. Factory color shown.

Talbot Horizon wrap colors and ideas

  • Horizon black wrap
  • Horizon white wrap
  • Horizon gray wrap
  • Horizon silver wrap
  • Horizon red wrap
  • Horizon blue wrap
  • Horizon green wrap
  • Horizon yellow wrap
  • Horizon orange wrap
  • Horizon purple wrap
  • Horizon pink wrap
  • Horizon teal wrap
  • Horizon brown wrap
  • Horizon gold wrap
  • Horizon chrome wrap
  • Horizon color shift wrap
  • Horizon carbon fiber wrap
  • Horizon camo and patterned wrap

How much vinyl to wrap a Talbot Horizon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1978–1986hatchback (5 doors)155.9 in (3,960 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Horizon wrap cost factors

The Horizon wrap cost depends on the size of the car and the film you choose. At 155.9 in (3,960 mm) long, the Horizon is a subcompact, so it uses less film than a larger car: about 46 ft (14 m) of standard cast film. A chrome or patterned film requires about 57 ft (17.5 m), which affects the total cost. The cost also varies with the condition of the paint, the number of parts removed, and the finish you select.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Horizon wraps by generation

Swipe sideways. Tap a card for the full description.

Talbot Horizon, first generation, factory photo
Factory color shown

1978–1986 Horizon hatchback (first generation)

1978–1986hatchback (5 doors)155.9 in (3,960 mm)

The first generation Talbot Horizon, produced from 1978 to 1986, is the only body style covered here. The car is a five-door hatchback with a length of 155.9 in (3,960 mm). On a car of these years, the panels may be original or repainted, so a test spot comes before a full wrap. The film estimate for a full wrap is about 46 ft (14 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Horizon

A partial wrap on a Talbot Horizon can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges can be covered with black film. Paint protection film (PPF) is another option: a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be a way to change the look without covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Talbot Horizon: body, cut-outs and film

The Talbot Horizon vinyl wrap is shaped by its five-door hatchback body and 155.9 in (3,960 mm) length. The car has a simple two-box profile with large side panels and a relatively flat roof. The tailgate includes the rear glass, so the film ends at the edge of the glass rather than wrapping around a separate frame. This body style means the main surfaces are mostly flat and easy to cover, with no deep recesses or complex curves.

For Horizon wrap ideas, the main areas that need cut-outs or come off are the tailgate and its rear glass. The tailgate has the rear glass in it, so the film must be trimmed exactly at the edge of the glass and cannot wrap around the glass itself. Door handles, mirrors, and badges also need to be removed or cut around for a clean finish. The front and rear bumpers are separate plastic pieces that can be wrapped on or off the car.

To know how much vinyl to wrap a Horizon, note that this page covers a single generation from 1978 to 1986. Because there is only one body generation, the film estimate stays the same: about 46 ft (14 m) of 60-inch (1.52 m) cast film for a standard color change. If you choose chrome or patterned film, plan for about 57 ft (17.5 m) to allow pattern matching and extra waste. The five-door hatchback body has no long-wheelbase or estate versions, so the length is always 155.9 in (3,960 mm).

Questions about wrapping a Talbot Horizon

How much vinyl does it take to wrap a Talbot Horizon?

A full wrap of a Talbot Horizon takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 57 ft (17.5 m) to allow for matching patterns and extra waste. The car is 155.9 in (3,960 mm) long, so these figures are based on the five-door hatchback body.

Can I wrap only the hood or the roof of a Horizon?

Yes, you can wrap only the hood or the roof of a Horizon. These are common partial wrap areas, along with mirror caps. A partial wrap uses less film than a full wrap and can be a good way to change the look of the car.

Is a Horizon hard to wrap?

The Horizon is not especially hard to wrap, but the tailgate with the rear glass in it adds some work. The film must end at the edge of the glass, so the installer has to trim carefully around that area. The car is small at 155.9 in (3,960 mm), which means fewer square feet to cover than on a larger vehicle.

How many generations of the Horizon does this page cover?

This page covers one generation of the Talbot Horizon, produced from 1978 to 1986. There is only a single generation in the catalog, with a five-door hatchback body style. The car has a length of 155.9 in (3,960 mm).